CASELLA

Detil Produk :

Description

APEX2IS PLUS PUMP

SKU = APEX2ISPLUS

APEX2IS STANDARD PUMP

SKU= APEX2IS

APEX2IS PRO PUMP

SKU= APEX2ISPRO

Whatever media you’re using you can be assured that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal sampling pump has outstanding back pressure capability.  There are no more worries about battery life:  The Apex2 personal sampling pump has high performing Li Ion batteries and an intelligent battery life indicator letting you know exactly how much charge you have left.  And with the Apex2 performing with a pulsation value of ~10% you can have true confidence in the integrity of your samples. With its slim, ergonomic design, the pump is less obtrusive to the wearer allowing them to carry on with their job whilst being monitored. A sturdy clip with a lifetime guarantee means it’s secure and the detachable rubber boot guards against knocks. Ingress resistant to IP65 means that you can use it in the harshest environments and its smooth finish means it’s easy to decontaminate.

• Outstanding Performance
• Slim Ergonomic Design
• Simple Operation
• Motion Sensor
• Bluetooth connectivity to check the pump remotely
• Great Long battery life
• All Models Intrinsically Safe
• Duration Timers

Alat Laboratorium Umum

Detil Produk :

Description

• High accuracy calibration
• Pulsation detection
• Simple operation
• Rugged design
• Long battery life
• Flow range 500mL/min to 5L/min
• 70 hour battery life

The Flow Detective™ is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator which removes the need to purchase multiple flowmeters. This minimizes set up prior to undertaking calibrations, and saves on purchasing costs and valuable time to undertake pump calibrations.

Alat Laboratorium Umum

Detil Produk :

CONICAL INHALABLE SAMPLER (CIS)

Alat Laboratorium Umum

Detil Produk :

FLOW DETECTIVE STANDARD KIT And FLOW DETECTIVE PLUS KIT

Description

• High accuracy calibration
• Pulsation detection
• Simple operation
• Rugged design
• Long battery life
• Flow range 500mL/min to 5L/min
• 70 hour battery life
• Includes kit case, tubing and calibration adaptor

The Flow Detective™ is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator which removes the need to purchase multiple flowmeters. This minimizes set up prior to undertaking calibrations, and saves on purchasing costs and valuable time to undertake pump calibrations.

Alat Laboratorium Umum

Detil Produk :

Description

CEL-712 Microdust Pro in briefcase with accessory

• Real-time graphical display of dust levels
• Simple icon driven user interface
• Extensive range: 0.001mg/m3 to 250g/m3
• Sampling for total dust, (respirable, PM2.5 or PM10 with optional adaptor)
• Long battery life
• Unique on site calibration insert
• Data logging with 500 run menory
• Downloads to Insight Software for analysis and reporting

The Microdust Pro is a real-time hand-held, data logging instrument for the detection of airborne dusts, fumes and aerosols. It is ideal for walk-through surveys and for checking the effectiveness of control measures. It is a simple to use instrument which gives the user the additional qualitative data which cannot be gained by gravimetric air sampling methods alone. This extremely versatile instrument can also be used with a range of accessories for static and size selective sampling applications. The screens are colour coded to ease navigation. Real-time instantaneous readings are given on the large display along with average levels. The Microdust Pro logs the data also which means that it can be downloaded later for review.The instrument is factory calibrated using ISO 12103-1 Fine Dust Test and each probe is also supplied with its own unique Calibration Insert which creates a known optical scattering effect in the probe’s sampling chamber. This means that the Microdust Pro can be field calibrated; a unique feature in the marketplace. The Microdust Pro can also be used in conjunction with a personal sampling pump and gravimetric adaptors for size selection: Total Inhalable, Respirable or PM2.5 and PM10. An enclosure is available also for static, longer measurements.

Alat Laboratorium Umum

Detil Produk :

INTEGRATING SOUND LEVEL METER (CLASS 2)

Integrating Sound Level Meter (Class 2)

• Decibel (Db) Low Range (dB)20
• Decibel (Db) High Range (dB)140
• Resolution (dB)0.1
• Accuracy±1.0 dB
• ResponseFast, Slow, Impulse (simultaneously)
• WeightingA, C, Z (simultaneously)
• Meter ClassType 2
• FunctionLp, Lmx, Lmn, Leq, Ldod, Lavg, Lpk, LAE
• ComplianceANSI S1.4: type 2 or type 1; IEC 61672
• OutputUSB
• DisplayFull Color Graphic
• Battery TypeAA Battery (3)
• Height (cm)23, Width (cm)7, Depth (cm)3
• DescriptionType 2 Sound Meter Kit

The CEL-62x Series of Integrating Digital Sound Level meters can be used for the measurement of all workplace noise parameters to comply with workplace noise legislation, e.g. EU, OSHA and ACGIH. Use the CEL-62x Series to carry out occupational noise assessments or machinery noise tests as well as to assist with the selection of hearing protection. Choose a CEL-62x Series model to suit your requirements, either with a Class 1 or Class 2 Microphone for precision, and with or without Octave Band analysis, to aid you in the choice of hearing protection. The CEL-62x is a simple to use meter and data is displayed on the high resolution colour display. Measurement screens are intuitively colour coded according to the mode of operation, i.e. green if a measurement is being taken and red when a run has ended. Data is graphically displayed to give a clearer picture of the noise environment. Calibrate easily on-site with the 120 Series Calibrator to comply with best practice. The instrument also has six selectable setups – four that are pre-defined to legislative standards and two that can be customised so that you get the data you need. Regardless of the setup, the CEL-62x measures and stores ALL parameters, even if not selected and these can be viewed in the software. All runs are date and time stamped and the CEL-62x stores up to 100 runs. Simply connect your CEL-62x to a PC via the USB connection and the data can be easily reviewed without the need for proprietary software. The instrument has a single large measurement range of 20-140dB meaning that you don’t need to change range. On the CEL-620B, Octave band analysis is shown in real-time in both graphical and tabular format with the dominant frequency highlighted. Time history of the broadband noise level is displayed in real-time, so a user can see how the noise level varies with time.

