GREENLEE

Greenlee 7304 2-1/2" - 4" Conduit Size Standard Round Knockout Punch KitFast, easy and simple to operateCompact design for field use on construction sites and maintenance jobsPunches 10 times faster than wrench methodWill also drive 751 Cable Cutter headCan be used with most standard round Slug-Buster and Slug-Splitter SC punches (not 1/2", 9/16", 5/8")Can be used with non-round punches (adapter may be required)3-foot hosePowerful 11-ton hydraulic ramAlignment Markings improve punching accuracy and productivity when making holesPunches and dies are marked with catalog numbers and sizes for quick part identificationORDERING INFORMATIONWEIGHTCAT NO.UPC NO.DESCRIPTIONLBS.KG764615906Driver with hand pump, draw studs, spacer and plastic case209.1730615909Driver, hand pump, standard punches, dies and draw studs for 1/2" through 2" conduit, and plastic case2410.97306SB34360Driver, hand pump, Slug-Buster punches dies and draw studs for 1/2" through 2" conduit, adapter, spacers, Kwik Stepper Step Bit and plastic case2410.9731015910Driver, hand pump, standard punches, dies and draw studs and spacers for 1/2" through 4" conduit, and steel case5424.57310SB34361Driver, hand pump, Slug-Buster punches, dies and draw studs for 1/2" through 2" and 2-1/2" through 4" standard conduit size punches, dies and draw studs, adapter, spacers, Kwik Stepper Step Bit and steel case5454.57646Pg27433Metric - Driver, hand pump, standard Pg punches, dies and draw studs and spacers for 15.2 mm through 60.0 mm, and plastic case2410.97646PgSB32799Metric - Driver, Slug-Buster Pg punches, dies and draw studs for 15.2 mm through 60.00 mm, adapter, spacers, Kwik Stepper Step Bit and plastic case2410.9730402815Standard punch and die kit (no draw studs) for 2-1/2" through 4" conduit, and plastic case219.53845638456Driver, hand pump, standard punches, dies and draw studs and spacers for 1/2" through 3" and 4" conduit, and steel case.48.4223852038520Driver, hand pump, Slug-Buster punches and draw studs for 1/2" through 3" and 4" conduit, adapter, spacers, Kwik Stepper Step Bit and steel case4821.8In The Box1429AV UPC 04175 2-1/2' Conduit Size Punch1430AV UPC 04177 2-12" Conduit Size Die1431AV UPC 04180 3" Conduit Size Punch1432AV UPC 04183 3" Conduit Size Die2982AV UPC 04978 3-1/2" Conduit Size Punch2981AV UPC 04652 3-1/2" Conduit Size Die2984AV UPC 04655 4" Conduit Size Punch2983AV UPC 04654 4" Conduit Size Die30236 UPC 30236 Plastic Case SpecificationSpecificationsMaximum Capacity10 GA Mild SteelApplicationFor 2-1/2 IN Through 4.000 IN ConduitTypeKnockout, Standard RoundWeight21.000 LB (9.500 KG)Pengukur Elektronik Lainnya

