AEMC

AEMC CA832 2121.23 CA832 Sound Level MeterEasy one-hand operationMeasures sound according to the sensitivity of the human earMAX functionThree measurement range from 35 to 130dBAccuracy ±1.5dBTwo time weighting curves: slow (550ms) and fast (55ms)Two frequency weighting curves: A and CAuxiliary output for recordingTripod mountable2000-count backlit LCDLightweight and compactIncludes rugged, shockproof, protective, dirt resistant holster SpecificationMeasurement Range35db to 80db / 50db to 100db / 80db to 130dbMeasurement Rate2.5 times per secondFrequency Range31.5Hz to 8000HzAccuracy±1.5dbResolution0.1dbPrecision±2.0dbDisplay2000 countSensor Type0.5" electric (prepolarized) condenser microphone. True RMS measurement with independent frequency weightiness.Applicable StandardIEC 651 type 2/ANSI S 1.4 type 2/JIS C 1502Auxiliary OutletDC output 10mV/db - 50Ω / AC output 1.0Vrms - 600Ω;Frequency WeightingCurves A and CTime WeightingS (slow) and F (fast)Dimensions9.3" x 2.38" x 1.5" (237mm x 60.5mm x 38mm)Weight8.11 oz (230g) including batteryPower Source9 Volt batteryAlat Pengukur Intensitas Kebisingan

AEMC AL834 2126.14 Simple Logger II Four Channel TRMS Current Data LoggerIncludes four integral AmpFlex® flexible current probes that will measure from up to 3000A TRMS with 0.5A resolutionDual range 300/3000A user selectable per channel64 samples per cycleProgrammable storage rates from 125ms to 1 per day4 user selectable storage modesStores up to 1,000,000 measurements in non-volatile memoryPowered by standard Alkaline batteries for a period of up to 180 daysLightweight, compact and weatherproof6 LED indicators quickly and clearly display logger statusWireless Bluetooth communication(Bluetooth module included)EN 61010-1; 600V CAT IV, 1000V CAT IIISpecificationsModelAL834ElectricalChannelsFourInputCaptive AmpFlex® AC Current Flexible SensorsRange300A ac3000A acAccuracy(50/60Hz)0 to 5A unspecified5 to 300A: ±(1% of Reading + 0.5A)0 to 15A unspecified15 to 3000A: ±(1% of Reading + 1A)Resolution0.1A ac0.5A acSample Rate64 samples/cycleStorage RateProgrammable from 125ms to 1 per dayStorage ModesStart/Stop, FIFO, Extended Recording Mode (XRM™ ), Store on AlarmRecording Length15 minutes to 8 weeks, programmable using DataView®Memory1,000,000 measurements (2MB) The recorded data is stored in non-volatile memory and will be retained even if the battery is low or removed.CommunicationBluetooth (Class 2)Power Source4 x 1.5V C-cell Alkaline batteries (included)Battery Lifeup to 180 days(dependent on storage rate/recording length)MechanicalDimensions5.904 x 5.904 x 3.568" (150 x 150 x 91mm) without SensorMax Conductor Size0.8" (203mm)Weight (with battery)3.9 lbs (1.77kg)CaseUL94-V0VibrationIEC 68-2-6 (1.5mm, 10 to 55Hz)ShockIEC 68-2-27 (30G)DropIEC 68-2-32 (1m)Multimeter

AEMC CL601 2126.01 Clamp-On AC Current Simple Logger II0 to 600ArmsTrue RMS measurements64 samples per cycleSelf contained, no exposed connectionsOverload indicationOptically isolated USB 2.0 output (cable included)One button operationAlarm functionStores up to 240,000 measurements in non-volatile memory5 LED indicators quickly and clearly display logger statusIncludes FREE DataView software for data storage, real-time display, analysis and report generation300V Cat.IV, 600V Cat.IIIELECTRICALChannelsOneInputSplit CT – AC CurrentMeasurement Range0 to 600AACResolution0.1AAccuracy (50/60Hz)5 to 50A: ±(1% of Reading +1A)50 to 400A: ±(1% of Reading +0.5A)400 to 600A for duration <10min: ±(3% of Reading +1A)Sample Rate64 samples/cycleStorage RateProgrammable from 125mS to 7 daysStorage ModesStart/Stop, FIFO and Extended Recording Mode* (XRM™)Recording Length1 minute to 8 weeks, programmable using DataViewMemory240,000 measurement (512KB)AlarmYesHarmonicsYes - up to the 50thWaveformsYesReal-time Trend ViewingYesReport GenerationConfigurable with DataView softwareCommunicationUSB 2.0Communication Rate115200 bpsPower Source**2x1.5V AA-cell alkaline batteriesBattery Life100 hours to >45 days(dependent on sample rate and recording length)AC Current500μAResolution10nAMECHANICALDimensions9.25 x 4.0 x 1.63" (235 x 102 x 41mm)Weight (with battery)1.07 lbs (17.1 oz)CasePolycarbonate UL94-V0Maximum Conductor Size1 conductor - Ø 1.65" (42 mm)2 conductor - Ø 1.00" (25.4 mm) eachJaw Opening1.65" (42mm) maxVibrationIEC 68-2-6 (1.5mm 10 to 55Hz)ShockIEC 68-2-27 (30G)DropIEC 68-2-32 (1m)ENVIRONMENTALOperating Temperature14° to 122°F (-10° to 50°C)Storage Temperature-4° to 140°F (-20° to 60°C)Relative Humidity0 to 85% @ 95°F (35°C), Non-condensingAltitude2000mSAFETYSafety RatingEN 61010300V Cat. IV, 600V Cat. IIIClamp Meter

