SCHALLER

Humimeter PMP moisture meter for determination of absolute water content at the pileApplicationFor receiving control of paper processors like printing houses, paper retailers and corrugated paper manufacturers.Measuring instrument for determination of absolute water content of paper and solid cardboard at the pile.FeaturesMeasuring range 1% to 15% water content, depending on the materialResolution: 0.1% water contentMeasuring depth: 20 mmPaper temperature: 0 to +50°C / 32 to 122°FTemperature can be set to °C or °F as requiredAutomatic temperature compensationMeasurement within seconds without prior treatment of samplesHold function, automatic datalog and manual saving of results forup to 10,000 logs with measuring point reportLarge, well-lit LC displayDimensions: 147 x 75 x 30 mm (incl. rubber protection), weight  265 g (incl. batteries)Scope of supply: humimeter PMP with rubber protection cover, wooden case, proof plate and batteriesYour benefitQuick and highly accurate measurement using a non-destructive method   Simple handlingSmall, handy, applicable everywhere on siteMenu languages in English, German, Italian, French, Spanish, Russian, Portuguese, Czech and Polish. Art.No: 13770 humimeter PMPPaper moisture meter for determination of absolute water content at the pileAccessories and ExtensionArt. No.PictureAccessory / Extension12297 Entry of an existing characteristic curve in a FS_3 or humimeter device11217 Laboratory analysis testing for new material of our  humimeter devices12278humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC11733Thermo printer runs by battery, industrial model, portable10600 Factory calibration certificate. Protocol documenting the calibration of material moisture meters before deliveryAlat Laboratorium Umum

Humimeter RP6  Moisture Meter for Waste Paper BalesApplicationMoisture meter for the determination of moisture in waste paper / recycling paper and for the detection of moisture spots in recycling paper bales.Measurement of compressed bales, roles and pulp possible. Measuring range of 1 to 50% water content, measuring depth 500mm. Furthermore it is possible to connect external sensors to the humimeter RP6.Use the optionally available humidity and temperature sensor to measure environmental parameters and many other important paper key figures quickly and efficiently. To measure loose paper or cardboard, use the optionally available 0.3 meter long insertion probe. FeaturesMeasuring range: 1 to 50% water content (depending on the material)Resolution: 0.5% water contentMeasuring depth: max. 500mmOperation temperature: 0 to +50°C / 32 to 122°FAutomatic temperature compensationTemperature can be set to °C und °F as requiredMeasurement within seconds without prior treatment of samplesHold function, automatic datalog for up to 10,000 logs with measuring point reportInterface for the connection of further external sensorsMenu languages: English, German, Italian, French, Spanish, Russian, many others on requestProtection class: IP64Scope of supply: humimeter RP6, humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC, rechargeable batteries (Li-Ion 1950mAh) and plastic caseOptional: portable thermo printer,  humidity and temperature sensor, test medium Your benefitQuickly and highly accurate measurement using a non-destructive methodDigital displaying in “%” water content (weight percentage)Simple handling of moisture meterPre-programmed calibration for different materials and bale densitiesHandy, applicable everywhere on siteMenu languages: English, German, Italian, French, Spanish, Russian and many others on requestArt.Nr.: 13300 humimeter RP6 moisture meter for recycling paper / waste paperExtended accessoriesArt. No.PictureExtended accessories11733Thermo printer runs by battery, industrial model, portable13340 Internal Bluetooth class 1, integrated module class 1 (up to 100 metres) for humimeter devices. Combinable with USB interface.13837Insertion probe with stainless steel probe of 0.3 meter length for recycling paper and corrugated board12004LF_TB 120 Precision moisture and temperature plug-in sensor for material moisture, sensor head 0.3 m stainless tube with steel sinter cap and 2 meter connection cable.Relative humidity 0 to 100%, calibration 10 to 90% r.h. +/- 1.5% r.h. (at 23°C), temperature range -20 to +100°C, calibration +/- 0.3°C (at 235°C), rapid conditioning10726 Test medium for humimeter RP6 moisture meter for recycling paper10600 Test plate in wooden case for additional checking of humimeter RP6 (additionally to standard check via air value)Measuring procedureStart your humimeter RP6 by pushing the black button on the handle of the device. Choose the right calibration curve (e.g. 350 recycling paper) and press the measuring plate against the waste paper bale. The display immediately shows the water content and temperature. Now additional information like supplier’s data and notes can be added. The measuring values can be stored at the humimeter RP6 and sent to a PC if required. Furthermore the measuring results can be printed out on the spot via the optionally available portable thermo printer. For the determination of many other relevant process parameters, a humidity and temperature sensor can be connected.Alat Laboratorium Umum

PMCS Paper Moisture Sensor - Online Measurement for Paper WebsFeaturesAbsolute moisture measurementMeasurement range: 3 to 20% moistureMeasurement system: dielectricGrammage range: 80 to 1200 g/m² (lower/higher on inquiry)Paper temperature: 10 to 45°C (higher on inquiry) or 50 to 113 °F (higher on inquiry)Ambient temperature: 10 to 45°C (higher on inquiry) or 50 to 113 °F (higher on inquiry)Relative moisture measurementMeasurement range: 0 to 100% r.h.Ambient temperature: 10 to 45°C (higher on inquiry) or 50 to 113 °F (higher on inquiry)Paper temperature measurementMeasurement range: 0 to 200°C or 32 to 392°FMeasurement system: infrared (non-contact)Ambient temperature: 10 to 45 °C (higher on inquiry) or 50 to 113 °F (higher on inquiry)Your benefitDue to the fact that the sensor is movable, it is possible to measure the moisture-characteristics cross- and lengthwise of the paper rollCompact device design, ideal for installations in existing constructionsRolls bring the paper or paperboard close to the non-contact paper moisture sensorIncoming goods inspection of paperSpecial developed PC software for recording and analyzing measurementsAlat Laboratorium Umum

