HAZ DUST

An affordable, easily deployable, and portable air monitor designed for measuring trace level for ambient air pollution. The unique sampling design allows for real-time data and filter gravimetric analysis utilizing the FRM 47mm Cassette located directly behind the optical sensor. EPAM-5000 offers a weather tight carrying case, temperature compensated electronics, easy to clean optical sensor and a standard 24 hour battery or continuous sampling with solar power panel accessory. Network up to 8 Haz-Dust™ Model EPAM-5000 systems and add up to 5 miles wireless data transmission to central PC or MAC computer.FeaturesReal-Time display and data storage47mm FRM cassetteHigh correlation to EPA FRME-Z to clean optical sensor & 4.0Lpmuser adjustable sampling pumpNetwork 8 systems togetherSpecificationWeatherproof EnclosureInline 47mm FRM CassetteSensing range: .001-20.0 and/or .01-200.0 mg/m³PM size range: .1-100 µmSampling flow rate: 4.0 LPMAlarm output: 90 db at 3 ftAnalog Output: 0-2 VdcDigital output: RS-232–Record Time: 1 s. to 15 mon.Display: Real-Time mg/m3Operating temp: -10°C -50°C Battery: Rechargeable 24hrWeight: 12 lbsDimensions: 14 x 6 x 10 in.Alat Laboratorium Umum

Air-Aide Model AA-3500 Airborne Particulate Monitor provides accurate and instantaneous display of concentration readings on lung damaging particulates and aerosols. AA-3500 is a portable handheld survey tool for measuring lung damaging particulate matter. The unique sensor design has applications in indoor air quality (IAQ), HVAC, environmental and industrial hygiene. Results are immediately displayed and stored in memory. The supplied PC software allows for graphical and statistical representation of the total dust generating process, eliminating the need for repetitive and costly filter gravimetric laboratory analysis.FeaturesDirect Reading with high resolutionSize selective inletsOn-screen programingCE, ETL approvedOptional wireless data transmission to computerApplicationsVentilations system analyzerSurvey of work place complianceIAQ for respirable particulates“Green Buildings” CertificationExposure monitoring of all dusts and aerosolsSpecificationsWeatherproof EnclosureSensing range: .001-20.0 and/or .01-200.0 mg/m³PM size range: .1-100 µmSampling flow rate: 2.0 LPMAlarm output: 90 db at 3 ftAnalog output: 0-2 VdcDigital output: RS-232–Record Time: 1 s. to 15 mon.Display: Real-Time mg/m3Operating temp: -10°C -50°CBattery: Rechargeable 24hrWeight: 12 lbsDimensions: 14 x 6 x 10 in.Alat Laboratorium Umum

Haz-Dust™ Model AQ-10 Air Quality Particulate Sensor is a versatile transducer designed to continuously monitor for the presence of airborne particles. The AQ-10 is calibrated for OSHA and EPA regulations. Suitable for monitoring emissions from cyclone, precipitators, bag houses or any dust control device. The AQ-10 ideal for monitoring air quality in underground transportation systems, ventilation systems, indoor workplace or any other application where immediate data on smoke, dust, fumes or mists is needed.ApplicationsMultipoint monitoring of in-plant dust generating processesActivates air cleaners/ventilation systemsMonitor in-line filter intergityAerosol exposure studiesDry solids process controlFeaturesFlex DesignAnalog OutputMultipointAlarm OutputAlarm OutputSpecificationsNEMA 4X HousingSensing range: .01-200, .001-20.0 , .01-200.0, mg/m³PM size range: .1-50 µmPower: 110 or 220VACAlarm output: 7 VDCSignal output: 4-20mA 0-1 volt (optional)Operating temp: -4°F to 150°FWeight: 3 lbsDimensions: 7.5 x 4.5 x 4 in.Alat Laboratorium Umum