Greenlee 1731H767 Hydraulic Punch Driver with 767 Hydraulic Hand PumpGreat for punching junction boxes and small enclosuresPunch can be used with ram inside or outside of the junction boxFor use with 1/2 IN- 1 IN (22.5 mm - 34.6 mm) conduit size and accessory sizes onlyAlignment Markings improve punching accuracy and productivity when making holesPunches and dies are marked with catalog numbers and sizes for quick part identificationWith 767 Hydraulic Hand PumpCAT. NO.UPC NO.DESCRIPTIONINMMPG1731/159111731H767/204861732/27361  C-Frame with Ram   ✓✓✓1326613266Punch Adapter - 3/8" Ø x 1/2" (9.5 mm)     ✓1326713267Punch Adapter - 3/4" Ø x 1" (19.0 mm)     ✓1327613276Punch Adapter - 3/8" Ø x 1/2" (9.5 mm)   ✓✓ 1327713277Punch Adapter - 3/4" Ø x 1" (19.0 mm)   ✓✓ 1326813268Punch Adapter - 1-1/8" Ø (28.6 mm)     ✓121AV040061/2" Conduit Size Punch1/21622.5✓✓ 123AV040083/4" Conduit Size Die3/42128.3✓✓ 125AV040101" Conduit Size Punch1-34.6✓✓ 1208712087C-Frame 1/2" Conduit Size Die1/21622.5✓✓ 1208612086C-Frame 3/4" Conduit Size Die3/42128.3✓✓ 1208512085C-Frame 1" Conduit Size Die1-34.6✓✓ 172517251725 Hydraulic Foot Pump      1663416634Steel Case   ✓✓ 3831638316High Pressure Hose Unit - 1/4" x 3'(includes 1 each of the following 3 items)      54169541691/4' Male Coupler      5417054170Dust Cap      0630206302High Pressure Hose 1/4" x 3'      1179711797Die Adapter - 3/8" Ø (9.5 mm)     ✓1179011790Die Adapter - 3/4" Ø (19.0 mm)     ✓1178911789Die Adapter - 1-1/8" Ø (28.6 mm)     ✓767767Hydraulic Hand Pump    ✓ 755755Hydraulic Hand Pump      3772937729Hydraulic Hose - 1/4" x 10' (3 m)      1128911289Hydraulic Hose - 3/8" x 6' (9.5 mm x 1.8)      2733527335Metal Case     ✓5064250642Nut - 3/4" - 10 (19.0 mm)     ✓1207912079Frame      1563115631RAM      3761437614Quick Disconnect      1190311903C-Frame      1381413814Packing Kit      In The BoxC-Frame with Ram(13276) Punch Adapter - 3/8 IN Diameter X 1/2 IN (9.5 mm)(13277) Punch Adapter - 3/4 IN Diameter x 1IN (19.0 mm)(121AV) 1/2 IN Conduit Size Punch(123AV) 3/4 IN Conduit Size Punch(125AV) 1 IN Conduit Size Punch(12087) C-Frame 1/2 Conduit Size Die(767) Hydraulic Hand PumpManufacturer SpecificationSpecificationsApplicationFor Fast, One-Shot Punching, No Predrilling Of Pilot HolesMaterialMild SteelMaximum Capacity10 GASize8.000 IN DepthTypeC Frame, PortableWeight36.000 LB (17.000 KG) Multimeter

Greenlee CLM-1000 Cable Length MeterLarge, 20,000 count LCD with backlightKelvin-type alligator clips with solid copper contacts assure low-resistance connection to the  cable being measuredAutomatic temperature compensation for maximum accuracy and convenienceAutomatic power off to maximize battery life20 pre-set cable sizes plus 8 user-programmable settingsPre-programmed switch positionsAWG (7 strands) – 2, 4, 6, 8, 10, 12, 14, 16, 18Aught (19 strands) – 1/0, 2/0, 3/0, 4/0kcmil (37 strands) – 250, 350, 400, 500kcmil (61 strands) – 600, 750, 1000Powered by (6) 1.5V AA batteriesThe Greenlee CLM-1000 Cable Length Meter for AWG-kcmil Wire and Cable is an accurate and convenient way to measure wire length and resistance without having to remove it from a spool. Greenlee CLM-1000 is designed with 20 pre-programmed wire sizes, 8 user programmable sizes, and is designed to measure insulated copper and aluminum conductors.Greenlee CLM-1000 and CLM-1000E Cable Length Meters are hand-held testing devices with the follow- ing measurement capabilities: resistance, temperature, and length. They can be used as #31;#30; meters to measure precise bonding resistances. The primary function of these meters is to calculate the length of cable based upon its material, temperature, and cable gauge. Cable material type can be either uncoated copper or aluminum. There are 20 pre-programmed and eight programmable cable gauges. (There are no strands per cable specification for the eight programmable switch positions.)The pre-programmed switch positions for the CLM-1000 are:AWG (7 strands) – 2, 4, 6, 8, 10, 12, 14, 16, 18Aught (19 strands) – 1/0, 2/0, 3/0, 4/0kcmil (37 strands) – 250, 350, 400, 500kcmil (61 strands) – 600, 750, 1000Multimeter

