GWINSTEK

Features* Frequency Range: 150kHz ~1GHz * Fully Digital Phase Locked Loop Technique Design * High Frequency Stability:±10ppm * RBW : 3K, 30k, 220k, 4MHz * High Input Protection Level : +30dBm,±25VDC * Reference Level Range : -30dBm~ +20dBm * Two Markers for Absolute and Relative Measurement * Support standard RS-232C Interface to connect with PC* Options: Tracking Generator, Power Meter, Remote Control Software1GHz Spectrum Analyzer The GSP-810 Spectrum Analyzer is a digitally synthesized, easy-to-use RF measurement instrument with a frequency range up to 1GHz. It uses a state-of-art design with a phased-locked RF system that combines measurement quality and performance with an affordable price. The GSP-810 is also designed for rugged use with 1-watt input protection. With a compact size and feature packed functions, the GSP-810 is an affordable, expandable, and high quality instrument for the most demanding needs. FREQUENCYFrequency Range150kHz~1GHzAging Rate± 10ppm, 0~50°C, 2ppm/yrSpan Range  Zero, 2kHz~100MHz/div in 1-2-5 sequencePhase Noise-77dBc/Hz @ 1GHz 30kHz offsetFrequency Resolution1kHz C.F. entry, 40Hz sweep resolution at 2kHz/divFrequency Display6 1/2 digit settingFrequency Control Digital phase lockedRESOLUTION BANDWIDTHRBW Range  3kHz, 30kHz, 220kHz, 4MHzRBW Accuracy  15%Video Bandwidth Range  1.6kHz/90kHz couple with RBWAMPLITUDEMeasurement Range-100dBm~+20dBmOverload Protection+30dBm continuous, ± 25VDCReference Level Range-30dBm~+20dBmAmplitude Display Range75dBAmplitude Accuracy±1.5dB typical @ 0dBm, 80MHzFrequency Flatness±1.5dB over 100MHz,±2.5dB typical over entire band/±3dB:150kHz~10MHzAmplitude Level Linearity ± 1.5dB over 70dBDYNAMIC RANGEAverage Noise Floor-95dBm @30kHz RBW, -100dBm typical /-75dBm: 150kHz~10MHzThird Inter-Modulation<-70dBc, @-40dBm input, 2tones, 2MHz apart/ <-45dBc:150kHz~10MHzHarmonic Distortion<-40dBc, RF input < selected referenceNon-Harmonic Spurious<-60dBc typical down from reference level, average, 5MHz/divDISPLAY SYSTEMDisplay DeviceCRT Display, 8 x 10 graticule, 6-inch waveform screen LCD Display, 4 line x 20 character data screenDisplay Function  Center Frequency Control, Bandwidth, Reference Level, Span Range, AmplitudeFUNCTIONSMarker Mode  Absolute, relative, PK->marker, marker->centerNumber of Markers 2Marker Resolution0.1dB, 1kHzMarker Accuracy0.1dB±amplitude accuracyMemory10 save/recall memoryTraceMax. hold, average(2~32 traces), freeze(Hold)Setup Access parametersDemodulator WB FM, 120kHz deviation MB FM, 75kHz deviation NB FM, 30kHz deviation AM Outputs : Internal speaker, 3.5mm stereo jack, wired for mono operationCalibrate Signal80MHz, -30dBmInterface  RS-232C standard & remote display software (The software will be downloaded from GW Web-Site.)POWER SOURCE AC  100V/120V/220V/230V ±10%, 50/60HzACCESSORIES User manual x 1, Power cord x 1DIMENSIONS & WEIGHT  310(W) x 150(H) x 455(D) mmApprox. 8.5kg Alat Laboratorium Umum