AEMC 2126.02 L101 Simple Logger II AC Current LoggerCompatible standard current probes with voltage output and BNC connection64 samples per cycleProgrammable storage rates from 8 every second to 1 every day3 user selectable storage modesStores up to 240,000 measurements in non-volatile memoryPowered by standard Alkaline batteriesLightweight, compact, fits anywhere5 LED indicators quickly and clearly display Logger statusIncludes DataView software for data storage, real-time waveform display, analysis and report generationIsolated USB communication50V Cat III Simple Logger II Model L101ElectricalChannelsOneInput ConnectionBNCMeasurement Range0 to 1VResolution0.1mVAccuracy(50/60Hz) 0 to 10mV: unspecified10 to 50mV: ±(0.5% of Reading + 1mV)50 to 1000mV: ±(0.5% of Reading + 0.5mV)Sample Rate64 samples/cycleStorage RateProgrammable from 125ms to 1 dayStorage ModesStart/Stop, FIFO and Extended Recording Mode (XRM™)Recording Length15 minutes to 8 weeks, programmable using DataViewMemory240,000 measurements (512KB) - The recorded data is stored in non-volatile memory and will be retained even if the battery is low or removed.CommunicationUSB 2.0 optically isolatedPower Source2 x 1.5V AA-cell alkaline batteriesBattery Life100 hours to >45 days (dependent on sample rate and recording length)MechanicalDimensions5.38 x 2.75 x 1.28" (136 x 70 x 32mm)Max Conductor SizeCurrent probe dependentWeight (with battery)6.4 oz (181 grams)CaseUL94-V0VibrationIEC 68-2-6 (1.5mm, 10 to 55Hz)ShockIEC 68-2-27 (30G)DropIEC 68-2-32 (1m)Multimeter

AEMC L562 Two-Channel Voltage and Current Simple Logger II, 600V Voltage, 1V Current2 input channelsVoltage: 0 to 600VAC TRMSCurrent: compatible with current probes with voltage outputs64 samples per cycle3 user selectable storage modes; Stop when full, FIFO, XRM®Programmable storage rates from 8 every second to 1 every dayStores up to 240,000 measurements in non-volatile memoryPowered by two standard AA Alkaline batteriesLightweight, compact, fits anywhere5 LED indicators quickly and clearly display Logger statusIncludes DataView software FREE for data storage, real-time waveform display, analysis and report generation300V Cat IV; 600V Cat III with a safety rated current probe attachedSimple Logger II Model L562ElectricalChannelsTwoConnectionCurrent ChannelVoltage ChannelInput ConnectionBNCTwo Recessed Banana JacksInput Range* 0 to 1V (for use with current probes with a voltage output)0 to 600VacResolution0.1mA0.1VAccuracy0 to 10mV unspecified10 to 50mV: ±(0.5% of Reading + 1mV)50 to 1000mV: ±(0.5% of Reading + 0.5mV)0 to 5V unspecified5 to 50V: ±(0.5% of Reading + 1V)50 to 600V: ±(0.5% of Reading + 0.5V)Measurement Input Voltage5Vrms (-7.07V peak to + 7.07V peak max)1000VSample Rate64 samples/cycleStorage RateProgrammable from 125ms to 1 dayStorage TechniqueStop when full, FIFO and Extended Recording Mode (XRM™)Recording Length15 minutes to 8 weeks, programmable using DataViewMemory240,000 measurement (512KB). The recorded data is stored in non-volatile memory and will be retained even if the battery is low or removed.CommunicationUSB 2.0 optically isolatedPower Source**2 x 1.5V AA-cell alkaline batteriesBattery Life100 hours to > 45 days (dependent on sample rate and recording length)MechanicalDimensions5.38 x 2.75 x 1.28" (136 x 70 x 32mm)Max Conductor SizeCurrent probe dependentWeight (with battery)6.4 oz (181 grams)CaseUL94-VOVibrationIEC 68-2-6 (1.5mm, 10 to 55Hz)ShockIEC 68-2-27 (30G)DropIEC 68-2-32 (1m) In The BoxTypa A to 5-pin mini-B USB 2MDataView Software CDTwo 1.5V AA-cell Alkaline batteriesSet of two color-coded 5 ft voltage leads, color-coded alligator clips (red/black)User manualVoltage Detector

