ORTO ALRESA

Digtor 22 Col - CentrifugeMax. capacity: 4 x 60 ml.Max. speed: 1.801 xg / 3.000 RPMEssential tool for fat processing, where we can find the highest concentration of stem cells, for liposculpture techniques and reparative surgery.FeaturesAvailable rotors for tubes (check Digtor 22 accessories).TFT color touch screen, visible from more than 3 m.:Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).Speed programming in 10 RPM/ 10 xg stepsReal RCF values on screen based in accessories configuration.Count up/down from “0” or at “set RPM/RCF” for test reproducibility.Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.40 programmable memories, with protection under password.Several acoustic and visual messages warning the user the device situation.User friendlinessMicroprocessor controlled. PC connection.Induction motor maintenance free (brushless).Rotors and adapters list on memory.Noise level: below 60 dB.Start, stop, open lid and short spin with adjustable speed buttons.Option of free/locked adjustment of RPM/ RCF along the run.Automatic open lid, programmable.Last values remain in memory.Automatic rotor recognition. Over-speed protection.   SafetyLid provided with security systems:– Automatic lid lock system, motorized with double lock.– Emergency lid-lock release.– Locking and protection against opening along the run.– Lid dropping protection.– Port in the lid for calibration and operation checking.Unbalance detection and switch off.Protection safety ring between the centrifugation chamber and the housing.Chamber of centrifugation in stainless steel (easy cleaning).Rotors and adapters autoclavable, easy to install by the user.Forced ventilation to reduce temperature increasing.Automatic disconnection for energy saving up to 8 h., with deactivation option.Standards and DirectivesEU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.Standards: EN 61010-1,EN 61010-2-101, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.Compatible rotors:RT 302Rotor: Swing outMax. capacity: 4 x 60 ml.RPM Max.: 3.000Radius (mm): 179RCF Max. (xg): 1.801Alat Laboratorium Umum

Orto Alresa Plasma 22 - CentrifugeMax. capacity: 8 x 9/15 ml.Max. speed: 1.288 xg / 3.000 RPMPlasma concentration processes to obtain both from the fibrin net as well as that of platelets by means of PRP (platelet-rich plasma) techniques, PRF (platelet-rich fibrin) and derivatives, make the Plasma 22 centrifuge indispensable. The simplicity of these processes erroneously gives the impression that the performance of the technique is not affected by the centrifugation process. Nothing could be more mistaken; maximum performance will only be obtained with equipment that has been validated, and in which the operational parameters, beyond RPM, RCF and time, have been calculated for these processes.  The Plasma 22 centrifuge has been developed together with experts in the development of these techniques and has approval for its development.It maintains the cell structure of the phases for the application of each of the alternatives, ensuring its efficacy in the destination environment and avoiding interference of particles that impede adhesion.FeaturesLCD screen:Shows RPM and RCF, time and acceleration/deceleration (PCBS).Speed programming in 10 RPM/ 10 xg steps.Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.Timer from 1 to 99 min. programmable in 5 sec. steps and hold position.PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.16 programmable memories.Several acoustic and visual messages warning the user the device situation.Easy to useMicroprocessor controlled.Induction motor maintenance free (brushless).Rotors list on memory.Noise level: below 60 dB.Start, stop, open lid and short spin with adjustable speed buttons.Option of free/locked adjustment of RPM/ RCF along the run.Automatic open lid, programable.Last values remain in memory.Low heigh for easy access.Automatic rotor recognition. Over-speed protection.SafetyLid provided with security systems:– Automatic lid lock system, motorized– Emergency lid-lock release.– Locking and protection against opening along the run.– Lid dropping protection.– Port in the lid for calibration and operation checking.Ergonomic design that allows close the lid effortless.Unbalance detection and switch off.Protection safety ring between the centrifugation chamber and the housing.Chamber of centrifugation in stainless steel (easy cleaning).Rotors and adapters autoclavable, easy to install by the user.Automatic disconnection for energy saving up to 8 h., with deactivation option.Standards and DirectivesEU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.Standards: EN 61010-1, EN 61010-2-020, EN 61010-2-101, EN 61326-2-6,  EN 61326-1.Versions Dimensions (mm)(w x d x h)Net weight (kg)Voltage (v)Frecuency (Hz)Consumption (w)CE 15627040027019220-24050-60120CE 16527040027019110-12050-60120Compatible rotors:RT 237Rotor: Swing outMax. capacity: 8 x 9/15 ml.RPM Max.: 3.000Radius (mm): 128RCF Max. (xg): 1.288Alat Laboratorium Umum