Features* Low Noise Floor(-117dBm@1GHz, 3k RBW)* Sequence Programming Functions * ACPR, OCBW, Channel Power, N-dB and Phase Jitter Measurements * 10 Markers with Delta Marker, Peak Functions * AC/DC/Battery(Option)three modes of power supply* USB/RS-232C/GPIB(Option) Interface * 6.4" TFT Color LCD, Resolution: 640x480 * Optional Tracking Generator * Optional Preamplifier3GHz Spectrum AnalyzerFeaturing high performance, uncompromised design, and remote monitoring software, the GSP-830 3GHz Spectrum Analyzer is the latest evolution from GWInstek. The GSP-830 is one of the most advanced Spectrum Analyzer GWInstek has produced to date. The GSP-830 has an exceptional noise floor of -152dBm/Hz; combined with the optional GAP-802 preamplifier, the noise floor can reach a remarkable -172dBm/Hz. With a low noise floor, the GSP-830 is more than capable of finding limits; Trace Detection, combined with an easy-to-use interface, makes the GSP-830 an ideal solution for spectrum analysis. Using the Auto Sequence mode, advanced users can define their own macros in 10 Sequence sets. Repeat or Single run mode can be used to streamline repetitive tasks. PC connection is effortless and versatile supporting USB host/device, RS232C, VGA and GPIB (optional) for remote monitoring, control and analysis.FREQUENCYFrequency Range9kHz ~ 3GHzAging Rate± 10ppm, 0~50°C, 5ppm/yrSpan Range2kHz ~ 3GHz in 1-2-5 sequence, full span, zero spanPhase Noise-80dBc/Hz @1GHz 20kHz offset typicalSweep Time Range50ms ~ 25.6sRESOLUTION BANDWIDTHRBW Range3kHz, 30kHz, 300kHz, 4MHzRBW Accuracy15%Video Bandwidth Range10Hz ~ 1MHz in 1-3 stepsAMPLITUDEMeasurement Range-103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm -117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm -114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm (Span = 50kHz, RBW = 3kHz)Overload ProtectionMax. +30dBm, ±25VDCReference Level Range-110dBm ~ +20dBmAccuracy±1dB @100MHzFrequency Flatness±1dBDisplay Range Linearity±1dB over 70dBDYNAMIC RANGEAverage Noise Floor<-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm <-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm <-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBmThird Inter-Modulation<-70dBc RF Input @-40dBm, Ref.Level @-30dBmHarmonic Distortion<-60dBc RF Input <-40dBm Typical, Ref.Level @-30dBmNon-Harmonic Spurious<-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm<-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm <-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm (Span = 50kHz, RBW = 3kHz)GENERALDisplay640 x 480 high resolution TFT color LCDSplit WindowsActive Window: Upper, Lower or Alternate (two simultaneously sweeping windows)Markers10 Markers for peaks: 5 normal-delta marker pairsFunctions: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak SortTrace Detection3 traces with Peak, Maximum hold, Freeze, Average, Trace mathPower MeasurementACPR, OCBW, Channel Power, N dB and Phase JitterAutoset FunctionAuto tuning the measurement result for observationTriggerConditions: Video, External (Positive-going, +5V TTL external signal) Mode: Normal, Single, Continuous SequenceAutomated test by user-defined macros without any remote