GAS ANALYZERS

Felix F-900 Portable Ethylene AnalyzerThe F-900 Portable Ethylene Analyzer provides measurements of ethylene in real time. Quality Assurance professionals use the F-900 to collect the data they need to manage ethylene gas accurately and efficiently—in controlled atmosphere facilities, cold storage, and shipping containers. Until recently, sensitive ethylene measurements were available only through complex and expensive gas sampling and gas chromatography analysis. The F-900 is an economical, yet precise, solution to ethylene measurement.   The F-900 Research Kit enables the stand-alone unit to take in-situ measurements of ethylene flux from fruits and leaves non-destructively. By using the Injection Port Kit, users can take small-volume, point-in-time measurements of ethylene. Additional sensors for measuring CO2 and O2 can be added to the F-900 for complete ripening gas analysis. FEATURESHighly sensitive C2H4 sensorswith a lower detection limit of.04 ppm (40 ppb)Performs non-destructive measurementsRapid response timeFunctional across broad temperature and humidity rangeCO2 and O2 sensing capability (optional)Compact and lightweight (2.43 Kg)Real-time, continuous monitoringInternal data logging and storage (4GB SD card)User adjustable sampling rateTerminal block for communication with ventilation or other controlled atmosphere systemsOptional Injection Port Kit for small volume static samplesTransflective display enables easy viewing in varied light conditionsFunctional across a broad temperature and humidity range SPECIFICATIONSMain UnitAir Sampling Rate: 80 ml/minMeasuring Rate: 1 second intervals, open or closed loopDisplay: Sunlight visible transflective LCDOperating Environment: 0°C - 45°C; 0-90% humidity non-condensingBattery Capacity: 5 hours - Rechargeable Li-Ion (5000 mAh)Dimensions: 255mm (L) x 210mm (W) x 138mm (H; includes body with legs)Weight: 2.96 kgEnclosure: Anodized aluminumWarm-up Time: 1 min (C2H4)C2H4 PPB SensorSensor Type: ElectrochemicalRange: 0-10 ppmResolution: 0.001 ppmAccuracy: 5% ± 0.025 ppmLower Detection Limit: 0.025 ppm (25 ppb)C2H4 PPM SensorSensor Type: ElectrochemicalRange: 0-200 ppmResolution: 0.1 ppmAccuracy: 5% ± 0.5 ppmLower Detection Limit: 0.5 ppmCO2 PPM Sensor (optional)Sensor Type: Low-power non-dispersive infrared gas analyzerRange: 0-2000 ppmResolution: 0.1 ppmAccuracy: 5%CO2 PCT Sensor (optional)Sensor Type: Infrared sensor, pyroelectric detectorRange: 0-20%Resolution: 0.01%Accuracy: 5%O2 Sensor (optional)Sensor Type: ElectrochemicalRange: 0-100%Resolution: 0.1%Accuracy: 5%ACCESSORIES - KITSOur Gas Analyzer Kits expand the use of the our gas analyzers to meet virtually every application need. *for use with F-900 onlyDIYAnnual Maintenance KitF-900RK*Research KitF-900IK*Injection Port KitF-900DKDynamic Sampling Kit ACCESSORIES - CHAMBER ATTACHMENTSOur broad range of sample chambers enable our gas analyzers to measure ethylene flux in real-time directly from intact or detached fruits or leaves.F-9002LSample ChamberF-9008LSample ChamberF-900CWSample Chamber Attachment Wand301LC-1Square Leaf Chamber301LC-2Wide Rectangular Leaf Chamber301LC-3Narrow Rectangular Leaf Chamber301LC-4Small Cylindrical Leaf Chamber301LC-5Large Cylindrical Leaf Chamber301LC-71/4 Liter Leaf Chamber301LC-81/2 Liter Leaf Chamber301LC-91 Liter Leaf Chamber301LC-104 Liter Leaf Chamber Gas Analyzers

Felix F-920 Check It! Gas Analyzer Measures CO2 and O2 From 0-100%.The F-920 Check It! Gas Analyzer is a device that rapidly measures CO2 and O2 from 0-100%. Designed for QA personnel to take precise and speedy measurements of CO2 and O2, the Check It! displays results in less than 6 seconds and has a sampling volume of 6.5 mL. The Check It! CO2 / O2 gas analyzer features an intuitive user interface, and lightweight design, which makes it easy for quality control managers to take measurements straight out of the box, and virtually anywhere in the supply chain. A built-in data logger stores thousands of data points and conveniently communicates data through USB or Bluetooth onto a PC or tablet for later analysis.FeaturesMeasures CO2 and O2 from 0-100%Displays results in under 6 secondsPrevious records available for review on deviceHandheld and lightweightInternal data logging and storage (4GB SD card)Battery lasts for 8+ hours Backlit display easily viewed in dimly lit environmentFunctional across broad temperature and humidity rangeBluetooth enabled for rapid data transferSPECIFICATIONSSampling Flow Rate: 70mL/minTotal Sampling Time: 10 secondsData Saving: Automated, 1 second intervalsDisplay: Backlit visible transflective LCDOperating Environment: 0° C - 50° C (0-90 % humidity non-condensing)Operating Atmospheric Pressure: 500-1200mbarDimensions: 18 cm x 13.5 cm x 5.5 cmWeight: 0.95 kgEnclosure: Powder coated aluminumBattery Life: 8.5 hoursPower Source: Removable rechargeable lithium-ion batteryPC Interface: USB and WI-FI SD card + BluetoothData Recorded with Each Measurement: CO2 and O2 concentrations, date, time, RH, GPS location ACCESSORIES - CHAMBER ATTACHMENTSOur broad range of sample chambers enable our gas analyzers to measure ethylene flux in real-time directly from intact or detached fruits or leaves.F-9002LSample ChamberF-9008LSample ChamberF-900CWSample Chamber Attachment Wand301LC-1Square Leaf Chamber301LC-2Wide Rectangular Leaf Chamber301LC-3Narrow Rectangular Leaf Chamber301LC-4Small Cylindrical Leaf Chamber301LC-5Large Cylindrical Leaf Chamber301LC-71/4 Liter Leaf Chamber301LC-81/2 Liter Leaf Chamber301LC-91 Liter Leaf Chamber301LC-104 Liter Leaf ChamberGas Analyzers

FELIX F-940 Store It! Gas AnalyzerThe F-940 Store It! Gas Analyzer provides rapid and precise measurements of ethylene, CO2 and O2. The Store It! was designed for Quality Assurance staff to increase shelf-life and prevent spoilage by monitoring ripening gases throughout the storage process. The Store It! features an intuitive user interface, making it simple to operate right out of the box. Its lightweight, handheld design enables users to rely on the Store It! at all stages of storage along the supply chain. A built-in data logger stores thousands of data points and conveniently communicates data through USB or Bluetooth onto a PC or tablet for later analysis. FEATURESMeasures C2H4, CO2 and O2Displays results in under 30 secondsPast records stored on the deviceHandheld and lightweightInternal data logging and storage (4GB SD card)Bluetooth data transferBattery lasts for 8+ hoursDisplay easily viewed in dimly lit environmentsPolarCept!TM water filter for removing non-ethylene hydrocarbonsSPECIFICATIONSSampling Flow Rate: 70mL/minTotal Sampling Time: 30 secondsData Saving: Automated, 1 second intervalsDisplay: Backlit visible transflective LCDOperating Environment: 0° C - 50° C (0-90 % humidity non-condensing)Operating Atmospheric Pressure: 500-1200mbarDimensions: 18 cm x 13.5 cm x 5.5 cmWeight: 0.95 kgEnclosure: Powder coated aluminumBattery Life: 8.5 hoursPower Source: Removable rechargeable lithium-ion batteryPC Interface: USB and WI-FI SD card + BluetoothData Recorded with Each Measurement: Ethylene, CO2 and O2 concentrations, date, time, RH, GPS locationTrigger Mode Measurements  C2H4 CO2 O2Sensor Type: Electrochemical Infrared Sensor, Pyroelectric detector ElectrochemicalRange: 0-10ppm 0-100% 0-100%Resolution: 0.01ppm 0.01% 0.10%Lower Detection Limit: 0.15ppm 0.50% 0.30%Sampling Volume: 30 ml 12 ml 12 mlResponse Time: 30 seconds 12 seconds 12 secondsAccuracy (absolute): 0.15 ppm 0.50% 0.30%Accuracy (relative): 5% 3% 2%Offset Calibration: Weekly Weekly WeeklySpan Calibration: 3 months 12 months 6 monthsSensor Replaceable (by user): yes no yesLifetime: 2 years 5 years 2 yearsContinuous Mode Measurements  C2H4 CO2 O2Sensor Type: Electrochemical Infrared Sensor, Pyroelectric detector ElectrochemicalRange: 0-10 ppm 0-100% 0-100%Resolution: 0.010 ppm 0.01% 0.10%Lower Detection Limit: 0.030 ppm 0.01% 0.10%Response Time: 70 seconds 6 seconds 12 secondsAccuracy (absolute): 0.030 ppm 0.01% 0.10%Accuracy (relative): 5% 3% 2%Offset Calibration: Weekly Weekly WeeklySpan Calibration: 3 months 12 months 6 monthsSensor Replaceable (by user): yes no yesLifetime: 2 years 5 years 2 years Gas Analyzers

Felix F-960 Ripen It! Gas AnalyzerThe F-960 Ripen It! Gas Analyzer quickly and accurately measures ethylene, CO2, and O2 to assist with decision making throughout the produce ripening process. All three sensors work together to give you a clear picture of gas concentrations in ripening rooms. The Ripen It! is a handheld unit that can easily be transported into ripening rooms or connected to rooms through external ports. Data is conveniently transferred from the device to a network using Bluetooth or the removable SD card.FEATURESMeasures C2H4, CO2 and O2Displays results in under 30 secondsPast records stored on the deviceHandheld and lightweightInternal data logging and storage (4GB SD card)Battery lasts for 8+ hoursDisplay easily viewed in dimly lit environments SPECIFICATIONSSampling Flow Rate: 70mL/minTotal Sampling Time: 90 secondsData Saving: Automated, 1 second intervalsDisplay: Sunlight visible transflective LCDOperating Environment: 0° C - 50° C (0-90 % humidity non-condensing)Operating Atmospheric Pressure: 500-1200mbarDimensions: 18 cm x 13.5 cm x 5.5 cmWeight: 0.95 kgEnclosure: Powder coated aluminumBattery Life: 8.5 hoursPower Source: Removable rechargeable lithium-ion batteryPC Interface: USB and WI-FI SD card + BluetoothData Recorded with Each Measurement: Ethylene, CO2 and O2 concentrations, date, time, RH, GPS locationTrigger Mode Measurements  C2H4 CO2 O2Sensor Type: Electrochemical Infrared Sensor, Pyroelectric detector ElectrochemicalRange: 0-1000 ppm 0-100% 0-100%Resolution: 1 ppm 0.01% 0.10%Lower Detection Limit: 10 ppm 0.50% 0.30%Sampling Volume: 35 ml 12 ml 12 mlResponse Time: 35 seconds 12 seconds 12 secondsAccuracy (absolute): 10 ppm 0.50% 0.30%Accuracy (relative): 5% 2% 3%Offset Calibration: Weekly Weekly WeeklySpan Calibration: 3 months 12 months 6 monthsSensor Replaceable (by user): yes no yesLifetime: 1 year 5 years 2 yearsContinuous Mode Measurements  C2H4 CO2 O2Sensor Type: Electrochemical Infrared Sensor, Pyroelectric detector ElectrochemicalRange: 0-1000 ppm 0-100% 0-100%Resolution: 1 ppm 0.01% 0.10%Lower Detection Limit: 2 ppm 0.01% 0.10%Response Time: 90 seconds 6 seconds 12 secondsAccuracy (absolute): 2 ppm 0.01% 0.10%Accuracy (relative): 5% 3% 2%Offset Calibration: Weekly Weekly WeeklySpan Calibration: 3 months 12 months 6 monthsSensor Replaceable (by user): yes no yesLifetime: 1 year 5 years 2 yearsGas Analyzers

Felix F-950 Three Gas Analyzer Measures Levels of Ethylene CO2 and O2The F-950 Three Gas Analyzer measures levels of Ethylene, CO2 and O2 to maintain optimal produce quality at every phase of the supply chain.The F-950’s versatile design allows it to be be scaled to many environments, from cold storage to transportation container. Simple to operate and weighing less than a kilogram, the F-950 uses an electrochemical cell to measure ethylene between 0-200 ppm. The F-950 is ideal for measuring ethylene production across a wide range of fruit types.FEATURESMeasures C2H4, CO2 and O2Displays results in under 30 secondsPast records stored on the deviceHandheld and lightweightInternal data logging and storage (4GB SD card)Battery lasts for 8+ hoursDisplay easily viewed in dimly lit environmentsPolarCept!TM water filter for removing non-ethylene hydrocarbons SPECIFICATIONSSampling Flow Rate: 70mL/minTotal Sampling Time: 80 secondsData Saving: Automated, 1 second intervalsDisplay: Sunlight visible transflective LCDOperating Environment: 0° C - 50° C (0-90 % humidity non-condensing)Operating Atmospheric Pressure: 500-1200mbarDimensions: 18 cm x 13.5 cm x 5.5 cmWeight: 0.95 kgEnclosure: Powder coated aluminumBattery Life: 8.5 hoursPower Source: Removable rechargeable lithium-ion batteryPC Interface: USB and WI-FI SD card + BluetoothData Recorded with Each Measurement: Ethylene, CO2 and O2 concentrations, date, time, RH, GPS locationTrigger Mode Measurements  C2H4 CO2 O2Sensor Type: Electrochemical Infrared Sensor, Pyroelectric detector ElectrochemicalRange: 0-200ppm 0-100% 0-100%Resolution: 0.1ppm 0.01% 0.10%Lower Detection Limit: 0.15ppm 0.50% 0.30%Sampling Volume: 35 ml 12 ml 12 mlResponse Time: 35 seconds 12 seconds 12 secondsAccuracy (absolute): 0.15 ppm 0.50% 0.30%Accuracy (relative): 5% 3% 2%Offset Calibration: Weekly Weekly WeeklySpan Calibration: 3 months 12 months 6 monthsSensor Replaceable (by user): yes no yesLifetime: 1 year 5 years 2 yearsContinuous Mode Measurements  C2H4 CO2 O2Sensor Type: Electrochemical Infrared Sensor, Pyroelectric detector ElectrochemicalRange: 0-200 ppm 0-100% 0-100%Resolution: 0.1 ppm 0.01% 0.10%Lower Detection Limit: 0.2 ppm 0.01% 0.10%Response Time: 80 seconds 6 seconds 12 secondsAccuracy (absolute): 0.2 ppm 0.01% 0.10%Accuracy (relative): 5% 3% 2%Offset Calibration: Weekly Weekly WeeklySpan Calibration: 3 months 12 months 6 monthsSensor Replaceable (by user): yes no yesLifetime: 1 year 5 years 2 yearsGas Analyzers