Orto Alresa CytocentrifugeMax. capacity: 4 x 2,2 ml.Max. speed: 839 xg / 2.500 RPMThe cytocentrifuge Ortoalresa is designed for concentration of biological samples on a visible surface for the microscope and its subsequent identification and characterisation.Easy to handle, reduces the handling time, indispensable features in oncology, cytology and microbiology services. It has a swing out rotor for 4 supports, with two positions for recovery of the filtrate for a second processing in the case of low concentration samples. It can adapt rotors for tubes or plates of the Digicen 21 centrifuge.FeaturesSealed holders which prevent the leak of the sample, easy to use.Fast identification of microorganism.Allows cells detection even in low concentrated liquids.Processing time <15 min.Alarm to prevent the drying of the samples every 20 seconds.Available rotors for tubes (check Digicen 21 accessories).LCD screen:Shows RPM and RCF, time and acceleration/deceleration (PCBS).Speed programming in 10 RPM/ 10 xg steps.Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.Timer from 1 to 99 min. programmable in 5 sec. steps and hold position.PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.16 programmable memories.Several acoustic and visual messages warning the user the device situation.Easy to useMicroprocessor controlled.Induction motor maintenance free (brushless).Rotors list on memory.Noise level: below 60 dB.Start, stop, open lid and short spin with adjustable speed buttons.Option of free/locked adjustment of RPM/ RCF along the run.Automatic open lid, programable.Last values remain in memory.Low heigh for easy access.Automatic rotor recognition. Over-speed protection.SafetyLid provided with security systems:– Automatic lid lock system, motorized with double lock.– Emergency lid-lock release.– Locking and protection against opening along the run.– Lid dropping protection.– Port in the lid for calibration and operation checking.Ergonomic design that allows close the lid effortless.Unbalance detection and switch off.Protection safety ring between the centrifugation chamber and the housing.Chamber of centrifugation in stainless steel (easy cleaning).Rotors and adapters autoclavable, easy to install by the user.Forced ventilation to reduce temperature increasing.Automatic disconnection for energy saving up to 8 h., with deactivation option.Standards and DirectivesEU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.Standards: EN 61010-1, EN 61010-2-020, EN 61010-2-101, EN 61326-2-6,  EN 61326-1.Versions Dimensions (mm)(w x d x h)Net weight (kg)Voltage (v)Frecuency (Hz)Consumption (w)CE 11041053032036220-23050-60440CE 11641053032036110-12050-60420 Compatible rotors:RT 207Rotor: Swing outMax. capacity: 4 x 2,2 ml.RPM Max.: 2.500Radius (mm): 120RCF Max. (xg): 839Cytocontainers: 4Alat Laboratorium Umum

Orto Alresa Vetcen - CentrifugeMax. capacity: 6 x 1,5-2 ml.+6 x 1,5×75 mm.Max. speed: 12.716 xg /11.500 RPMSmall, compact and ideal for applications in veterinary laboratories where the number of samples is small and different types of tubes need to be processed simultaneously. It has a rotor for microtubes and capillary tubes in the same cycle.FeaturesMultitubes rotor that allows spin capillary tubes and microtubes in the same run.LED screen:Shows RPM/ RCF and time.Speed programming in 50 RPM/ 10 xg steps.Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.Timer from 1 to 99 min. programmable in 1 min. steps and hold position.Acceleration and deceleration control in 3 steps: fast, soft and free.Acoustic and visual messages on screen warning the user the equipment status.Easy to useMicroprocessor controlled.Induction motor maintenance free (brushless).Rotors list on memory.Noise level: below 60 dB.Start, stop, open lid and short spin with adjustable speed buttons.Option of free/locked adjustment of RPM/ RCF along the run.Automatic open lid, programmable.Last values remain in memory.Low heigh for easy access.Over-speed protection.SafetyLid provided with security systems:– Automatic lid lock system, motorized. Emergency lid-lock release.