controller, 10 Sequential macro set and 10 macros per each set, Variable delays and wait-to-go facilitate automated measurement, Do-sequence links and nests different sequence sets.CONNECTORSRF Input N female, 50Ω nominalRF input VSWR: <2:1, @0dBm Reference LevelExternal ReferenceType: BNC femaleClock Input1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHzReference Clock OutputType: BNC female, 10MHzDC Input (DC Power Operation)Jack : 5.5mm, 12VDC Output (for GAP-801)Type: SMB Male, outputs +9V/100mA Max.INTERFACERS-232CSub-D 9 pins femaleUSB ConnectorUSB Host/Device full speed supportedVGA OutputFront panel: Type A receptacle for USB flash devicesOption: GPIB InterfaceFully programmable with IEEE 488.2 compliancePOWER SOURCE  AC 100 ~ 240V, 50/60HzACCESSORIES User Manual x 1Power Cord x 1USB Cable (Type A plug to Type mini-B plug) x1DIMENSIONS & WEIGHT 330(W) x 170(H) x 340(D) mmApprox. 6kgAlat Laboratorium Umum

Features* Built-In 1 MHz Function Generator* 20MHz Bandwidth, Dual Channel* High Sensitivity 1mV/div* ALT Triggering Function* TV Synchronization* CH1 Output* Z-Axis InputThe GOS-620FG is a general purpose analog oscilloscope with 20MHz bandwidth. Aside from the basic functions such as 1mV/div~5V vertical sensitivity, 0.2uS/div~0.5S/div horizontal sweep time, and practical Auto/Norm/TV-V/TV-H trigger modes, the GOS-620FG offers extra Function Generating which is required by most class experiments and production lines. The GOS-620FG is also capable of generating Sine/Square/Triangle waveforms in 0.1Hz~1MHz (7 range) frequency range with sine wave distortion as low as 2%.SpecificationCRTType6-inch rectangular type with internal graticule8 x 10 div (1div=1cm)Accelerating Potential2kVZ-Axis Input Sensitivity: Above 5Vp-pMax. input voltage: 30V (DC + AC peak)Bandwidth: DC ~ 2MHzPolarityPositive-going input decreaseFocus ControlAuto focusFUNCTION GENERATORFrequency Range0.1Hz ~ 1MHz (7 range)WaveformSine Wave, Square Wave, Triangle WaveFrequency Variable Range10:1 or moreOutput Impedance50Ω±10% VoltageOver 20Vpp(open circuit) continuous conversionDC offset possible over ±10V when openSinewave Distortion2% Max. (10Hz ~ 100kHz)Squarewave Unsymmetry±3% or less (in 1 kHz maximum)Squarewave Rise/Fall Time50Ω output: 120ns or lessVERTICAL SYSTEMSensitivity5mV ~ 5V/div ±3%, 1mV ~ 1V/div ±5% (using x5MAG)BandwidthDC to 20MHz (x 5MAG: DC to 7MHz)Rise TimeApprox. 17.5ns (x 5MAG: Approx. 50ns)Max. Input300V (DC+ACpeak) at 1kHzInput CouplingAC, DC, GNDInput ImpedanceApprox. 1MΩ // 25pFVertical ModeCH1,CH2,DUAL(ALT,CHOP),ADD,CH2 INVHORIZONTAL SYSTEMSweep Time0.2μs ~ 0.5s/div ±3% (±5% at x10 MAG)Max. Sweep Rate100ns/div (20ns and 50ns/div are uncalibrated)TRIGGERTrigger ModeAUTO, NORM, TV-V, TV-HTrigger SourceCH1, CH2, ALT, LINE, EXTTrigger Slope"+" or "-"X-Y OPERATIONSensitivity5mV ~ 5V/div ±4%X-axis BandwidthDC ~ 500kHzPhase Error3° or less from DC ~ 50kHzOUTPUT SIGNALCh1 Signal OutputVoltage: approx. 20mV/div into 50ΩBandwidth : 50Hz to 5MHz (-3dB)Impedance : Approx.50ΩCalibrator Output1kHz Square wave, 2Vpp±2%POWER SOURCE  AC 115/ 230V ±15%, 50Hz /60HzDIMENSIONS & WEIGHT  310(W) x 150(H) x 455(D)mm; Approx. 8.5kg Alat Laboratorium Umum