HAZ-DUST™ EPAM-7500 is a lightweight 7 pound portable monitor and air station for real time measurements of particulate matter temperature and relative humidity in ambient and indoor air. Interchangeable size-selective sampling heads allow PM-10, PM-2.5, PM-1.0 or TSP monitoring. Optional accessories for measuring wind speed and direction are available. A filter holder postponed directly behind the optical sensor provides concurrent gravimetric sampling for cross calibration of optical sensor, further particulate speciation and determination of metal and carbon content.SpecificationsWeatherproof EnclosureInline 47mm FRM CassetteSensing range: .001-20.0 and/or .01-200.0 mg/m³PM size range: .1-100 µmSampling flow rate: 4.0 LPMAlarm output: 90 db at 3 ftAnalog Output: 0-2 VdcDigital output: RS-232–Record Time: 1 s. to 15 mon.Display: Real-Time mg/m3Operating temp: -10°C -50°CBattery: Rechargeable. Approximately 12 hoursWeight: 7 lbsDimensions: 14 x 6 x 10 in.ApplicationsHazardous Waste SitesDust suppression/engineering controlsWalk through IAQ studiesQuantification of particulate mitigation.Hot Spot location and identification.FeaturesLight-weight 7 pounds!Color touch screenUltrasonic Wind Speed and DirectionGPSDew Point & Barometric pressureWireless OptionSolar OptionAlat Laboratorium Umum

The product is designed for measuring diesel particulate matter for Industrial Hygiene and Environmental air investigations. The DPM-4000 is individually worn and offers immediate determination and data storage of air borne diesel particulate concentrations in micrograms per cubic meter. This is the only commercially available personal direct reading aerosol monitor specifically designed and calibrated for measuring occupational exposures of diesel particulate matter in the work place.ApplicationsDiesel Engine SurveysCombustion EfficiencyMiningTransportation (i.e. bus depots, trucking, freight)Survey tool for MSHA and NIOSH Compliance ProgramsFeaturesDirect Readings in ug/m³Comfortable light weightMiniaturized Sensor DesignAdjustable Alarm SignalRFI/EMI ProtectionSpecificationsWeatherproof EnclosureInline 37 mm disposablePM size range:Sesoning Range: 1-20,000µg/m³Sampling flow rate: 1.0-3.3 LPMAlarm output: 90 db at 3 ftAnalog Output: 0-2 VdcDigital Output: RS-232Record Time: 1 s. to 21 wks.Operating temp: 0 to 50°CBattery: Rechargeable 24hrWeight: 2 lbsDimensions: 5.5 x 3.25 x 2.75Alat Laboratorium Umum

This portable sampler is controlled by a portable timer, which can be set to program six sampling runs within 24 hours. The sampler has been designed for easy installation at a variety of sampling locations. When used outdoors it is mounted on a variety of structures, such as telephone poles, light posts, fence posts, etc. The Dust-Sol DS-2.5 Samper is a device for monitoring PM-10 and PM 2.5 Air. Small durable, lightweight, and battery operated, it is a ideal for monitoring in remote areas or where no permanent site has been established.FeaturesUses 47mm filter mediaAC/DC power sources with battery indicatorProgrammable 7-day, 24 hour timerElapsed time indicatorWeather Proof ConstructionApplicationsPM-10, Pm2.5 and TSPFugitive Emission SamplingSaturation MonitoringControlled Burning StudiesEvaluates Pollution ControlSpecificationsNema 4X HousingPump: Pulse Free Diaphragm pump rated for 10,000 hours of continuous serviceInline 47mm FRM CassetteProgrammable: 7-day timerPower: AC or DC OperationSampling flow rate: 5.0 LPMIndicator: Low Flow & Low Battery indicator and shut offWeight: 15lbs with batteryDimensions: 12x14.5x9 in.Alat Laboratorium Umum

SM-4000 Real-Time Personal Silica Monitor The SM-4000 air sampler is mounted in the OSHA defined breathing zone allowing for a more accurate representation of workers exposure. Having a Real-Time Optical Sensor placed in the breathing zone, reduces inner wall dust deposition, experienced by other Real-Time optical devices on the market. In addition, having a gravimetric filter cassette directly behind the optical sensor allows for maximum particle deposition on the filter and thus a more accurate representation of worker exposure. The SM-4000 offers Real-Time Concentration Readings and the DustComm Software allows for graphical analysis and comprehensive time history reporting.Foundry WorkOSHA complianceStone CuttingQuarry WorkTunnelingRock DrillingAny occupation which cuts, chips, drills, grinds silica into respirable size fractionsSpecificationsBelt mounted enclosureInline 37mm Filter CassetteSensing range: 1-20,000 ug/m3PM size range: 0.1 to 10μmSampling flow rate: 2.75 LPM User adjustableSampling Inlet: SKC GS-3 CycloneAlarm output: 80 dbDigital output: RS-232-Record Time: 1 s – 21 weeksDisplay: Real-Time ug/m3Operating temp: -10°C to -50°CBattery: Rechargeable 8hrWeight: 1.5 lbsDimensions: 5.4 x 3.3 x 2.7 inFeaturesDirect ReadingOptical & Filter SamplerSensor & Filter mounts in breathing zoneSKC’s GS-3 Cylone – conforms to ISO 7708 StandardsOptional Wireless Data TransmissionAlat Laboratorium Umum