Greenlee CM-1360 Clamp Meter, AC True RMSMeasures AC currentAC voltage measurement with digital low pass filter for accurate readings on variable frequency drivesAlso measures DC voltage, resistance, capacitance and frequencyTests continuity and diodesFlashlight inside clamp jaw for easier work in dark locationsBacklight & relative mode for added versatilityAmpTip™ increases accuracy on small wires and low currentTwo voltage detection modes - non-contact or using a single test leadData holdRecording of Maximum, Minimum and Average readingsLifetime Limited Warranty FEATURESCM-660CM-860CM-960CM-1360CM-1560True RMSACACAC+DCACAC+DCPeak RMS  ✓ ✓Crest    ✓Jaw Flashlight   ✓✓Backlight ✓✓✓✓Relative Offset Mode (Δ) ✓✓✓✓AmpTip™✓✓✓✓✓VFD ACV, Hz Measurements✓✓✓✓✓Non-Contact Voltage Detection✓✓✓✓✓Maximum / Minimum / Average✓✓✓✓✓Frequency✓✓✓✓✓Continuity / Diode Tests✓✓✓✓✓Data Hold✓✓✓✓✓Automatic Power Off (APO)✓✓✓✓✓RANGESCapacitance 2500 µF2500 µF2500 µF2500 µFDC Amps  600 1000AC Amps60060060010001000DC Volts60060060010001000AC Volts60060060010001000Resistance60 kΩ60 kΩ60 kΩ60 kΩ60 kΩDisplay Counts60006000600060006000Measurement Category RatingCAT IV 300VCAT III 600VCAT IV 300VCAT III 600VCAT IV 300VCAT III 600VCAT IV 300VCAT III 1000VCAT IV 300VCAT III 1000VClamp Meter

Greenlee CMGRT-100 Clamp-On Ground Resistance TesterMeasures currents down to 1mA.Convenient alarm and 99-point memory functions.Reads ground resistance down to 0.10Ω.Fully autoranging with data hold to capture readings./li>Measures up to 30A RMS ground or leakage current.Accessories included: (1) 9V battery, molded carrying case, test resistance loop.The Greenlee CMGRT-100 Clamp-On Ground Resistance Tester is a hand-held testing device intended to evaluate grounding systems. It has two modes:Active Mode for measuring resistancePassive Mode for measuring currentThe Active Mode induces a voltage into a conductor and measures the resulting current. It then calculates the resistance. The Passive Mode senses the electromagnetic field surrounding a conductor to determine the current flow.A test resistance loop is provided to perform a quick check of the unit.IdentificationJawLeverMemory ButtonAlarm ButtonCurrent and Decrement ButtonResistance and Increment ButtonOn/Off ButtonDisplayHold ButtonTest Resistance Loop General SpecificationsDisplay3-3/4 Digit LCD, 2999 CountGround/Leakage Current Measurement:299mA2.999A, 29.99AGround Resistance Measurement:0.100 - 1200ΩJaw Opening:1.250 INMeasurement Category:CAT III, 150 VStandard:CAT III, C/US UL Listed, CE, CMultimeter