Features* 1mV/div High Vertical Sensitivity* Internal 5 Digits Real-Time Frequency Counter* LCD Readout Display for Vertical/ Horizontal/Frequency Measurement* Auto Time-Base* Buzzer Alarm* TV(TV-V, TV-H) Trigger Modes* XY Mode* Z-Axis Input and External Trigger InputDescriptionThe Economic Oscilloscope GOS-630FC establishes a brand new benchmark for similar categories. New and innovative functions, including LCD Readout Display, Frequency Counter, and Auto Time-Base setting, are provided as standard features. With a 30MHz bandwidth and valuable features, GOS-630FC is priced at the basic Oscilloscope level. 1mV/div High Vertical Sensitivity is able to capture small signal variations in the input source. Additional functions, such as XY mode display, MAG function (Time based Magnified), and Z-axis Input, extend the application range of GOS-630FC to both education and industry fields. The added values without being converted into extra cost make the GOS-630FC the most beneficial choice among the entry-level analog oscilloscopes available in today’s market.Specification VERTICAL SYSTEMSensitivity1mV ～ 5V/div , 12 steps in 1-2-5 sequenceAccuracy≦3%, (1mV/div, 2mV/div: 5%)Vernier Vertical Sensitivity≦1/2.5 of panel-indicated valueBandwidthDC～30MHz (1mV/div, 2mV/div: DC～7MHz)Rise TimeApprox. 11.7ns (1mV/div, 2mV/div: Approx. 50ns)Input ImpedanceApprox. 1MΩ //  25pFSquare Wave CharacteristicsOvershoot : 5% ( At 10mV/div range)Linearity<±0.1div of amplitude changeVertical ModesCH1, CH2, DUAL (ALT/CHOP), ADDChopping Repetition FrequencyApprox. 250kHzInput CouplingAC, DC, GNDMaximum Input VoltageCAT II 300V(DC+ACpeak)Common Mode Rejection Ratio50:1 or better at 50kHz sinusoidal waveIsolation Between Channels>1000:1at 50kHz, >30:1at 30MHz(at 5mv/div Range)CH1 Signal OutputAt least 20 mV/div at 50Ω terminal, frequency at least 50Hz to 5MHzTRIGGERINGTriggering SourceCH1, CH2, ALT, LINE, EXTCouplingAC : 20Hz to full bandwidthSlope+ / -Sensitivity20Hz ~ 2MHz: 0.5div, TRIG-ALT: 2div, EXT: 200mV2MHz ~ 30MHz: 1.5div, TRIG-ALT: 3div, EXT: 800mVTV: Sync pulse more than 1 div (EXT: 1V)Triggering ModesAUTO , NORM , TV-V , TV-HEXT TRIGGERING SIGNAL INPUTInput ImpedanceApprox. 1MΩ // 25pFMaximum Input VoltageCAT II 300V(DC+AC peak)HORIZIONAL SYSTEMSweep Time0.2μs ~ 0.5s/div, 20 steps in 1-2-5 sequenceSweep Time Accuracy±3%Vernier Sweep Time Control≦ 1/2.5 of panel-indicated valueSweep Magnification10 times×10MAG Sweep Time Accuracy±5% (20ns ~ 50ns/div are uncalibrated)Linearity±3%, ×10MAG:±5% (20ns/div and 50ns/div are uncalibrated)X-Y MODESensitivitySame as vertical axisBandwidthDC to at least 500kHzX-Y Phase Difference≦3° at DC ～50kHzZ AXISSensitivity5 Vpp (Positive-going signal decreases intensity)BandwidthDC ～ 2MHzInput ResistanceApprox. 47kΩMaximum Input VoltageCAI II 30V(DC+AC peak)CALIBRATION VOLTAGEWaveformPositive-going Square waveFrequencyApprox. 1 kHzDuty RatioWithin 48:52Output Voltage2Vpp ±2%Output ImpedanceApprox. 