phone Phone
+6281290773137
close
menu

CV. Andalan Prima Sejahtera

sql
Rigol DG1022Z 25 MHz Arbitrary Function Generator with Second Channel
Hover to Zoom

Jual Rigol DG1022Z 25 MHz Arbitrary Function Generator with Second Channel



Spesifikasi Rigol DG1022Z 25 MHz Arbitrary Function Generator with Second Channel

Rigol DG1022Z 25 MHz Arbitrary Function Generator with Second Channel

  • DG1022Z 25 MHz Arbitrary Function Generator with second channel
  • SiFi (Signal Fidelity) for 100% waveform replication
  • 2Mpts or 8Mpts/CH(std.), 16Mpts/CH (opt.) arbitrary waveform length 
  • Standard 2 full functional independent channels
  • ±1ppm frequency stability, -125dBc/Hz phase noise, 200ps low jitter
  • Built-in 8 orders harmonics generator
  • Built-in 7 digits/s counter up to 200MHz
  • 160 built-in pre-edited waveforms 
  • Intuitive arbitrary waveform editing software
  • Full modulation supported: AM, FM, PM, ASK, FSK, PSK and PWM
ModelDG1022ZDG1032ZDG1062Z
Channel222
Maximum Frequency25MHz30MHz60MHz
Sample Rate200MSa/s
Waveforms
Basic waveformsSine, Square, Ramp, Pulse, Noise
Built-in Arbitrary
Waveforms
160 kinds, including Sinc, Exponential Rise, Exponential
Fall, ECG, Gauss, HaverSine, Lorentz, Dual-Tone, etc.
Frequency Characteristics
Sine1µHz to 25MHz1µHz to 30MHz1µHz to 60MHz
Square1µHz to 25MHz1µHz to 25MHz1µHz to 25MHz
Ramp1µHz to 500kHz1µHz to 500kHz1µHz to 1MHz
Pulse1µHz to 15MHz1µHz to 15MHz1µHz to 25MHz
Harmonic1µHz to 10MHz1µHz to 10MHz1µHz to 20MHz
Noise (-3dB)25MHz
bandwidth
30MHz
bandwidth
60MHz
bandwidth
Arbitrary Waveform1µHz 10MHz1µHz to 10MHz1µHz to 20MHz
Resolution1µHz
Accuracy±1ppm of the settings, 18°C to 28°C
Sine Wave Spectrum Purity
Harmonic DistortionTypical (0dBm)
DC-10MHz (included): <-65dBc
10MHz-30MHz (included): <-55dBc
30MHz-60MHz (included): <-50dBc

