BACHARACH

Bacharach 0013-3000 Draftrite Pocket GaugeDraftrite Pocket GaugeThese dependable, service-free draft gauges are small, inexpensive and easy to use. The Draftrite pocket gauge can be utilized by both contractors and service technicians for determining draft pressure problems in commercial and residential settings.This pocket size instrument is conveniently held in one hand when being used, making it extremely suitable for heating contractors and service technicians. The free-floating pointer indicates sudden changes from draft to pressure caused by "puffbacks." Suitable for checking flue pipe, chimney, fire box, smoke hood, smoke pipe draft, draft regulator, oil burner firing rate, and basement ventilation.In The BoxTwo sections of draft tubeLeatherette CaseManufacturer SpecsDraftrite Pocket Gauges:Item NumberRange0013-3000+0.10 to 0 to -0.14" W0013-3001+0.05 to 0 to -0.25" W0013-3002+2.5 to 0 to -3.5 mm W0013-3003+1.5 to 0 to -6.5 mm W Gas Analyzers

Bacharach 2020-8000 ECO-2020 Refrigerant Recovery UnitPowerful 2-cylinder (1 hp), oilless air-cooled compressor provides quiet-running performanceFaster recovery rates! 6.35 lbs./min. liquid and 0.55 lbs./min. vapor (R22 / AHRI 740 ratings)Compatible with all Category III, IV and V refrigerants, including R410a liquid and vapor (AHRI 740 defined)*Integrated purge function minimizes the risk of cross contamination and loss of refrigerantCompact, lightweight design with easy-carry shoulder strapDurable condenser provides better heat dispersion on hot days: important for R410aSingle knob operation and easy-to-read indicators for vacuum, 80% shut-off, high pressure and more.RefrigerantsCategory IIIR12, R134a, R401c, R406a, R500Category IVR22, R401a, R401b, R402b, R407c, R407d, R408a, R409a, R411a,R411b, R412a, R502, R509Category VR402a, R404a, R407a, R407b, R410a, R507Compressor Type2-Cylinder, Oilless, Air-cooledMotor1HP, 1,450 RPM @ 50Hz; 1,750 RPM @ 60HzVacuum Rating15” Hg+High Pressure Shut-Off558 PSI (38.5 bar; 3,850 kPA)Low Pressure Shut-Off≥14 ±2 HgAuto 80% Tank Shut-OffYes, optional featureR410a Recovery RatesVapor Recovery Rate: 0.55 lbs./min. (0.25 kg/min.)Liquid Recovery Rate: 5.71 lbs./min. (2.59 kg/min.)Liquid Push / Pull: 15.85 lbs./min. (7.19 kg/min.)R134a Recovery RatesVapor Recovery Rate: 0.46 lbs./min. (0.21 kg/min.)Liquid Recovery Rate: 4.52 lbs./min. (2.05 kg/min.)Liquid Push / Pull: 10.89 lbs./min. (4.94 kg/min.)R22 Recovery RatesVapor Recovery Rate: 0.55 lbs./min. (0.25 kg/min.)Liquid Recovery Rate: 6.35 lbs./min. (2.88 kg/min.)Liquid Push / Pull: 11.40 lbs./min. (5.17 kg/min.)Operating Temperature32˚ to 104˚ F (0˚ to 40˚ C)Power Supply110-120 VAC, 60Hz 10 A; 220-240 VAC, 50/60Hz, 5 A;100 VAC, 50/60Hz, 10 ADimensions16.125“ x 10.25” x 13.75” (410 x 260 x 350mm)Weight28.5 lbs. (12.9 kg)ApprovalsCE, Recovery rates per AHRI 740Warranty12-month on unitGas Analyzers