1 kΩFREQUENCY COUNTERDisplay DigitsMax. 5-digits decimalFrequency Range50Hz ~ 30MHzAccuracy±0.05%: 50Hz ~ 1kHz, ±0.02%: 1kHz ~ 30MHzMeasuring Sensitivity> 2divLCDDisplayVOLT/div, TIME/div, X-Y Mode, FrequencyBacklightOrangeCRTType6-inch rectangular type, internal graticulePhosphor & Acceleration VoltageP 31 & Approx. 2kVEffective Screen Size8 × 10 div (1 div = 10mm (0.39in))GraticuleInternalTrace RotationProvidedPOWER SOURCE Line VoltageAC 115V, 230V ±15% selectable, 50Hz/ 60HzSTORAGE ENVIRONMENTTemperature-10℃ to 70℃Humidity70%RH (Max.)DIMENSIONS & WEIGHT  310(W) x 150(H) x 455(D) mm; Approx. 8.2kgAlat Laboratorium Umum

Features* 200MHz Bandwidth, Dual Channel, Delayed Sweep* Auto Set* Built-in 6 Digits Counter* Cursor Readout with 7 Measurements* 10 Sets Memory for Front Panel Setting Save & Recall* TV-Line Selection (NTSC, PAL, SECAM)* Panel Setup Lock of Digital-Control Functions* Buzzer Alarm* LED IndicatorsThe GOS-6200 Analog Oscilloscope satisfies the massive needs for diverse professional applications up to 200MHz. Embedded with Delay Sweep and Hold Off features, the GOS-6200 is capable of measuring sophisticated signals. The Cursor Readout with 7 measurements, Panel Setup Save/Recall, and the built-in 6 Digit Universal Counter all make waveform observation and measurement easier, faster and more accurate. The advanced Time Base Auto Range function acquires waveforms only with one push of a button. The Counter function, 10 memory settings, and advanced Auto functions are among some of the extra benefits available in GOS-6200. SpecificationCRTType6-inch rectangular type with internal graticule;0%, 10%, 90% and 100% markers8 x 10 div (1 div = 1 cm)Accelerating Potential14 kV approx.IlluminationContinuously adjustableZ-axis inputCoupling : DCSensitivity: 5V or moreMaximum input voltage : 30V (DC + AC peak) at 1kHz or less Bandwidth : DC ~ 5 MHzVERTICAL SYSTEMSensitivity2mV~5V/div, 11 step in 1-2-5 sequenceSensitivity Accuracy≦3% (5div at the center of display)Vernier Vertical SensitivityContinuously variable to 1/2.5 or less of panel-indicated valueBandwidth(-3dB)DC~200MHz (5mV/div:DC~150MHz) ; (2mV/div:DC~20MHz)Rise Time1.75ns (5mV/div:2.33ns, 2mV/div:17.5ns)Signal DelayLeading edge can be monitoredMax. Input Voltage400V(DC+AC peak) at 1kHz or lessInput CouplingAC, DC, GNDInput Impedance1MΩ ±2% // approx. 25pFVertical ModeCH1,CH2,DUAL(CHOP/ALT), ADD, CH2 INV.Bandwidth Limited20MHzCommon-Mode Rejection Ratio50:1 or better at 50kHzDynamic Range8 div at 100MHz; 5div at 200MHzHORIZONTAL SYSTEMHorizontal ModesMAIN(A), ALT, DELAY(B)A(main) Sweep Time20ns~0.5s/div, continuously variable (UNCAL)B(delay) Sweep Time20ns~50ms/divAccuracy±3% ( ±5% at x 10 MAG)Sweep Magnificationx 10 (maximum sweep time 2ns/div)Hold Off TimeVariableDelay Time1μs~5sDelay JitterBetter than 1:20000Alternate SeparationVariableTRIGGERTrigger ModesAUTO, NORM,TVTrigger SourceCH1, CH2, LINE, EXT, EXT/10Trigger CouplingAC, DC, HFR, LFR, NRTrigger Slope"+" or "-" polarity or TVsync polarityTrigger