Greenlee DM-830A Digital Multimeter - TRMS, AC/DC, Dual TempTrue RMS for no-compromise accuracyMeasures voltage, current, resistance, capacitance and frequencyTests continuity and diodesBacklit LCD With Dual 10,000 Count DisplaysBeepJack warns when test leads are incorrectly inserted in current measurement terminalsAutomatic and manual range selectionRelative offset mode to see changes in measurementsData holdUse optional USB interface DMSC-9U for direct-to-PC loggingLifetime Limited WarrantyAC+DC True RMS gives accurate readings on complex waveformsLow impedance AutoCheck mode - automatically selects AC or DC volts, resistance or continuity. Low impedance masks ghost voltage pickupdBm function with 20 selectable reference impedance valuesCrest capture (peak hold)plus recording of max, min, max-min and average 800A Series and Data-Logging Multimeter   DM-810A features:True RMS for no-compromise accuracyMeasures voltage, current, resistance, capacitance and frequency • Tests continuity and diodesBacklit LCD with dual 10,000 count displaysBeepJack ™ warns when test leads are incorrectly inserted in current measurement terminalsAutomatic and manual range selectionRelative offset mode to see changes in measurementsData holdUse optional USB interface DMSC-9U for direct-to-PC loggingLifetime Limited Warranty DM-820A also features:Crest capture (peak hold) plus recording of max, min, max-min and averageTwo voltage detection modes – non-contact or using a single test leadOne temperature measurement using a type K thermocoupleConductance measurement DM-830A has all DM-810A features plus:AC+DC True RMS gives accurate readings on complex waveformsLow impedance AutoCheck ™ mode – automatically selects AC or DC volts, resistance or continuity. Low impedance masks “ghost” voltage pickupdBm function with 20 selectable reference impedance valuesCrest capture (peak hold) plus recording of max, min, max-min and averageTwo voltage detection modes – non-contact or using a single test leadTwo temperature measurements using type K thermocouplesConductance measurementThe most robust hand-held devices on the market for CAT IV 1000V.Greenlee 800A series multimeters are packed with functions you can rely on to get the job done, such as AutoCHECKTM, NCV EF-Detection, Ghost-Voltage Elimination, audible and visible alerts and a high- resolution display. With standard features like these, you can be sure there is a Greenlee multimeter that meets the needs of any job. Use the chart below to select the model that meets the needs of your jobs. Greenlee DM-830A SpecificationAmperage Measurement600, 6000µA; 60, 600mA; 6, 10ABattery(1) 9 VCapacitance60, 600nF; 6, 60, 600µF; 6, 25 mFConductance99.99 nSDisplayBacklit LCD With Dual 10,000 CountFrequency Measurement15Hz- 50kHz Sine Wave, 5Hz - 1MHz Logic Level Square WaveIncludes(1) 9V Battery, Bead Temperature Probe (DM-820A, DM-830A Only, 400 DEG F/204 DEG C Max), Test Leads, Protective Boot, Carrying CaseMeasurement CategoryCAT IV, 1000 VReplacement PartTC-20 Carrying Case, TSG-3 Sure-Grip Test Leads, TPB Bead Temperature Probe (Included With DM-830A)Resistance Measurement600O; 6, 60, 600 kO; 6, 60 MOStandardCAT IV, C/UL US Listed, TRUE RMS, CE ListedMultimeter

Greenlee DM-510A Professional Plant Digital MultimeterMeasures voltage, current, resistance and frequencyTests continuity and diodesBacklit LCD with 6,000 count displayTwo voltage detection modes - non-contact or using a single test leadBeepJack warns when test leads are incorrectly inserted in current measurement terminalsAutomatic and manual range selectionRelative offset mode to see changes in measurementsData holdUse optional USB / RS-232 interface DMSC-2U for direct-to-PC loggingLifetime Limited WarrantyAccessories included: (2)1.5V AAA batteries, bead temperature probe (DM-210A, DM-510A only, 400°F/204°C max), test leads, protective bootTrue RMS for no-compromise accuracyCrest capture (peak hold) plus recording of max, min, max-min and averageLow impedance AutoCheck mode - automatically selects AC or DC volts,SpecificationsVoltage Measurement60.00, 600.0 mV; 6.000, 60.00, 600.0, 1000VAmperage Measurement600.0, 6000μA; 60.00, 600.0mA; 6.000, 8.00AResistance600.0Ω; 6.000, 60.00, 600.0 kΩ; 6.000, 60.00 MΩCapacitance60.00, 600.0nF; 6.000, 60.00, 600.0, 3000μFFrequency10Hz-50kHz sine wave; 5Hz-999.9kHz logic level square waveTemperatureK type, -58 to 1832 °F (-50 to 1000 °C)Measurement CategoryCAT IV 300V; CAT III 600V; CAT II 1000VMultimeter