Total Harmonic

Distortion

<0.075% (10Hz-20kHz, 0dBm)
Spurious
(non-harmonic)
Typical (0dBm)
≤10MHz: <-70dBc
>10MHz: <-70dBc+6dB/octave
Phase NoiseTypical (0dBm, 10kHz deviation)
10MHz: <-125dBc/Hz
Signal Characteristics
Square
Rise/Fall TimeTypical (1Vpp)
<10ns
OvershootTypical (100KHz, 1Vpp)
≤5%
Duty Cycle0.01% to 99.99%
(limited by the current frequency setting)
Non-symmetry1% of period+5ns
Jitter (rms)Typical (1MHz, 1Vpp, 50O)
≤5MHz: 2ppm+200 ps
>5MHz: 200ps
Ramp
Linearity≤51% of peak output
(typical, 1kHz, 1Vpp, 100% Symmetry)
Symmetry0% to 100%
Pulse
Pulse Width16ns to 999.999 982 118ks
(limited by the current frequency setting)
Duty Cycle0.001% to 99.999%
(limited by the current frequency setting)
Leading/Trailing
Edge Time
≥10ns
(limited by the current frequency and pulse width settings)
OvershootTypical (1Vpp)
≤5%
Jitter (rms)Typical (1Vpp)
≤5MHz: 2ppm+200ps
>5MHz: 200ps
Arb
Waveform Length8pts to 2Mpts (16Mpts optional)
8pts to 8Mpts (16Mpts optional)
Vertical Resolution14bits
Sample Rate200MSa/s
Minimum Rise/Fall
Time
Typical (1Vpp)
<10ns
Jitter (rms) 
 Typical (1Vpp)
≤5MHz: 2ppm+200ps
>5MHz: 200ps
Edit MethodEdit Points, Edit Block, Insert Waveform
Harmonic
Harmonic Order≤8
Harmonic TypeEven, Odd, All, User
Harmonic Amplitudecan be set for all harmonics
Harmonic Phasecan be set for all harmonics
Output Characteristics
Amplitude (into 50 Ω)
Range≤10MHz: 1.0mVpp to 10Vpp
≤30MHz: 1.0mVpp to 5.0Vpp
≤60MHz: 1.0mVpp to 2.5Vpp
AccuracyTypical (1kHz Sine, 0V Offset, >10mVpp, Auto)
±1% of setting ± 1mV
FlatnessTypical (Sine 2.5Vpp)
≤10MHz: ±0.1dB
≤60MHz: ±0.2dB
UnitsVpp, Vrms, dBm
Resolution0.1mVpp or 4digits
Offset (into 50 Ω)
Range (Peak ac+dc)±5Vpk ac+dc
Accuracy±(1% of setting+5mV+0.5% of amplitude)
Waveform Output
Impedance50Ω (typical)
ProtectionShort-circuit protection, automatically disable waveform
output when overload occurs
Modulation Characteristics
Modulation TypeAM, FM, PM, ASK, FSK, PSK, PWM
AM
Carrier WaveformSine, Square, Ramp, Arb (except DC)
SourceInternal/External
Modulating WaveformSine, Square, Ramp, Noise, Arb
Depth0% to 120%
Modulating Frequency2mHz to 1MHz
FM
Carrier WaveformSine, Square, Ramp, Arb (except DC)
SourceInternal/External
Modulating WaveformSine, Square, Ramp, Noise, Arb
Modulating Frequency2mHz to 1MHz
PM
Carrier WaveformSine, Square, Ramp, Arb (except DC)
SourceInternal/External
Modulating WaveformSine, Square, Ramp, Noise, Arb
Phase Deviation0° to 360°
Modulating Frequency2mHz to 1MHz
ASK
Carrier WaveformSine, Square, Ramp, Arb (except DC)
SourceInternal/External
Modulating WaveformSquare with 50% duty cycle
Key Frequency2mHz to 1MHz
FSK
Carrier WaveformSine, Square, Ramp, Arb (except DC)
SourceInternal/External
Modulating WaveformSquare with 50% duty cycle
Key Frequency2mHz to 1MHz
PSK
Carrier WaveformSine, Square, Ramp, Arb (except DC)
SourceInternal/External
Modulating WaveformSquare with 50% duty cycle
Key Frequency2mHz to 1MHz
PWM
Carrier WaveformPulse
SourceInternal/External
Modulating
Waveforms
Sine, Square, Ramp, Noise, Arb
Width Deviation0% to 100% of Pulse Width
Modulating Frequency2mHz to 1MHz
[Mod/Trig/FSK/Sync] Input
Input Range75mVRMS to ±5Vac+dc
Input Bandwidth 50kHz
Input Impedance10kΩ
Burst Characteristics
Carrier WaveformSine, Square, Ramp, Pulse, Noise, Arb (except DC)
Carrier Frequency2mHz to 25MHz2mHz to 30MHz2mHz to 60MHz
Burst Count1 to 1,000,000 or Infinite
Start/Stop Phase0° to 360°, 0.1° resolution
Internal Period1µs to 500s
Gated SourceExternal Trigger
Trigger SourceInternal, External or Manual
Trigger Delay0ns to 100s
Sweep Characteristics
Carrier WaveformSine, Square, Ramp, Arb (except DC)
TypeLinear, Log or Step
DirectionUp/Down