AEMC L452 2-Channel Data Logger (100mV / 1v / 10VDC) with LCD, Event and Pulse, DataView SoftwareCurrent and Voltage data logger (4-20mA, ±100mV, ±1V, ±10V) user selectableEvent counter, dry contact closure and logical level (pulse) detectionReal-time display of measurementsIncludes FREE DataView® software for data storage, real-time display, analysis & report generationWireless Bluetooth communicationApplicationsDetermine machinery run or down timesDetermine event sequencingCount events and recordsRecord event durationMachine load monitoringRecord process variablesELECTRICALChannelsTwoInputSix-pin terminal stripMeasurementsDC CurrentDC VoltageEventPulseRange4 to 20mA100mV, 1V, 10VN/AN/AAccuracy (% of Reading)±(0.25% + 5cts)±(0.5% + 1cts)N/AN/AResolution0.01mA0.1mV, 1mV, 10mVN/AN/AInput Impedance100Ω1MΩ1MΩN/ASample PeriodDC inputs: 200, 400, 600, or 800ms; or from 1 to 60 secondsPulse detection: 10msStorage ModesStart/Stop (ends when memory is full or when the recording stop time is reached, whichever comes first)Recording Length10 minutes to 1 year, set via instrument front panel or through DataView®Memory32MB internal Flash memory (up to 1024 logging sessions, 16M samples)CommunicationBluetooth 2.1, Class 1 or USB 2.0Power SourceExternal: via USB connectorInternal: 2 x AA NIMH rechargeable batteries (charges through USB port)Battery LifeUp to 180 days (dependent on storage rate/recording length)MECHANICALDimensions1.275 x 2.578 x 5.413" (32.4 x 65.5 x 137.5mm)Weight (with battery)190g (6.7oz) with batteriesVibrationIEC 68-2-6 (1.5mm, 10 to 55Hz)ShockIEC 68-2-27 (30G)ENVIRONMENTALOperating Temperature32 to 122°F (0 to 50°C)Humidity16 to 85%ProtectionIP 40 (instrument alone); IP 20 (instrument with terminal strip)Multimeter

AEMC L261 Voltage Datalogger - Max Voltage: 600 V, Min Voltage: 0 V, Power Source: BatteryTRMS voltage recording up to 600VAC/DC64 samples per cycleProgrammable storage rates from 8 every second to 1 every day3 user selectable storage modesStores up to 240,000 measurements in non-volatile memoryPowered by standard Alkaline batteriesLightweight, compact, fits anywhereLED indicators quickly and clearly display Logger statusIncludes DataView software for data storage, real-time waveform display, analysis and report generationIsolated USB communication300V Cat IV; 600V Cat III Simple Logger II Model L261ElectricalChannelsOneInput ConnectionTwo Recessed 4mm Banana JacksMeasurement Range0 to 600VResolution0.1VAccuracy (50/60Hz)0 to 5V: unspecified5 to 50V: ± (0.5% of Reading + 1V)50 to 600V: ± 0.5% of Reading + 0.5V)Sample Rate64 samples/cycleStorage RateProgrammable from 125ms to 1 dayStorage ModesStart/Stop, FIFO and Extended Recording Mode (XRM)Recording Length15 minutes to 8 weeks, programmable using DataViewMemory240,000 measurements (512KB) - The recorded data is stored in non-volatile memory and will be retained even if the battery is low or removed.CommunicationUSB 2.0 optically isolatedPower Source2 x 1.5V AA-cell alkaline batteriesBattery Life100 hours to >45 days (dependent on sample rate and recording length)MechanicalDimensions4.94 x 2.75 x 1.28" (125 x 70 x 32mm)Weight (with battery)6.4 oz (181 grams)CaseUL94-V0VibrationIEC 68-2-6 (1.5mm, 10 to 55Hz)Voltage Detector