• Noise at work applications
• Simple operation
• Rugged design
• Selection of hearing protection
• Calculation of noise exposure
• Pre-defined and user configurations available

Alat Laboratorium Umum

Detil Produk :

0.1MM TIPPING BUCKET RAIN GAUGE (LIGHT RAINFALL)

0.1mm Tipping Bucket Rain Gauge (light rainfall)

• Bucket sizes: 0.1mm
• Aperture: 400 cm2 
• Accuracy: ±2% at 1 litre/hour 
• Capacity: Unlimited 
• Transducer: Magnet/Reed switch 
• Operating temperature range: 1oC to 85oC 
• Output: Contact closure 
• Weight: 2.6 kg

The Casella TBRG is a reliable and extremely robust transducer, designed as a stand-alone sensor for operation with an existing logging system. The body and funnel are made from aluminium alloy with an accurately machined septum ring at the top giving an aperture of 400cm2. The tipping bucket mechanism is mounted inside the body on a cast aluminium-alloy base, incorporating a built-in spirit level to ease correct positioning. All this ensures the TBRG is quick and easy to deploy, whilst providing reliable operation with the minimum of maintenances.

• Proven TBRG Design
• 400cm2 Aperature
• 0.1mm or Rain Per Tip
• Robust Aluminium Construction

Alat Laboratorium Umum

Detil Produk :

0.2MM TIPPING BUCKET RAIN GAUGE (MODERATE RAINFALL)

0.2mm Tipping Bucket Rain Gauge (moderate rainfall) 

• Bucket sizes: 0.2mm
• Aperture: 400 cm2 
• Accuracy: ±2% at 1 litre/hour 
• Capacity: Unlimited 
• Transducer: Magnet/Reed switch 
• Operating temperature range: 1oC to 85oC 
• Output: Contact closure 
• Weight: 2.6 kg

The Casella TBRG is a reliable and extremely robust transducer, designed as a stand-alone sensor for operation with an existing logging system. The body and funnel are made from aluminium alloy with an accurately machined septum ring at the top giving an aperture of 400cm2. The tipping bucket mechanism is mounted inside the body on a cast aluminium-alloy base, incorporating a built-in spirit level to ease correct positioning. All this ensures the TBRG is quick and easy to deploy, whilst providing reliable operation with the minimum of maintenances.

• Proven TBRG Design
• 400cm2 Aperature
• 0.1mm or Rain Per Tip
• Robust Aluminium Construction

Alat Laboratorium Umum

Detil Produk :

CASELLA HAVEX KIT COMPRISING OF: HAVEX METER, ACCELEROMETER & CABLE, MOUNTING PLATE, CARRY CASE, CASELLA VIB DATA SOFTWARE

Alat Laboratorium Umum

Detil Produk :

GUARDIAN2 PARTICULATE, NOISE, VIBRATION & WINDSPEED, DIRECTION

• Real time dust (PM10, PM2.5 and PM1.0 simultaneously)
• Powered by mains (100-250VAC), solar or battery
• IEC61672-1 Class 1 compliant noise measurements for accurate results measuring several parameters (e.g. LAeq, LAFmax, LN%)
• Heated inlet to reduce moisture effects
• Maintenance free wind speed and direction to correlate dust transmission
• Triaxial ground vibration sensor to measure PPV (mm/s)
• Email and text alerts to nominated recipients when dust, noise or vibration levels are exceeded
• Manual or automatic reports
• Add VOC monitoring capabilities to this Guardian2 using SKU 208170D/VOC

The Guardian2 Site Boundary Monitor is designed to help you remain compliant with site emission levels, using remote monitoring and reporting of noise, dust and vibration levels. Powered by mains, solar or battery, the Guardian2 is ideal for any construction noise monitoring or environmental dust measurement location, no matter how remote. For further details on solar or battery power options see the solar and battery power section below. Simply plug in to the power source and it will begin continuous emission monitoring, its that simple!

The Guardian2 includes Casella’s ‘mHub’ logger with a built in ‘E-sim’ simcard. The E-sim has low data costs and searches several networks to ensure the highest possible signal strength, helping to ensure good data connectivity. Data is available in real time from our secure website http://www.casella247.com/ using a private login. A report can be readily produced for site dust or noise compliance purposes and in addition, the system provides alerts via text message or an email should limits be exceeded. Reports can be easily be automated and sent to multiple users. For example, one user can be receiving a report about pm10 monitoring dust levels, where another user can receive a report about noise levels.

The innovative Guardian2 is optionally equipped with a photoionization detector (PID) to measure for VOCs up to 6,000 ppm (parts per million), assessing the emissions and air quality of a site.

Alat Laboratorium Umum