– Locking and protection against opening along the run.– Lid dropping protection.– Port in the lid for calibration and operation checking.Ergonomic design that allows close the lid effortless.Unbalance detection and switch off.Protection safety ring between the centrifugation chamber and the housing.Chamber of centrifugation in stainless steel (easy cleaning).Rotors and adapters autoclavable, easy to install by the user.Forced ventilation to reduce temperature increasingAutomatic disconnection for energy saving, with deactivation option.Standards and DirectivesEU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.Standards: EN 61010-1, EN 61010-2-101,  EN 61010-2-020, EN 61326-2-6,  EN 61326-1.Versions Dimensions (mm)(w x d x h)Net weight (kg)Voltage (v)Frecuency (Hz)Consumption (w)CE 16027040027016220-23050-60320CE 17727040027016110-12050-60340Compatible rotors:RT 126Rotor: Angle fixed 30ºMax. capacity: 12x1,5x75 mm.RPM Max.: 11.500Radius (mm): 86RCF Max. (xg): 12.716  RT 130Rotor: MixMax. capacity: 6x1,5x75 mm.+ 6x1,5/2 ml.RPM Max.: 11.500Radius (mm): 86RCF Max. (xg): 12.716Alat Laboratorium Umum

Digtor 22 C-8 - CentrifugeMax. capacity: 8 x 100 ml. (8/6”)Max. speed: 2.425 xg / 3.000 RPMThe largest of our centrifuges for oil, with capacity for 8 tubes of 8”, the best option for centres that carry out a large number of tests every day.FeaturesDesigned for oil/petrol applications according the standards: ASTM D 91, D96, D 893, D 1796, D2273, D2709, D 2711, D 4007, D 5546, API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07-020, DIN 51793. Fits Babcock bottlesTubes upright on rest.Gas Release System (GRS): Gas release system (optional); pre-installation included.TFT color touch screen, visible from more than 3 m.:Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalancing location system (ULS).Speed programming in 10 RPM/10 xg steps.Real RCF values on screen based in accessories configuration.Count up/down from “0” or at “set RPM/RCF” for test reproducibility.Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.40 programmable memories, with protection under password.Several acoustic and visual messages warning the user the device situation.User friendlinessMicroprocessor controlled. PC connection.Induction motor maintenance free (brushless).Rotors and adapters list on memory.Noise level: below 60 dB.Start, stop, open lid and short spin with adjustable speed buttons.Option of free/locked adjustment of RPM/ RCF along the run.Last values remain in memory.Automatic rotor recognition. Over-speed protection.SafetyLid provided with security systems:– Automatic lid lock system, motorized with double lock.– Emergency lid-lock release.– Locking and protection against opening along the run.– Lid dropping protection.– Port in the lid for calibration and operation checking.Unbalance detection and switch off.Protection safety ring between the centrifugation chamber and the housing.Chamber of centrifugation in stainless steel (easy cleaning).Rotors and adapters autoclavable, easy to install by the user.Automatic disconnection for energy saving up to 8 h.HeatingPreheating program with rotor spinning and temperature selectable. Allows keep the chamber at working temperature before starting the process.Regulation of the room temperature +5°C (41°F) to 80°C (176°F) in 1°C/1° F steps Programmable in °C o °F.Temperature sensor inside the chamber. Overheating protection.   Internal isolated avoiding heat lost.Standards and DirectivesEU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6, EN 61326-1, EN 61010-2-010.Versions Dimensions (mm)(w x d x h)Net weight(kg)Voltage (v)Frecuency (Hz)Consumption (w)CE 24053064042077220-23050-601260CE 24153064042077110-12050-601220 Compatible rotors:RT 294Rotor: Swing outMax. capacity: 8 x 100 ml. (8/6”)RPM: 2.000Radius (mm): 239RCF Max. (xg): 1.069  RT 293Rotor: Swing outMax. capacity: 4 x 100 ml. (8/6”)RPM Max.: 3.000Radius (mm): 241RCF Max. (xg): 2.425  RT 289Rotor: Swing outMax. capacity: 4 x 100 ml. (8”)RPM Max.: 3.000Radius (mm): 241RCF Max. (xg): 2.425Alat Laboratorium Umum