AEMC DL-1081 2134.62 Universal Input Data Logger8 universal analog input channels8 digital I/Os (individually configured as inputs or outputs)2 relay outputs (NO, NC and common)RS485 interface (Modbus master or slave)24VDC output to power up to eight 4 to 20mA transmittersEthernet interface for LAN and internet useUSB-device interface for configuring, monitoring and downloadUSB-host interface for logged data retrieval through a USB flash driveUp to 32 configurable alarmsUp to 128 virtual channelsDetachable displayUp to 100 channels can be logged at a user configurable rateData downloading through the configuration software or through the freely distributed downloaded DLL SpecificationImageMODELSDL-1080DL-1081ELECTRICALInternal Memory2MBPower100 to 240VAC, 50/60Hz. 20VA (Max)Analog Channels Input ImpedanceThermocouples / Pt100 / Pt1000 / mV: > 2MΩmA: 15Ω + 1.5VV: 1.1MΩAccuracyThermocouples J, K, T, E and N: 0.2% of the span ± 1°CThermocouples R, S and B: 0.2% of the span ± 3°CPt100, Pt1000, 0 to 20mA, 4 to 20mA, 0 to 20mV,0 to 50mV, 0 to 60mV, -20 to 20mV, 0 to 5V and0 to 10V: 0.15% of the spanExcitation CurrentPt100s: 360μA;Pt1000s: 320μAMaximum Pt100/Pt1000 Compensated Cable Resistance40ΩDigital InputsLogic level "0": from 0 to 0.8VDCLogic level "1": from 3 to 30VDCMaximum Input Voltage30VDCInput Current @ 30VDC (typical)3mADigital OutputsMaximum output voltage: 30VDCMaximum output current: 200mAMaximum relay current: 3A @ 250VAC; 3A @ 30VDCStorage Ratefrom 1ms to 24 hoursMaximum ChannelLogged 100Supported Modbus CommandsRead Coil Status (01h)Read Holding Registers (03h)Write Single Coil (05h)Write Single Register (06h)Write Multiple Registers (0Fh)ENVIRONMENTALOperating Temperature32° to 122°F (0 to 50°C)Relative Humidity80% up to 85°F (30°C)For temperatures higher than 85°F (30°C),decrease 3% per °CAltitude< 2000mProtectionIP20 Multimeter

AEMC BR07 2131.25 Resistance Decade BoxRotary switch selectorStop position to prevent accidental switching from 10 to 0Seven decades: 1 to 10MΩMax Current: 0.1mAMale ground (earth) terminal with safety jackOutputs on Ø 4mm safety terminalsGround jumper lead EN 61010-2-031, 150V Cat. II Pollution Degree 2Accuracy 1%GeneralDecade Range1Ω to 10Ω / 10Ω to 100Ω / 100Ω to 1kΩ / 1Ω to 10kΩ / 10Ω to 100kΩ / 100kΩ to 1MΩ / 1Ω to 10MΩMaximum Current (mA DC) Decade700mA / 200mA / 70mA / 20mA / 7mA / 1mA / 0.1mAResistance Range1Ω to 11.11111kΩAccuracy1%Multimeter

AEMC 6610 2121.12 Phase Rotation MeterNon-contact detector clips – No metal contact points to promote greater safetyDual functions: Open phase and phase sequence detectionDesigned for checking a wider range of 3-phase power source from 75V to 1000V ACDetects frequency range from 45 to 65HzPhase rotation LED display lights with buzzer indicator (ABC or BAC)Bright LED indication Live or Open Phase (A, B, C)Brightness adjustments for better visibility in dimly lit areas or direct sunlightIncludes three attached color-coded test leads with non-metallic alligator sensor clips for easy connection to the device under testMagnetic mounting feature on back cover for easy attachment to metal cabinetsLow battery indicator ELECTRICALModel6610Measurement PrincipleStatic inductionFrequency Range45 to 65HzAuto-Off5 min. after power on without detectionLow Battery WarningPower LED flashes at ≤ 7V ± 0.2VPower Supply1 x 9V alkaline batteryMECHANICALCable LengthApprox. 2.5 ft (800mm)Dimensions5.0 x 2.8 x 1.8" (128 x 72 x 46mm)Weight0.82 lbs (375g) including batteryENVIRONMENTALOperating Temperature & Humidity14° to 122°F (-10° to 50°C) Max. 80% R.H.Storage Temperature & Humidity-4° to 140°F (-20° to 60°C) Max. 80% R.H.SAFETYSafety RatingsEN 61010-1, 1000V CAT III / 600V CAT IV, EN 61326-1Multimeter