HORIBA

Horiba LAQUAtwin Ca-11 Pocket Water Quality Meters (CALCIUM ION METER) with backlithingFeaturesThe only pocket meter that directly measures calcium ion concentration in 0.3ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.Minimum sample volume: 0.3ml (0.05ml with sampling sheet B)Up to 2 calibration pointsAuto standard recognition: 150 & 2000ppm calcium (default)Changeable high and low calibration valuesMultiplication compensation: 0.01 to 9.90Temperature and mV displayTemperature calibration: 5 to 40.0 ºCAuto hold / auto stable measurementAuto power off: 30 mins.Low battery indicatorIP67 Rating dust & waterproofReplaceable sensor400 Hours battery life: continuous use without backlightMaterial: ABS epoxyDisplay: custom (monochrome) digital LCD with backlightOperating conditions: 5 to 40 ºC, 85% or less relative humidityWarranty: 2 years - meter, 6 months - sensorPacked in handy carrying caseSupplied with 150 & 2000ppm calcium standards, 5 x sampling sheets B, 2 x CR2032 batteries, dropper, instruction and quick manuals SpecificationModelCa-11Measurement PrincipleIon Selective ElectrodeMinimum Sample Volume0.3ml (0.05ml with sampling sheet B)Measurement Range4 to 9900 ppm (mg/L)0.1 to 250 mmol/LResolution0 to 99 ppm: 1 ppm100 to 990 ppm: 10 ppm1000 to 9900 ppm: 100 ppmAccuracy± 20% of actual valueCalibration PointsUp to 2Temperature Display0 to 50.0 ºCTemperature Calibration5 to 40.0 ºCDisplayCustom (monochrome) digital LCD with backlightOperating Temperature5 to 40.0 ºCOperating Humidity85% or less relative humidity (no condensation)PowerCR2032 batteries (2)Battery LifeApprox. 400 hours in continuous use without backlightMaterialABS epoxyDimensions164 x 29 x 20 mm (excluding projections)MassApprox. 55 g (including sensor and batteries)Functions Auto Standard RecognitionChangeable High and Low Calibration ValuesMultiplication CompensationTemperature CalibrationAuto Hold / Auto Stable MeasurementSwitchable BacklightAutomatic Power Off (30mins)Low Battery IndicatorIP67 Dust / WaterproofReplaceable Sensor  ApplicationQuick Nutrient Analysis in Strawberry ProductionMeasurement of Calcium in SoilMeasurement of Calcium in Milk and Milk BeveragesAquarium Water TestingMeasurement of Calcium in Drinking Water Alat Laboratorium Umum

Horiba LAQUAtwin EC-22 COMPACT COND/TEMP METER 3 point calibration ) with back lithingFeaturesThe only pocket meter that directly measures conductivity in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.Minimum sample volume: 0.12mlUp to 3 calibration pointsConductivity and temperature displayAuto rangeAuto calibrationAuto standard recognition: 1413µS/cm, 12.88mS/cm, 111.8mS/cmAuto temperature compensation: 2%/ºC fixedTemperature calibration: 5 to 40.0 ºCAuto stable / auto hold measurementAuto power off: 30 mins.Low battery indicatorIP67 Rating dust & waterproofReplaceable sensor400 Hours battery life: continuous use without backlightMaterials: ABS epoxy body & titanium coated with platinum black sensorDisplay: custom (monochrome) LCD with backlightOperating conditions: 5 to 40°C, 85% or less relative humidityWarranty: 2 years - meter, 6 months - sensorPacked in handy carrying caseSupplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals   SpecificationModelEC-11EC-22EC-33Measurement Principle2 Electrode Bipolar ACMinimum Sample Volume0.12mlConductivity Range & Resolution0 to 199 µS/cm: 1µS/cm200 to 1999 µS/cm: 1µS/cm2.00 to 19.99 mS/cm: 0.01 mS/cm20.00 to 199.9 mS/cm: 0.1 mS/cm••• ••••••••TDS Range & Resolution0.0 to 99.9 ppm: 0.1 ppm100 to 999 ppm: 1 ppm1000 to 9990 ppm: 10 ppm  •••TDS CurvesTDS Factor (0.4 - 1.0), EN 27888, 442, NaCl  •Conductivity Calibration PointsUp to 2Up to 3•  • •Accuracy±2% full scale (for each range)±2% full scale (0 to 19.99 mS/cm)±5% full scale (20.0 to 199.9 mS/cm)•   •• ••Temperature Display0 to 50.0 °C ••Temperature Calibration5 to 40.0 ºC ••DisplayCustom (monochrome) LCD with backlightOperating Temperature5 to 40°COperating Humidity85% or less relative humidity (no condensation)PowerCR2032 batteries (2)Battery LifeApprox. 400 hours in continuous use (without backlight)Dimensions164 × 29 × 20mm (excluding projections)MassApprox. 50 g (including sensor and batteries)FunctionsAuto RangeAuto CalibrationAuto Standard RecognitionAuto Temperature Compensation (2%/°C fixed)Temperature Calibration (only for EC-22 & EC-33)Auto Stable / Auto Hold MeasurementAuto Power Off (30mins)Switchable BacklightLow Battery IndicatorIP67 Dust / WaterproofReplaceable Sensor AccessoriesStandard SolutionspH BuffersConductivity Standard SolutionsIon Standard Solutions & Ionic Strength AdjustorsORP PowdersElectrode Filling SolutionsElectrode Cleaning SolutionsAlat Laboratorium Umum