SensitivityModeFrequencyINTEXTEXT/10AUTO10Hz~20MHz20MHz~200MHz0.35div1.5div50mV150mV500mV1.5VNORMDC~20MHz20MHz~200MHz0.35div1.5div50mV150mV500mV1.5VTVsync signal1div200mVpp2VppTrigger Level RangeINT: ±4div or more; EXT: ±0.4V or more; EXT/10: ±4V or moreTV TriggeringMode:TV-V, TV-H, TV-LINETV-Line SelectionStandardField 1Field 2NTSC (525H)1H ~ 263H1H ~ 262HPAL (625H)1H ~ 313H1H ~ 312HSECAM (625H)Max. External Input Voltage400V(DC+AC peak) at 1kHzExternal Input Impedance1MΩ±5% // approx.25pFX-Y OPERATIONModeX-axis: selectable CH1, EXT, EXT/10Y-axis: selectable CH1, CH2, CH1 and CH2Sensitivity Accuracy2mV~5V/div±3%EXT : 0.1V/div±5%EXT/10 : 1V/div±5%X-axis BandwidthDC~500kHz(-3dB)Phase Error3° or less from DC~50kHzOUTPUT SIGNALCh1 Signal OutputVoltage: approx. 25mV/div into 50ΩFrequency response : DC ~ 10MHzCalibrator Output1kHz Square wave, 2Vpp±2%CURSOR READOUT FUNCTIONCursor Measurement Function  ΔV, ΔV%, ΔVdB, ΔT, 1/ ΔT, ΔT%, ΔθCursor Resolution1/100 DIVEffective Cursor RangeVertical: ±3div ; Horizontal: ±4 divPanel Setting DisplayVertical: V/div(CH1,CH2),UNCAL,ALT/CHOP/ADD,INV, probe factor,AC/DC/GNDHorizontal: s/div(MTB, DTB), UNCAL, x 10MAG, Delay time, Hold-offTrigger: source, coupling, slope, level, TV-V, TV-HOthers: X-Y, lock, save/recall MEM 0-9AUTO MEASUREMENT FUNCTION Parameter FunctionFREQ, PERIOD,±WIDTH,±DUTY (+ or - polarity selected by trigger slope)Display DigitsMax. 6-digits, decimalFrequency Range50Hz ~ 200MHzAccuracy1kHz ~ 200MHz : ±0.01% ; 50Hz ~ 1kHz : ±0.05%Measuring Sensitivity> 2 div (Measuring source selected from CH1 and Ch2 as synchronous signal sources)SPECIAL FUNCTIONAuto SetInput Channel : CH1, CH2Frequency Response 50Hz ~ 50MHzPanel Setting Save & Recall10 setsPanel Setups LockProvidedPOWER SOURCE  AC 100V/120V/230V±10% , 50/60HzACCESSORIES  User manual x 1Power cord x 1GTP-250A: 250MHz Probe (10:1/1:1) Switchable Passive Probe (One per channel)DIMENSIONS & WEIGHT  310(W) x 150(H) x 470(D) mmApprox. 9kgAlat Laboratorium Umum

Features* 50MHz Bandwidth, Dual Channel* Delayed Sweep (GOS-653G)* Built-In Delay Line (GOS-653G)* TV Synchronization* CH1 Output* Z-Axis Modulation Input* ALT Triggering Function* Hold Off Function* Trigger Level Lock FunctionDescriptionThe 50MHz GOS-653G/652G Series is an example of classic analog oscilloscope design. The GOS-653G /652G cover a broad range of industry applications, such as product design, assembly lines, repair & servicing, and educational purposes for EE laboratories and class experiments. Coupled with various trigger functions (Auto, Norm, TV), complex waveforms can be easily triggered for use in diverse applications. The ALT Trigger function enables users to observe signals from dual channels simultaneously. The Hold Off function helps stabilize sophisticated signals within repetitive frequencies or periods. Delayed sweep magnification (GOS-653G) can display and zoom in waveforms at the same time. For classic design and operation applicable to a wide range of applications, the GOS-653G/652G Series offers extra value.SpecificationCRTType6-inch rectangular type with internal graticule0%, 10%, 90% and 100% markers.8 x 10 div (1div=1cm)Accelerating Potential12kVIlluminationContinuously adjustableZ-axis Input Input Impedance: Approx. 