Orto Alresa Digtor 22 C-U - Centrifuge Max. capacity: 4 x 100 ml. (8/6”)Max. speed: 2.425 xg / 3.000 RPMThe most affordable option in the range of centrifuges for oil laboratories that, due to regulations, do not need heating. It has the same accessories as the heated models, all of them are especially designed for working with oily substances as well as the reagents used in regulations applicable with oil.Effective, quick, versatile, allowing you to work with 6” and 8” conical profile tubes, pear type tubes and “finger” type tubes for small volumes. It has a pre-installation for incorporating a gas release system at any time during the life of the equipment.FeaturesDesigned for oil/petrol applications according the standards: ASTM D 91, D 893, D 2273, D 2709, D 5546, API 2542, API 2548, BS 4385, DIN 51793.Tubes upright on rest.Gas Release System (GRS): Gas release system (optional); pre-installation included.TFT color touch screen, visible from more than 3 m.:Shows RPM and RCF, time, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).Speed programming in 10 RPM/10 xg steps.Real RCF values on screen based in accessories configuration.Count up/down from “0” or at “set RPM/RCF” for test reproducibility.Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.40 programmable memories, with protection under password.Several acoustic and visual messages warning the user the device situation.User friendlinessMicroprocessor controlled. PC connection.Induction motor maintenance free (brushless).Rotors and adapters list on memory.Noise level: below 60 dB.Start, stop, open lid and short spin with adjustable speed buttons.Option of free/locked adjustment of RPM/ RCF along the run.Automatic open lid, programmableLast values remain in memory.Automatic rotor recognition. Over-speed protection.SafetyLid provided with security systems:– Automatic lid lock system, motorized with double lock.– Emergency lid-lock release.– Locking and protection against opening along the run.– Lid dropping protection.– Port in the lid for calibration and operation checking.Unbalance detection and switch off.Protection safety ring between the centrifugation chamber and the housing.Chamber of centrifugation in stainless steel (easy cleaning).Rotors and adapters autoclavable, easy to install by the user.Forced ventilation to reduce temperature increasing.Automatic disconnection for energy saving up to 8 h., with deactivation option.Standards and DirectivesEU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6,  EN 61326-1.Versions Dimensions (mm)(w x d x h)Net weight(kg)Voltage (v)Frecuency (Hz)Consumption (w)CE 24253064040073220-24050-60440CE 24353064040073110-12050-60460Compatible rotors:RT 293Rotor: Swing outMax. capacity: 4 x 100 ml. (8/6”)RPM Max.: 3.000Radius (mm): 241RCF Max. (xg): 2.425  RT 289Rotor: Swing outMax. capacity: 4 x 100 ml. (8”)RPM Max.: 3.000Radius (mm): 241RCF Max. (xg): 2.425Alat Laboratorium Umum

Orto Alresa Digtor 22 C - CentrifugeMax. capacity: 4 x 100 ml. (8/6”)Max. speed: 2.425 xg / 3.000 RPMWith capacity for 4 tubes of 8”, 6”, trace and 28 “finger” tubes. Versatile and effective is the better option of all the centrifuges for oil applications.FeaturesDesigned for oil/petrol applications according the standards: ASTM D 91, D96, D 893, D 1796, D2273, D2709, D 2711, D 4007, D 5546, API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07-020, DIN 51793. Fits Babcock bottles.Tubes upright on rest.Gas Release System (GRS): Gas release system (optional); pre-installation included.TFT color touch screen, visible from more than 3 m.:Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS and unbalancing location system (ULS).Speed programming in 10 RPM/10 xg steps.Real RCF values on screen based in accessories configuration.Count up/down from “0” or at “set RPM/RCF” for test reproducibility.Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.40 programmable memories, with protection under password.Several acoustic and visual messages warning the user the device situation.User friendlinessMicroprocessor controlled. PC connection.Induction motor maintenance free (brushless).Rotors and adapters list on memory.Noise level: below 60 dB.Start, stop, open lid and short spin with adjustable speed buttons.Option of free/locked adjustment of RPM/ RCF along the run.Last values remain in memory.Automatic rotor recognition. Over-speed protection.SafetyLid provided with security systems:– Automatic lid lock system, motorized with double lock.