Bacharach H-10 Pro Refrigerant Leak Detector with Charger (N.American plug only) Catalog# 3015-80043015-8004 H-10 Pro Refrigerant Leak DetectorDetects all CFC, HFC, and HCFC non-flammable refrigerants including R12, R22, R134a, R404a, R410a, R502, R507 and many othersUltra-sensitive detection as low as 0.006 oz/yrDual power sources include rechargeable battery and external DC powered wall adapter (included)Visual sensor calibration system (with included reference leak bottle)Pinpoints small, medium and large leaks quickly and accuratelyHeadphone port allows for optional headset for use in high-noise environmentsH-10 PRO Product SpecificationsGases DetectedAll halogen-based CFC, HFC and HCFC non-flammable refrigerants including: R12, R22,R134a, R404a, R410a, R502, R507 and many othersDetection PrinciplePositive Ion Emission Heated DiodeSensitivity0.006 oz/yr (stationary) | 0.1 oz/yr (moving probe per SAE J2791)Sensor Life1 year (typical)*Warm-Up TimeApproximately 2 minutesResponse Time1 secondOperating Temperature32°F to 104°F (0°C to 40°C)Flow Rate90 cc/min (typical)‡Auto Background AdjustYes, automatic mode onlyLeak IndicatorsVisible LED at probe tip and audible buzzer (with or without optional headphones)Dimensions10.5”l x 8.3”w x 5.4” h (26.7 cm x 21.1 cm x 13.7 cm)Weight5.1 lb. (2.3 kg)Probe LengthFlexible 4.5 ft. (1.37 m) with built-in filterPower12 VDC - internal rechargeable sealed lead acid battery; 100-240 VAC wall adapter/universalbattery charger to charge or run continuouslyBattery Life3 hours (typical)ApprovalsCE MarkWarranty3 years (does not cover sensors, filters, reference leaks, airflow balls, lamps, batteries or probe tips)Detektor Gas

Bacharach 0028-8000 Tru Pointe Ultra Leak Detector Kit w/ Folding HeadsetTru Pointe UltraUltrasonic leak detectorDetects leaks of any gas typeWorks up to 30 feet away from leakCan be used for TXV's and steam trapsBacharach's Tru Pointe Ultra is a compact ultrasonic leak detector that uses patented technology to detect leaks in air conditioning and refrigeration systems. The Tru Pointe Ultra is the world's first pocket-size electronic instrument that can simultaneously detect the vacuum and high pressure leaks that occur in HVAC/R systems. The Tru Pointe Ultra guides the user to a leak by quantifying the intensity of the ultrasound and converting it to a sound the user can hear easily through headphones.Tru Pointe Ultra's operational principle is based on the detection of inaudible high frequency sounds produced by the flow of gases and liquids in leaks. The leak flow, passing through very narrow spaces (cracks, holes etc.), generates a rich ultrasonic sound spectrum which is easy to detect with the Tru Pointe Ultra leak detector.Since the Tru Pointe Ultra detects airborne ultrasound and is not a particular to gas chemistry it can detect all types of gases including nitrogen and refrigerants rushing in a system under vacuum. An electronic conversion process called heterodyning translates this ultrasound into true audible sound that helps the user distinguish leaks through headphones.The Tru Pointe Ultra is capable of finding pressure and vacuum leaks in HVAC systems, without being affected by the wind or background refrigerants in confined spaces. It can find a leak as small as 2.5-3oz./yr (84gr/yr).Available with compact, folding headset (Tru Pointe Ultra) or high quality stereo headphones (Tru Pointe Ultra HD), the Tru Pointe Ultra is an indispensable tool that saves time and money for every HVAC/R technician and contractor.All kits include:InstrumentProbe wrenchTouch probe6 in. wave guide9V batteryUser manualHard carrying