Start/Stop FrequencyConsistent with the upper/lower limit of the frequency of
the carrier waveform
Sweep Time1ms to 500s
Hold/Return Time0ms to 500s
Trigger SourceInternal, External or Manual
MarkFalling edge of the Sync signal (programmable)
Counter
FunctionFrequency, Period, Positive/Negative Pulse Width,
Duty Cycle
Frequency Resolution7 digits/second (Gate Time =1s)
Frequency Range1µHz to 200MHz
Period MeasurementMeasurement Range5ns to 16 days
Voltage Range and Sensitivity (Not modulation signal)
DC CouplingDC Offset Range±1.5Vdc
1µHz to 100MHz50mVRMS to ±2.5Vac+dc
100MHz to 200MHz100mVRMS to ±2.5Vac+dc
AC Coupling1µHz to 100MHz50mVRMS to ±2.5Vpp
100MHz to 200MHz100mVRMS to ±2.5Vpp
Pulse Width and Duty Cycle Measurement
Frequency/Amplitude
Range
1µHz to 25MHz50mVRMS to
±2.5Vac+dc
DC Coupling
Pulse WidthMinimum≥20ns
Resolution5ns
Duty CycleRange (Display)0% to 100%
Input Characteristics
Input Signal RangeBreakdown Voltage±7Vac+dcImpedance=
1MΩ
Input AdjustmentCouplingACDC
HF SuppressionON: input bandwidth=250kHz;
OFF: input bandwidth=200MHz
Input TriggerTrigger Level Range-2.5V to +2.5V>
Trigger Sensitivity
Range
0% (about 140mV hysteresis
voltage) to 100% (about 2mV
hysteresis voltage)
Gate TimeGateTime11.310ms
GateTime210.48ms
GateTime3166.7ms
GateTime41.342s
GateTime510.73s
GateTime6>10s
Trigger Characteristics
Trigger Input
LevelTTL-compatible
SlopeRising or falling (optional)
Pulse Width>100ns
LatencySweep: <100ns (typical)
Burst: <300ns (typical)
Trigger Output
LevelTTL-compatible
Pulse Width>60ns (typical)
Maximum Frequency1MHz
Two-channel Characteristics - Phase Offset
Range0° to 360°
Waveform Phase
Resolution
0.03°
Clock Reference
External Reference Input
Lock Range10MHz±50Hz
Level250mVpp to 5Vpp
Lock Time<2s
Impedance (typical)1kΩ , AC coupling
Internal Reference Output
Frequency10MHz±50Hz
Level3.3Vpp
Impedance (typical)50Ω, AC coupling
Sync Output
LevelTTL-compatible
Impedance50Ω, nominal value
Overvoltage Protection
Overvoltage protection will take effect once any of the following two conditions is
met:
• The amplitude setting in the generator is greater than 2Vpp or the output
offset is greater than |2V DC |, the input voltage is greater than
±11.5×(1±5%)V (<10kHz).
• The amplitude setting in the generator is lower than or equal to 2Vpp or the
output offset is lower than or equal to |2V DC |, the input voltage is greater than
±3.5×(1±5%)V (<10kHz).
General Specifications
Power
Power Voltage100V to 240V (45Hz to 440Hz)
Power ConsumptionLess than 40W
Fuse250V, T3.15A
Display
Type3-inch TFT LCD
Resolution320 Horizontal×RGB×240 Vertical Resolution
Color16M color
Environment
Temperature RangeOperating: 0ºC to 50ºC
Non-Operating: -40ºC to 70ºC
Cooling MethodCooling by fans compulsively
Humidity RangeLess than 30ºC: ≤95% Relative Humidity (RH)
30ºC to 40ºC: ≤75% Relative Humidity (RH)
40ºCto 50ºC: ≤45% Relative Humidity (RH)
AltitudeOperating: Less than 3000 meters
Non-Operating: Less than 15,000 meters
Mechanical
Dimensions
(W×H×D)
261.5mm×112mm×318.4mm
Weightwithout package: 3.2kg
with package: 4.5kg
InterfacesUSB Host, USB Device, LAN
IP ProtectionIP2X
Calibration
Interval
Recommend calibration interval is one year

Tech Specs

Generators / Counters/Function Generator Template

Channels2
Frequency Maximum25 MHz
Frequency Minimum1 uHz (0.000001 Hz)
FunctionsBurst, Noise, Pulse, Ramp, Sine, Square, Sweep, Triangle
Max Amplitude Vpp @ 50 ohms10 V
ArbitraryYes
Sample Rate250 MSa/S
Screen TypeLCD
Color ScreenYes
TriggeringYes
Counter that displays frequency on screen.Yes
Modulation TypesAM, FM, FSK, PSK, PWM
Graphical DisplayYes
Memory2 MB (2048 kB)

 

Pengukur Elektronik Lainnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :