Spesifikasi Stuart SI60 - Incubator-Total Visibility-Analog 230V
Stuart SI60 - Incubator, Total Visibility, Analog, 230V
- SI60 Incubator, Total Visibility, Analog, 230v
- Full visibility of samples
- Easy access to working chamber
- Many applications:
- Plant propagation
- Humidity tests
- Simulation of tropical conditions
- Incubation of complete instruments
- Choice of analogue or digital control
Constructed from clear Acrylic® polymer to give total visibility of samples at all times. Designed for easy access with hinged front door panel. Each side panel has 2 x 10mm diameter plugged holes for the introduction of either gases or cables. The incubator does not have a base so that it can be placed directly over complete instruments (base is available as an accessory). Forced air circulation and electronic temperature control ensure accurately maintained conditions.
For analogue model SI60, setting the temperature is via a calibrated knob. For digital model SI60D, setting the temperature is more accurately achieved via the LCD display. The latter also gives a constant reading of actual temperature. Both models have a push switch pre-set at 37°C. Additionally there is a temperature safety cut-out set at 72°C.
Stuart SI60 Specification
Temperature range Ambient +5ºC to 60ºC
Temperature fluctuation at 37ºC ±0.1ºC
Temp. variation between shelves ±0.3ºC
Nominal volume 60 litres
Internal dimensions, mm (w x d x h) 450 x 380 x 380
Overall dimensions, mm (w x d x h) 600 x 390 x 390
Net weight, kg 11.2
Electrical supply 230V, 50Hz, 350W
IP Rating 30
Tech Specs
Incubators
- Controls (Life Science) Analog
- Capacity (Incubator/Oven/Chamber) 60 L
- Voltage (Life Science) 208-240 VAC Only
- Max Temp (Incubator/Oven/Chamber) 60 C
- Min Temp (Incubator/Oven/Chamber) 5 C
Inkubator Laboratorium