case0028-8000Tru Pointe Ultra Leak Detector Kit w/folding headset0028-8010Tru Pointe Ultra Leak Detector Kit w/folding headset & SoundBlaster0028-8001Tru Pointe Ultra HD Leak Detector Kit w/stereo headphones0028-8011Tru Pointe Ultra HD Leak Detector Kit w/stereo headphones & SoundBlaster Manufacturer SpecsSpecificationsGases DetectedAll gases, including compressed air, nitrogen, steam, etc.SensitivityContinually variable slide adjustmentResponse TimeInstantaneousLeak IndicatorsVisual (red LED scale), audibleAutomatic Background AdjustmentNo (manual adjustment)Power9V batteryRun Time80 to 120 hoursSize (H x W x D)5.5 x 2.4 x 0.9 in. (14 x 6.1 x 2.2 cm)Weight0.3 lb. (138 g) including batteryOperating Conditions32 to 122 °F (0 to 50 °C), 10 to 90% RH (non-condensing), 1 ATMWarm-up TimeInstantaneousApprovalsCE markWarranty1 year Detektor Gas

Bacharach 3015-5043 - HGM-MZ Four Zone Monitor (CFC, HCFC and HFC)Four zone refrigerant monitorFor use with CFC, HCFC and HFC refrigerantsIndustry-leading 1 ppm Minimum Detectable Level (MDL)Proprietary infrared (NDIR) sensor accurately detects 60+ different refrigerantsIdentify leaks early to mitigate refrigerant loss, protect produce, enhance energy efficiencyIndustry-leading sampling times / distances with high performance pump (up to 1,200 ft / 365 m)No calibration required, minimal maintenanceA variety of communication interfaces are available - Modbus, BACnet, and moreSpecificationsProduct AttributesSensorProprietary non-dispersive infrared (NDIR) technologyDimensions12.23" x 13.7" x 4.96" (21.0642 cm x 34.7980 cm x 12.5984 cm)Weight15 lbs (6.8 kg)User InterfaceFront panel with 3 indicator lights: Green - power on, normal; Yellow - fault; Yellow Flashing - system fault; Red Flashing - point has exceeded alarm setCommunicationsFull 2-way communication with MZ-RD display module or building management system via RS-485 Serial Interface. RS-232C Comm. Port Standard00AlarmsFour SPDT alarm contacts are provided rated 2A at 250 VAC (inductive), 5A at 250 VAC (resistive). Three assigned to ppm level alarms, one assigned to system faultsConditioned SignalOptional dual 4-20 mA DC isolated outputs. Channel 1 = zone area, Channel 2 = ppmSystem NoiseLess than 40dB at 10 ft (3m)Response Time5 to 315 seconds per zone - depending on air line length and number of zonesSampling ModeAutomatic or manual (hold)Monitoring Distance1,200 ft max (500 ft for NH3) for combined length of sample and exhaust tubing (each zone)Power Safety ModeFully automatic system reset. All programmed parameters retainedOperating Temperature32° to 122° F (0 to 50° C)Ambient Humidity5% to 90% RH non-condensingAltitude Limit6,562 ft (2,000 m)Power100 to 240 VAC, 50/60 Hz, 20 WApprovalsUL 61010-1, CAN/CA 22.2 No. 61010-1; EN61010-1, EN61326, EN14624; CE MarkMeasurementGas LibraryHGM-MZ: FA188, FC72, H1211, H1233ZD, H1234YF, H1234ZE, H1301, H2402, HFP, N1230, N4710, N7100, N7200, N7300, N7600, R-11, R-113, R-114, R-12, R-123, R-124, R-125, R-134a, R-21, R-22, R-227, R-23, R-236fa, R-245fa, R-32, R-401A, R-402A, R-402B, R-404A, R-407A, R-407C, R-407F, R-408A, R-409A, R-410A, R-422A, R-422D, R-424A, R-426A, R-427A, R-438A, R-448A, R-449A, R-452A, R-452B, R-500, R-502, R-503, R-507, R-508B, R-513A, R-514AMeasuring RangeHGM-MZ: All gases 0 to 10,000 ppmAccuracyHGM-MZ: 1 ppm Minimum Detectable Level (MDL) (most gases)±1 ppm ±10% of reading from 0-1,000 ppm (most gases)±1 ppm ±2% of reading with field calibration (most gases)±10 ppm ±15% of reading from 0-1,000 ppm (R-11, R-21, R-32, R-113)Temperature DriftHGM-MZ: ±0.8% (R-134a) of reading per degree C between purge cyclesGas Analyzers