5kΩSensitivity:Above 3Vp-pBandwidth:DC ~ 5MHzVERTICAL SYSTEMSensitivity5mV ~ 5V/div±3%,1mV ~ 2mV/div±5%BandwidthDC ~ 50MHz DC ~ 15MHz at 1 ~ 2mV/divRise Time7ns (23.3ns for 1 ~ 2mV/div)Signal Delayleading edge can be monitored (GOS-653G only)Input ImpedanceApprox. 1MΩInput Coupling AC, DC, GNDVertical Mode CH1, CH2, DUAL, ADD, CH2 INV(Dual automatic switching ALT and CHOP)HORIZONTAL SYSTEMA(main) Sweep Time0.1μs ~ 0.5s/div ±3%100ns ~ 50ms/div ±5% (x 10 MAG)10ns ~ 50ns ±8% (x 10 MAG)B(delay) Sweep Time0.1μs ~ 0.5ms/div ±3% 100ns ~ 50μs/div ±5% (x 10 MAG) 10ns ~ 50ns/div ±8% (x 10 MAG)Delay Time1μs ~ 5ms/div ±5% (GOS-653G only)Delay Time JitterBetter than 1:10000 (GOS-653G only)TRIGGERTrigger ModeAUTO, NORM, SINGLETrigger SourceCH1, CH2, ALT, LINE, EXTTrigger CouplingAC, DC, HF REJ, TVTrigger Slope"+" or "-"X-Y OPERATIONSensitivity5mV ~ 5V/div±4%X-axis BandwidthDC ~ 2MHzPhase Error3° or less from DC ~ 100kHzOUTPUT SIGNALCh1 Signal OutputVoltage: approx. 50mV/div into 50ΩCalibrator Output1kHz Square wave, 2Vpp±2%POWER SOURCE  AC 100V/ 120V/ 220V/ 230V ±10%, 50Hz/ 60HzDIMENSIONS & WEIGHT  310(W) x 150(H) x 455(D) mm; Approx. 8.2kgAlat Laboratorium Umum

GDS-122The GDS-122 is a reliable and handy instrument for all test and electronic engineers. This model is designed to carry out complicated on-site tests. The Dual-channel unit features 20MHz of bandwidth with a sampling rate of 100MS/s along with multimeter functionality. The color LCD display with a resolution of 320 x 240 helps you to read waveforms easily, especially when displaying a lot of data or multiple waveforms. The compact design with the total weight of 690g allows engineers to carry it around easily. The protective cover of the unit is insulated and specially designed to guarantee endurance and reliability in tough environments. The rechargeable Li-ion battery ensures convenience for on-site testing.Features20MHz Bandwidth100MS/s Real-Time Sampling RateTrue RMS Multimeter: Volt, AMp, Ohm, Continuity, DiodeDual Independent Floating Isolated ChannelsTrigger Mode: Free Run, Single Shot, Edge, VideoUSB Interface6 Hour Capacity Li-ion Rechargeable Battery3.8" Color LCD, Resolution: 320 x 240Light Weight: 690g AccessoriesUser manual x1AC-DC Adaptor x1Probe-T5060: 60MHz (10:1/1:1) switchable passive probe (one per channel)Multimeter test lead x1Serial data communication cable x1Extension module for small capacitance measurement x1Extension module for large current measurement x1Alat Laboratorium Umum

GOS-6100 SeriesThe GOS-6100 Series is a 100MHz, two-channel, dual-sweep, and portable oscilloscope for general purpose use. A microprocessor-based operating system controls most of the functions of the instrument, including cursor readout and digitized panel setting.The vertical deflection system has two input channels. Each channel has 11 basic deflection factors from 2mV to 5V per division. The horizontal deflection system provides single, dual or delayed