 FeaturesAutomatic pH calibration up to 5 points using NIST, USA or Custom pH buffers0.01 pH resolutionOffset and slope display Automatic / manual temperature compensationTemperature calibration functionAuto log dataBuilt-in memory can store up to 1000 dataAuto-shut off (programmable: 1 to 30 minutes)Auto-Hold / Auto-Stable measurementCalibration alarm (programmable 1 to 400 days)Built-in electrode holder allows 2 electrodes to be attached on both sides of the meterLarge backlit LCD: 52mm x 64mmRS232C output for connecting the meter to a compatible printer or computerIP67-rated case: waterproof (withstand 30 mins. immersion in 1m depth of water) and dustproofPowered by 2 x AAA (LR03) or Ni-MH rechargeable batteries or power adaptorPackaged in new molded carrying case2 years meter warrantyMeter Kits Available PH120-K  Package Details:LAQUAact PH120 pH/ORP/Temp handheld meter with built-in electrode holder and 2 x AAA batteries9651-10D plastic-body, gel-filled pH electrode with integrated temperature sensor4.01, 7.00, 10.01 pH buffers (60ml each)Instruction manualCarrying casePH120-KNMeter kit with 6.86 and 9.18 pH buffers (in place of 7.00 and 10.01 pH buffers)  SpecificationModelLAQUAact PH120pH/ORP/Temperature(°C)pH Range-2.00 to 16.00 pHResolution0.01 pHAccuracy± 0.01 pHCalibration PointsUp to 5Buffer OptionsUSA / NIST / CustomORP Range± 2000 mVResolution1 mVAccuracy± 1mV or 1% of reading (whichever is greater)Temperature Range-30.0 to 130.0 °CResolution0.1 °CAccuracy± 0.4 °CCalibration OptionYesMemory Data1000Auto Log DataYesReal-time ClockYesDate / Time StampYesAuto-Shut OffYes (Programmable: 1 to 30 minutes)Auto-Hold / Auto-StableYesOffset / Slope DisplayYes (Independent acid and alkaline slopes depending on calibration)Calibration AlarmYes (Programmable: 1 to 400 days)Electrode StatusOn screen displayDiagnostic MessagesYesDisplayCustom Backlit LCDInputsBNC, phono, DC socketsOutputRS232CIP RatingIP67, shock-resistantPower Requirements2 x AAA (LR03) or Ni-MH rechargeable batteries or power adaptorBattery Life> 500 hours AccessoriesStandard SolutionsElectrodesAccessoriesAlat Laboratorium Umum

pH 22 -  COMPACT LAQUAtwin pH METER  ( 3 point Calibration ) with back lithingFeaturesThe only pocket meter that directly measures pH in 0.1ml sample (or 0.05ml sample with sampling sheet B). Unique sensor allows measurement of viscous liquids, solids, and even powder samples. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the flat sensor. This procedure saves you time and prevents wasting your precious sample.Minimum sample volume: 0.1ml (0.05ml with sampling sheet B)Up to 3 calibration pointspH and mV displayAuto calibrationAuto buffer recognition: USA & NIST pH buffersAuto temperature compensationAuto stable / auto hold measurementAuto power off: 30 minsLow battery indicatorIP67 Rating dust & waterproofReplaceable sensor400 Hours battery life: continuous use without backlightMaterial: ABS epoxy Display: custom (monochrome) LCD with backlightOperating conditions: 5 to 40°C, 85% or less relative humidityWarranty: 2 years - meter, 6 months - sensorPacked in handy carrying caseSupplied with pH 4.01 & 7.00 buffers (14ml each), 2 x CR2032 batteries, dropper, instruction and quick manuals   Alat Laboratorium Umum