Greenlee TR-12A Non-Contact Voltage DetectorThe Greenlee TR-12A Voltage Detector is intended to check for the presence of AC voltage, signaling the user with an intermittent tone and flashing LED. The tone can be disabled using the Smart ON/OFF button. The TR-12A has a Self Test feature that continuously tests the integrity of the entire unit including the antenna. The TR-12A also features low battery indication and an auto power off feature.Detects voltage in tamper-resistant and conventional 15A and 20A, 120V outletsPatented automatic self-test verifies the integrity of the unitBright LEDs flash and audible alarm sounds if voltage is presentDetects voltage in tamper-resistant and conventional 15Aand 20A, 120V outletsPatented automatic self-test verifies the integrity of the unitBright LEDs flash and audible alarm sounds if voltage is presentSilent-mode feature for use in quiet settingsSafe, non-contact voltage detectionUse to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and cables or to find a break in a wireAutomatically turns off after five minutes of non-use to conserve battery lifeLow battery indicatorDesigned and assembled in USA(2) 1.5V AAA batteries includedLifetime WarrantyModel: TR-12A SpecificationsApplicationUse to Detect AC Voltage In Tamper-Resistant And Conventional 15A and 20A, 120V Receptacles, Lighting Fixtures, Circuit Breakers And Cables, Or To Find A Break In A WireBattery(2) 1.5V AAAFrequency50 - 500 HZMeasurement CategoryCAT IV, 1000 VStandardC/US ETL Listed, CE CompliantTypeSelf-Testing Non-ContactVoltage Rating50 - 1000 VACMultimeter

Greenlee GT-16, Adjustable Non-Contact Voltage DetectorGT-16 Adjustable Voltage DetectorAdjustable to safely detect power and low voltageSafely detects AC voltage without touching the bare conductorAdjustable for use on power wiring plus lighting, thermostats and other low voltage circuitsUse to detect voltage in outlets, lighting fixtures, wires and cablesFinds breaks in wiresIdentifies hot and neutral conductorsLow battery indicationThe Greenlee GT-16 Voltage Detector is intended to check for the presence of AC voltage, signaling the user with an intermittent tone and a flashing LED. The LED flashes periodically to confirm battery condition.  Model: GT-16 SpecificationsApplicationUse To Detect Voltage In Outlets, Lighting Fixtures, Wires And CablesBattery(1) 1.5 V AAAFrequency50 - 500HzMeasurement CategoryCAT IV, 1000VStandardC/US UL Listed, CE ListedTypeAdjustable, Non ContactVoltage RatingAC V 5 - 1000Voltmeter

Greenlee TG-2000 Dual Laser Infrared ThermometerTG-2000 Thermometer, InfraredSafe, non-contact temperature measurement.Laser spot indicator shows approximate center of target measurement area.Display temperatures in either Fahrenheit or Celsius.Adjustable emissivity for optimum temperature reading accuracy on a wide range of materials and surfaces.Min, Max, Difference and Average temperature functions.Backlight display for easy readings in any environment.Auto power off for longer battery lifeThis temperature instrument includes the following features:Dual laser sighting. The two lasers indicate the approximate diameter of the measurement area.User-adjustable high and low temperature alarms.Automatic recording of maximum, minimum, difference, and average temperatures while making measurements.Probe jack. Allows the thermometer to measure contact temperature using any K-type thermocouple with a standard mini connector.Lock mode. Allows long-term measurements without holding the trigger. The lasers are turned off in Lock mode unless the trigger is held down. Greenlee TG-2000 SpecificationRange - F-76 ~ 1157Range - C-60 ~ 625DS Ratio : 16:1Laser ClassificationYesK-Type ContactYesEmissivity0.10 ~ 1.00BacklightYesForm FactorGunMaximum Temperature FunctionsYesMinimum Temperature FunctionsYesDifference Temperature FunctionsYesAverage Temperature FunctionsYesAlarmsHi/LowTermometer Digital