phone Phone

CV. Andalan Prima Sejahtera

Jenco 3676 pH/ORP Controller/Transmitter
Hover to Zoom

Jual Jenco 3676 pH/ORP Controller/Transmitter

Spesifikasi Jenco 3676 pH/ORP Controller/Transmitter

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

  • Isolated 4 to 20 mA output
  • Dual on/off relays
  • Large led display
  • ATC
  • 115VAC /230VAC operations
  • Compact 1/4 DIN case
  • Low power solid state design
  • Front panel output current span adjustable control
  • Front panel acid/base influent select switch
  • Front panel high/low relay format select switch



pH Range

0 to 14.00 pH

pH Resolution

0.01 pH

pH Accuracy

±0.05 pH

ORP Range

-1999 to 1999 mV

ORP Resolution

1 mV

ORP Accuracy

±0.5% F.S.

Current output

Isolated 4~20 mA

Isolation Voltage

500 VDC max

Load Resistance

500 ohm max

Current Output pH/ORP

0.00~14.00 pH / 0 ~ 1400 mV

Relays Output (Max)

5amp. at 115 VAC, 2.5 amp. at 230 VAC, resistive load

Relay Hysteresis pH/ORP

±0.1 pH / ±10 mV

Input Impedance

>1012 ohms

Temperature Compensation

Auto 0 to 100 °C


12.7 mm high LCD

Operating Temperature

0 to 40 °C

Power Source

115/230 VAC ±15%,50/60 Hz


96mm x 96mm x 119.3mm


770 g


PH Meter

Untuk keterangan lebih lanjut, silahkan download PDF ini :