– Emergency lid-lock release.– Locking and protection against opening along the run.– Lid dropping protection.– Port in the lid for calibration and operation checking.Unbalance detection and switch off.Protection safety ring between the centrifugation chamber and the housing.Chamber of centrifugation in stainless steel (easy cleaning).Rotors and adapters autoclavable, easy to install by the user.Automatic disconnection for energy saving up to 8 h.HeatingPreheating program with rotor spinning and temperature selectable. Allows keep the chamber at working temperature before starting the process.Regulation of the room temperature +5°C (41°F) to 80°C (176°F) in 1°C/1°F steps Programmable in °C o °F.Temperature sensor inside the chamber. Overheating protection.   Internal isolated avoiding heat lost.Standards and DirectivesEU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6, EN 61326-1, EN 61010-2-010.Versions Dimensions (mm)(w x d x h)Net weight(kg)Voltage (v)Frecuency (Hz)Consumption (w)CE 23853064040076220-23050-601260CE 23953064040076110-12050-601220Compatible rotors:RT 293Rotor: Swing outMax. capacity: 4 x 100 ml. (8/6”)RPM Max.: 3.000Radius (mm): 241RCF Max. (xg): 2.425 RT 289Rotor: Swing outMax. capacity: 4 x 100 ml. (8”)RPM Max.: 3.000Radius (mm): 241RCF Max. (xg): 2.425 Alat Laboratorium Umum

Orto Alresa Lacter 21Max. capacity: 12 ButyrometersMax. speed: 398 xg / 1.600 RPMThe centrifuge Lacter has been designed for handling of dairy products as milk, cheese, cream, yogurt and its derivate easily and rely on.Its design allows it to process Gerber or solubility tubes. It has 16 programs that allow to store the parameters to analyse samples of different types of animals reducing the processing time.Smoothness operation prolongs the tubes life and prevents its breakage. Simultaneous and automatic conversion of RPM/FCR values eliminates additional calculations and the heating system ensures temperature traceability throughout the process.FeaturesHeated: working temperature up to 80 °C (176 °F).LCD screen:Shows RPM and RCF, time, temperature and acceleration/deceleration (PCBS).Speed programming in 10 RPM/ 10 xg steps.Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.Timer from 1 to 99 min. programmable in 5 sec. steps and hold position.PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.16 programmable memories.Several acoustic and visual messages warning the user the device situation.Easy to useMicroprocessor controlled.Induction motor maintenance free (brushless).Rotors list on memory.Noise level: below 60 dB.Start, stop, open lid and short spin with adjustable speed buttons.Option of free/locked adjustment of RPM/ RCF along the run.Last values remain in memory.Low heigh for easy acces.Automatic rotor recognition. Over-speed protection.   SafetyLid provided with security systems:– Automatic lid lock system, motorized with double lock.– Emergency lid-lock release.– Locking and protection against opening along the run.– Lid dropping protection.– Port in the lid for calibration and operation checking.Ergonomic design that allows close the lid effortless.Unbalance detection and switch off.Protection safety ring between the centrifugation chamber and the housing.Chamber of centrifugation in stainless steel (easy cleaning).Rotors and adapters autoclavable, easy to install by the user.Automatic disconnection for energy saving up to 8 h.HeatingPreheating program with rotor spinning and temperature selectable. Allows keep the chamber at working temperature before starting the process. • Regulation of the room temperature +5°C (41°F) to 80°C (176°F) in 1°C/1°F steps. Programmable in °C o °F.Temperature sensor inside the chamber. Overheating protection.Internal isolated avoiding heat lost.Standards and DirectivesEU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.Standards: EN 61010-1, EN 61010-2-101, EN 61010-2-020, EN 61326-2-6,  EN 61326-1, EN 61010-2-010.Versions Dimensions (mm)(w x d x h)Net weight (kg)Voltage (v)Frecuency (Hz)Consumption (w)HeatedCE 15841052038041220-23050-60500YesCE 15941052038041110-12050-60480YesCompatible rotors:RT 240Rotor: Angle fixed 20ºMax. capacity: 8 butyrometersRPM Max.: 1.600Radius (mm): 139RCF Max. (xg): 398  RT 241Rotor: Angle fixed 20ºMax. capacity: 12 butyrometersRPM Max.: 1.600Radius (mm): 139RCF Max. (xg): 398 Alat Laboratorium Umum