Horiba LAQUAtwin SALT 11 meter Salinity tester waterproof.COMPACT SALT/COND METER LAQUATWIN ( 2 point calibration ) with back lithing.FeaturesThe only pocket meter that directly measures conductivity in 0.12ml sample and converts it into salinity or salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.Minimum sample volume: 0.12mlSalinity and temperature displayUp to 2 calibration pointsAuto calibrationAuto standard recognition: 0.50 & 5.00 % NaClAuto temperature compensation: 2%/ºC fixedTemperature calibration: 5 to 40.0 ºC2 Salinity curves: NaCl & SeawaterAuto stable / auto hold measurementAuto power off: 30 mins.Low battery indicatorIP67 Rating dust & waterproofReplaceable sensor400 Hours battery life: continuous use without backlightMaterial: ABS epoxy body & titanium coated with platinum black sensorDisplay: custom (monochrome) digital LCD with backlightOperating conditions: 5 to 40°C, 85% or less relative humidityWarranty: 2 years - meter, 6 months - sensorPacked in handy carrying caseSupplied with 0.5% & 5.0% NaCl standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals Alat Laboratorium Umum

Horiba LAQUAact pH110 - Waterproof pH/ORP handheld meter FeaturesAutomatic pH calibration up to 5 points using NIST or USA pH buffers0.01 pH resolutionOffset and slope display Automatic / manual temperature compensationTemperature calibration functionBuilt-in memory can store up to 100 dataAuto-shut off (programmable: 1 to 30 minutes)Auto-Hold / Auto-Stable measurementBuilt-in electrode holder allows 2 electrodes to be attached on both sides of the meterLarge LCD: 52mm x 64mmIP67-rated case: waterproof (withstand 30 mins. immersion in 1m depth of water) and dustproofPowered by 2 x AAA (LR03) or Ni-MH rechargeable batteries or power adaptorPackaged in new molded carrying case2 years meter warrantyMeter Kits Available PH110-K  Package Details:LAQUAact PH110 pH/ORP/Temp handheld meter with built-in electrode holder and 2 x AAA batteries9651-10D plastic-body, gel-filled pH electrode with integrated temperature sensor4.01, 7.00, 10.01 pH buffers (60ml each)Instruction manualCarrying casePH110-KNMeter kit with 6.86 and 9.18 pH buffers (in place of 7.00 and 10.01 pH buffers)Alat Laboratorium Umum

Horiba  LAQUAact PC110 K pH ORP MeterFeaturesDual channel, switchable displayAutomatic pH calibration up to 5 points using NIST, USA or Custom pH buffers0.01 pH resolutionOffset and slope displayAutomatic / manual temperature compensationTemperature calibration functionAutomatic / manual conductivity calibration up to 4 pointsAdjustable reference temperature and temperature coefficientSelectable cell constant and measurement unitResistivity, salinity, and total dissolved solids (TDS) conversions from conductivityFour TDS calibration curves for wide range of applications: EN27888, Linear, 442, NaClTwo salinity calibration curves: NaCl, Seawater Auto log dataBuilt-in memory can store up to 1000 dataAuto shut-off (programmable: 1 to 30 minutes)Auto-Hold / Auto-Stable measurementCalibration alarm (programmable: 1 to 400 days)Built-in electrode holder allows 2 electrodes to be attached on both sides of the meterLarge backlit LCD: 52mm x 64mmRS232C output for connecting the meter to a compatible printer or computerIP67-rated case: waterproof (withstand 30 mins. immersion in 1m depth of water) and dustproofPowered by 2 x AAA (LR03) or Ni-MH rechargeable batteries or power adaptorPackaged in new molded carrying case2 years meter warrantyMeter Kits Available PC110-K  Package Details:LAQUAact PC110 Dual channel pH/ORP/EC/Res/TDS/Sal/Temp handheld meter with built-in electrode holder and 2 x AAA batteries9651-10D plastic-body, gel-filled pH electrode with integrated temperature sensor9382-10D plastic-body, titanium/platinum black, conductivity probe (k=1.0) with integrated temperature sensor4.01 & 7.00 pH buffers, 1413 µS/cm, 12.88 mS/cm conductivity solutions (60ml each)Instruction manualCarrying case Alat Laboratorium Umum