Bacharach 0010-5021 - Fyrite Classic, Measures O2, 0 to 21% and CO2, 0 to 20%Fyrite ClassicPart number 0010-5021Measures O2, 0 to 21% and CO2, 0 to 20%Fast, accurate instrument for measuring O2 and CO2Measure O2 and CO2 simply, accurately and quicklyMultiple ranges available for use in a wide variety of applicationsField replaceable, easy to change fluid for keeping the instrument in the fieldSpecificationsMeasurementsO2: 0 to 7.6, 0 to 21 and 0 to 60%CO2: 0 to 7.6, 0 to 20 and 0 to 60%Maximum Number of Samples (approximate)O2: 100CO2: 300Resolution0 to 7.6% range: 0.2%0 to 20/21% range: 0.5%0 to 60% range: 2%Size (H x W x D)7.4 x 3.1 x 3.1 in. (18.8 x 7.9 x 7.9 cm)Weight1.2 lb. (0.54 kg) unfilledOperating Conditions-30 to 150 °F (-34 to 65 °C)Maximum Gas Temperature850 °F (454 °C)Warranty1 yearGas Analyzers

Bacharach 2410-1112 PCA 400 w/ O2, CO, 12 in. Probe with 7.5 ft. Standard Tubing, Case and PrinterPortable Combustion and Emissions Analyzer4.3 inch color touch screen with enhanced viewing options to easily see readingsBluetooth wireless technology allows for live streaming of data to any phone, PC or tabletRugged all-in-one probe connection for durability and easy setupDilution mode protects sensors and allows for use in harsh conditionsRuns on rechargeable Lithium-Ion battery pack or 4 'AA' batteries5 year oxygen sensor warrantyManufacturer SpecsMeasurementsO2: 0 to 20.9%CO-H2 compensated: 0 to 10,000 ppmCO (high): 0 to 40,000 ppmNO: 0 to 3,000 ppmNO2: 0 to 500 ppmSO2: 0 to 5,000 ppmStack Temperature: -4 to 2192°F (-20 to 1200°C)Ambient Temperature: -4 to 999°F (-20 to 537°C)Draft/Differential Pressure: ± 72 inH2O (± 179 mB)Display4.3 in. (10.9 cm) color touch panel LCDPowerRechargable Li-Ion battery pack, 4x AA batteries or wall adapter (5V USB)Run Time12 to 14 hours (typical, w/ included Li-Ion battery pack)Size (H x W x D)10 x 3.8 x 2.5 in. (25.4 x 9.7 x 6.4 cm)Weight1.5 lb. (0.68 kg) w/ Li-Ion battery packFuels [1]Natural gas, coal, oil 2/4/6, propane, wood/biofuel, kerosene, bagasse, digester gas, B5, pellets, KOKS, LEG, LPG, butane, wood chipsOperating Conditions32 to 113°F (0 to 45°C), 15 to 90% RH (non-condensing), 1 ATM ± 10%Warm-Up Time60 secondsMemory [2]500 sets of recordsCommunicationsUSB 2.0 (micro-B), IrDA, BluetoothApprovalsCEWarranty2 years for instrument, 5 years for O2 sensorSample Flow Rate0.6 to 0.7 L/min (standard)1.0 L/min (high flow mode)Gas Analyzers