sweeps from 0.5s to 50ns per division (delayed sweep, 50ms to 50ns per division). The trigger system provides stable triggering over the full bandwidth of the vertical deflection system. AccessoriesUser manual x 1, Power cord x 1GTP-100A-4: 100MHz (10:1/1:1) Switchable Passive Probe (one per channel)Optional AccessoriesGTL-110  Test lead, BNC-BNC headsGTC-001  Instrument cart, 450(W) x 430(D)mm (120V input socket)GTC-002  Instrument cart, 330(W) x 430(D)mm (120V input socket)Alat Laboratorium Umum

GOS-6000 Series Analog OscilloscopesThe GOS-6000 Series Analog Oscilloscopes provides a remarkable combination of high performance and compact design in bandwidth ranging between 50 MHz. Coupled with various trigger functions, waveforms can be acquired and observed in diverse application fields. Signals can be magnified by a ratio of x5, x10 and x20 in the use of the ALT MAG function. Together with the Cursor Readout and Frequency Counter functions (GOS-6051), the GOS-6000 Series offers tremendous value for your investment in testing and analysis.Features2 Channels, 4 Traces:DC~50M/30MHz Bandwidth1mV/div ~ 20V/divCRT ReadoutCursor Measurement, 6 Digit Frequency Counter, 10 sets Memory forFront Panel Setting Save & RecallALT, MAG Function (x 5, x 10, x 20)Vertical Mode TriggeringTV SynchronizationBuzzer Alarm & LED IndicatorsSpecifications  GOS-6051GOS-6031Digital / AnalogAnalogDisplay6" CRTBandwidth (MHz)5030Number of Channel22Vertical Sensitivity1mV ~ 20VTime Base Range0.2μs ~ 0.5sInput Impedance Selection1MΩAuto Measurement-Waveform Memory-Panel Setup MemoryVAuto-Set-Auto/Normal TriggerVALT TriggerVTV TriggerVCursor ReadoutVXY ModeVZoomVGo/NoGo-Zoom FFT-Counter FunctionVFunction Generator-Interface-Buzzer AlarmVBattery Power Operation-LED IndicatorsVZ-Axis InputVPower SourceAC 100/120/230V ±10%AccessoriesUser manual x 1, Power cord x 1GTP-060A-4: 60MHz (10:1/1:1) Switchable Passive Probe (one per channel)Optional AccessoriesGTL-110  Test lead, BNC-BNC headsGTC-001  Instrument cart, 450(W) x 430(D)mm (120V input socket)GTC-002  Instrument cart, 330(W) x 430(D)mm (120V input socket)Alat Laboratorium Umum

The GOS-622G are general purpose analog oscilloscopes with 20MHz bandwidth, respectively. These products are designed for a wide range of applications ranging from product designs or assembly lines to EE laboratories or class experiments. Featuring a low vertical sensitivity at 1mV/div and versatile triggering, the GOS-622G can reliably capture small signals. The GOS-622G is the highest performance/price solution in the Test & Measurement market.Features20MHz Bandwidth, Dual Channel (GOS-622G)High Sensitivity 1mV/divTV SynchronizationZ-Axis InputALT Triggering FunctionHold Off Function (GOS-622G)CH1 OutputUser manual x 1, Power cord x 1GTP-060A-4 : 60MHz ( 10 : 1/1 :1 ) Switchable Passive Probe for GOS-635G/GOS-622G (one per channel)Optional AccessoriesGTL-110  Test lead, BNC-BNC headsGTC-001  Instrument cart, 450(W) x 430(D)mm (120V input socket)GTC-002  Instrument cart, 330(W) x 430(D)mm (120V input socket)Alat Laboratorium Umum