Haz-Dust™ Model HD-1100 is an affordable Real Time Dust Monitor Designed for Industrial Hygiene, Indoor Air Quality and Haz-Mat air monitoring Investigations providing accurate and instantaneous data on airborne particle concentrations, in accordance with the regulatory USA NIOSH method 0600 for lung damaging Respirable particulates. When coupled with the DL-103 data logger, maximum automation is achieved for data collection, statistical analysis, graphs and detailed report generation. Software is completely Windows compatible and easy to use.Survey for OSHA/EPA complianceMonitor dust generation during drilling/excavation operationsLocating and ID “Hot Spots”Emergency Response & fugitive emissions complianceDust collector/ventilation system checksSpecificationDisplay: LCD in mg/m3Sensing range: 0.01-200mg/m3PM size range: 0.1-50μmAnalog output: 0-2 voltsBattery: 6VDC NiMH rechargeableData logger: OptionalOperating time: >8 hoursOperating temp: 0°C -50°CWeight: 2 lbsDimensions: 9x3x1.5 in.FeaturesHandheldEasy operationHigh SensitivityRugged ConstructionOptional Data Logger & SoftwareAlat Laboratorium Umum

HD-1004 Real-Time Personal Particulate Monitor is the only direct reading instrument designed for true breathing zone measurements and comprehensive graphical reporting. The miniature & size selective optical sensor mounts within the OSHA defined breathing zone. The attached 37mm filter cassette allows for concurrent gravimetric and analytical sampling of lung damaging particulates. Calibrated to use for United States OSHA/NIOSH Occupational Health Reference Methods.SpecificationBelt mounted enclosureInline 37mm Filter CassetteSensing range: 0.01-200 mg/m3PM size range: 0.1 to 100 μmSampling flow rate: 2.0 LPMAlarm output: 80 dbDigital output: RS-232-Record Time: 1 s – 21 weeksDisplay: Real-Time mg/m3Operating temp: -10°C to -50°CBattery: Rechargeable 8hrWeight: 1.5 lbsDimensions: 5.4 x 3.3 x 2.7 inFeaturesDirect ReadingOptical & Filter SamplerSensor mounts in breathing zoneRespirable, Thoracic, &Inhalable inletsOptional Wireless Data TransmissionAlat Laboratorium Umum

The Haz-Scanner™ Model GB-2000 portable indoor air quality monitor is designed to measure levels of lung-damaging particulates, carbon dioxide, and carbon monoxide as well as temperature and relative humidity. Standard features include: an inline 25 or 37 millimeter gravimetric filter cassette for concurrent filter sampling for chemical and biological analysis: data logging and real-time wireless data transmission, and easy to use, PC-compatible software for creating compliance ready graphical reports. With interchangeable sensors, the device can be configured to provide 12 simultaneous critical air measurements.ApplicationsToxic SchoolsLEED BuildingsEPA IEQ MonitoringOSHA Respiratly HealthUS EPA air monitoring studiesPM 2.5, PM 10, PM 4.0, PM 1.0CO, CO2, NO2, SO2, O2, VOCSound, light, ELF, Atomic Radiation, Air VelocityFeaturesReal-Time display and data storage25mm or 37mm FRM cassette.Add up to 12 air parametersWirelessly Network 8 systems togetherEasy to use graph and reporting softwareSpecificationsSensing range: .01-200.0 mg/m³PM size range: .1-100 µmSampling flow rate: 2.0 LPM user adjustableRecord Time: 1 s. to 21 weeksBattery: Rechargeable up to 7 hours. Continuous AC power.Weight: 6 lbsC0: 0-1000ppmCO2: 0-10,000 ppmCHOH: 0-4ppmNO2: 0-20 ppmO2: 0-30% Vol.VOC: 0-2000 ppmSO2: 0-20 ppmAlat Laboratorium Umum