Bacharach 0024-8511 - Fyrite InTech Portable Combustion AnalyzerLow cost combustion analyzerEasy to read, high contrast LCD display with backlight and adjustable font sizeDirect measurement of O2, CO (0-2000 ppm), stack, ambient, and combustion air temperaturesCalculated measurement of combustion efficiency, CO2, CO (air-free) and excess airCO shut-off/protect feature prevents exposure to over-range conditions to prolong sensor lifeInternal memory for up to 10 recordsUp to 20 hours of continuous operation using four replaceable "AA" alkaline batteriesSpecificationsDescriptionTemperatureStorage: -20° to 50° C ( -4° to 122° F), 0° to 20° C (32° to 68° F ) optimalOperation: -5° to 45° C (23° to 113° F)Reference: 20° ± 2° C (68° ± 4° F)HumidityStorage: 15 to 90% RH, non-condensingOperation: 15 to 95% RH, non-condensingReference: 45 ± 10% RH, non-condensingPressure1 atmosphere ± 10%Weight16 ounces (454 g) with batteriesDimensions8.0" x 3.6" x 2.3" (20.3 cm x 9.1 cm x 5.8 cm) (H x W x D)Warm-up TimeMinimum = 30 seconds; Maximum = 60 secondsGas Sample Flow Rate300 to 700 cc/minSensorsO2 Electrochemical (P/N: 0024-0788)CO Electrochemical (P/N: 0024-7265)Temp (Stack) K-Type thermocoupleProduct Approvals and Regulatory ComplianceEN50270: (CE Mark) EMC tested in accordance with European Directive 2004/108/EC.EN50379: Standard for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances (Siegert only) Parts 1 and 3.RoHS ComplianceCase ConstructionHigh impact ABS plastic with co-molded rubber.Protective rubber boot with molded-in magnets.DisplayMonochrome with backlightUSB ConnectorMini B (USB 2.0)Memory10 locations for storing test resultsIrDA PortProtocol: IrDA-SIRData Bits: 8Stop Bits: 1Baud Rate: 9600Parity: NonePower Supply OptionsBatteries (4 AA)Type: Disposable Alkaline (Included)Duration: 15 hours min, continuous max drawType: Disposable LithiumDuration: 20 hours, continuous max drawType: RechargeableDuration: 8 hours, continuous max draw MeasurementRangeResolutionAccuracy Response Time (T90)O20 to 20.9 %0.1% O2±0.3% O2 (on flue gas)< 20 secCO0 to 2000 ppm1 ppm±10 ppm (0 to 200)±5% reading (201 to 2000)< 40 secStackTemp-20° to 650° C(-4° to 1202° F)1° C(1° F)±2° C (0°to 124° C)±3° C (125° to 249° C)±4° C (250°to 400° C)< 50 sec CalculationCalculation RangeResolutionVersionNASiegertEfficiency (HHV)0.1 to 100 %0.1%XXETA (LHV)0 to 115%0.1% XExcess Air1 to 250 %1%X Stack Loss0.1 to 100 %0.1 % XLambda1 to 9.550.01 XCO2 (dry basis)0.1 to a fuel-dependent max in %0.1 %XXCO Ref to O20 to 9999 ppm1 ppmXXCO/CO2 Ratio0.0001 to fuel-dependent max0.0001 XGas Analyzers

Bacharach 0024-8512 - Fyrite InTech Portable Combustion AnalyzerLow cost combustion analyzerEasy to read, high contrast LCD display with backlight and adjustable font sizeDirect measurement of O2, CO (0-2000 ppm), stack, ambient, and combustion air temperaturesCalculated measurement of combustion efficiency, CO2, CO (air-free) and excess airCO shut-off/protect feature prevents exposure to over-range conditions to prolong sensor lifeInternal memory for up to 10 recordsUp to 20 hours of continuous operation using four replaceable "AA" alkaline batteriesSpecificationsDescriptionTemperatureStorage: -20° to 50° C ( -4° to 122° F), 0° to 20° C (32° to 68° F ) optimalOperation: -5° to 45° C (23° to 113° F)Reference: 20° ± 2° C (68° ± 4° F)HumidityStorage: 15 to 90% RH, non-condensingOperation: 15 to 95% RH, non-condensingReference: 45 ± 10% RH, non-condensingPressure1 atmosphere ± 10%Weight16 ounces (454 g) with batteriesDimensions8.0" x 3.6" x 2.3" (20.3 cm x 9.1 cm x 5.8 cm) (H x W x D)Warm-up TimeMinimum = 30 seconds; Maximum = 60 secondsGas Sample Flow Rate300 to 700 cc/minSensorsO2 Electrochemical (P/N: 0024-0788)CO Electrochemical (P/N: 0024-7265)Temp (Stack) K-Type thermocoupleProduct Approvals and Regulatory ComplianceEN50270: (CE Mark) EMC tested in accordance with European Directive 2004/108/EC.EN50379: Standard for portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances (Siegert only) Parts 1 and 3.RoHS ComplianceCase ConstructionHigh impact ABS plastic with co-molded rubber.Protective rubber boot with molded-in magnets.DisplayMonochrome with backlightUSB ConnectorMini B (USB 2.0)Memory10 locations for storing test resultsIrDA PortProtocol: IrDA-SIRData Bits: 8Stop Bits: 1Baud Rate: 9600Parity: NonePower Supply OptionsBatteries (4 AA)Type: Disposable Alkaline (Included)Duration: 15 hours min, continuous max drawType: Disposable LithiumDuration: 20 hours, continuous max drawType: RechargeableDuration: 8 hours, continuous max draw MeasurementRangeResolutionAccuracy Response Time (T90)O20 to 20.9 %0.1% O2±0.3% O2 (on flue gas)< 20 secCO0 to 2000 ppm1 ppm±10 ppm (0 to 200)±5% reading (201 to 2000)< 40 secStackTemp-20° to 650° C(-4° to 1202° F)1° C(1° F)±2° C (0°to 124° C)±3° C (125° to 249° C)±4° C (250°to 400° C)< 50 sec CalculationCalculation RangeResolutionVersionNASiegertEfficiency (HHV)0.1 to 100 %0.1%XXETA (LHV)0 to 115%0.1% XExcess Air1 to 250 %1%X Stack Loss0.1 to 100 %0.1 % XLambda1 to 9.550.01 XCO2 (dry basis)0.1 to a fuel-dependent max in %0.1 %XXCO Ref to O20 to 9999 ppm1 ppmXXCO/CO2 Ratio0.0001 to fuel-dependent max0.0001 XGas Analyzers

Bacharach 0019-8038 Informant 2, Dual Gas Contractor KitInformant 2 with refrigerant and combustible gas sensors, rubber boot, instruction manual, 4x AA batteries, 5x refrigerant sensor filters and a hard carrying caseA dual purpose refrigerant and combustible gas leak detectorDetects refrigerants and combustible gases (with respective sensor installed) - changing sensors takes only secondsSensor located in the probe tip for ultimate sensitivity, fast response and easy changingVisual and audible indicators include dual LED scales, flashing LED in probe tip and a speaker (with mute option)SpecificationsRefrigerants DetectedAll CFC, HFC and HCFC refrigerants, including but not limited to: R-12, R-22, R-134a, R-404A, R-410A, R-502, R-507, HFO-1233zd, HFO-1234yf and HFO-1234zeCombustible Gases DetectedAll hydrocarbons/combustible gases, including but not limited to: methane (CH4), propane (C3H8), hydrogen (H2), butane (C4H10) and pentane (C5H12)SensitivityRefrigerants: 0.5 oz/yr (14 g/yr) for R-12 and R-134a per SAE J1627 0.1 oz/yr (3 g/yr) when held at leak source for approx. 5 secondsCombustibles: 50 ppm CH4 (minimum)Response TimeInstantaneousLeak IndicatorsDual LED scales, LED in probe tip and internal speaker (w/mute option)Automatic Background AdjustmentYesPower4x AA batteriesRun Time4-5 hours typical (alkaline batteries)Size (H x W x D)1.75 x 9.62 x 2.25 in. (4.5 x 24.4 x 5.7 cm)Weight0.86 lb. (0.39 kg) including batteriesSensor LifeRefrigerant: 1 year (typical)Combustible: 5 years (typical)Operating Conditions32 to 122 °F (0 to 50 °C), 10 to 90% RH (non-condensing), 1 ATMWarm-up Time10 secondsApprovalsCE markSAE J1627 (refrigerant sensor only)UL 913 Class 1, Division 1, Group D (combustible sensor only)Warranty1 year (including sensors)Detektor Gas