PMSA At-line moisture analyser for determination of water content of single paper sheetsApplicationAt-line moisture analyser with PC software for determination of water content of single paper sheets The PMSA is a laboratory instrument for the determination of absolute water content of single paper sheets. Contrary to the traditional kiln-drying method,  the PMSA paper moisture analyser determines the water content within a few seconds. The PMSA can be used for analysing samples taken directly from the paper machine as well as for the incoming and exit control of paper sheets. The analysis of the measuring results is effected on the PC – the intuitive software provides a user-friendly interface for the  display of measuring values, calibration of further paper types and the management of measuring data. The state-of-the-art and long-term stable sensor technology guarantees precise measuring values and extremely high repeat accuracy. To ensure a maximum of accuracy, the system performs a self-calibration of the sensor before each measurement. FeaturesMeasuring range: 1 to 20 % absolute water contentResolution: 0.01%Grammage range: 30 to 800 g/m²Maximum paper thickness: 0.8 mm (higher range on request)Automatic temperature compensationMinimum paper size: 180 x 180 mmTemperature range: 0 to +50 °C / 32 to 122 °FProtection class: IP30Dimensions: 274 x 202 x 128 mmPC software in English and GermanPower supply and connection to PC: 5VDC (USB mini B connector)Scope of supply: PMSA moisture sensor incl. PMSA software on USB flash drive and USB cablePC not includedOptional: weight scale for paperYour benefitsMeasurement within secondsNon-destructive measurementSimple handlingFor all types of paper sheetsLong-term stable sensor technologyInfrared temperature measurement (temperature compensated) Art.No.: 13600 PMSA Single paper sheet moisture sensorRequired special software for display of measuring value, type calibration and measuring data management includedExtended accessoriesArt. No.Extended accessories12493paper grammage precision scale 240g / 0.001g; with PC interface incl. datalink13762Laboratory analysis for creation of calibration curve for PMSAMeasuring procedure / handlingAfter installing the PMSA software on your PC, connect the PMSA moisture sensor to the PC via USB cable. Select the paper type to measure in the software and click the start button. To ensure a maximum of accuracy, the system performs a self-calibration of the sensor before each measurement – this only takes several seconds.When the self-calibration is completed, insert the paper sheet to measure. After a few seconds the determined water content is shown on the screen. Now additional data like a batch number can be added and the measuring values can be saved in a database. The measuring data can also be exported (csv, html, xls) or printed out. Via the software, further paper types can be created and calibrated easily.Alat Laboratorium Umum

Climatic chamber with monitoring and measuring system for moistureFeatures:Analysis system for LF moisture transmitterDisplay shows moisture and target valueControl range: 10 to 90% r.h.Resolution and setting step: 0.1% r.h.Power supply:  220 VoltOptional available with interface and date recording softwareYour benefitVery quick balancingChamber large volumeSimple handlingLarge viewing windowSamples can be individually suspendedarticle no. 11134Alat Laboratorium Umum

Applicationhumimeter RH6 paper hygrometerPaper moisture meter with sword sensor for piles of paper. Temperature compensated paper and wood equilibrium moisture content, calibration curves for determination of water content. With PC-interface, software, wooden case and batteries.FeaturesRelative air humidity 0 to 100%, resolution 0.1% rhCalibration 10 to 90% ±1.5% rh (at 25°C)Temperature can be set to °C or °F as requiredTemperature -10 to +60°C, resolution 0.1°C, 14 to 140°FCalibration ±0.3°C (at 25°C)Dew point -55 to +60°C, resolution 0.1°C, -67 to 140°FAbsolute air humidity 0 to 130 g/m³, resolution 0.1g/m³Customer calibration functionHold function, manual saving of resultsOnline functionAutomatic datalog for up to 10,000 logs with measuring point report, suppliers´ data can be recordedSword sensor length 30 cmScope of supply: humimeter RH6 with rubber protection cover, humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC, wooden case and batteriesOptional: printer     Your benefitTemperature compensated paper and wood equilibrium moisture content, calibration curves for determination of water contentRapid adjustmentA new and revolutionary powerful portable measuring instrument series for measuring using innovative sensor technologyEasy data storage at the portable moisture meterOptimal documentation of your qualityMenu languages: English, German, Italian, French, Spanish, Russian and many others on requestArt. No.: 11497Extended accessoriesArt. No.PictureExtended accessories12627Bluetooth data communication module for all humimeter devices with serial interface RS232 11733Thermo printer runs by battery, industrial model, portable10072Calibration equipment for device with sword sensor for piles of paper10352Certified calibration ampoules - set of 5, 50% r.h. 10005Certified calibration ampoules - set of 5. 2 x 35% r.h., 1 x 50% r.h.,  2 x 80% r.h.10451Sword sensor holder for humimeter RH5 and RH610523Tool for removing sword sensor holder. For humimeter RH5 and rh6. Made of steel with wooden handle10403 Factory calibration certificate Protokol documenting the adjustment at delivery for air humidity meters.11131 Checking the calibration of FS_3 series devices, RH and LF seriesThe humimeter RH6 paper hygrometer is a powerful moisture tester with sword probe (see picture) for humidity measurement in paper stacks.  To determine humidity, the sword sensor only has to be inserted into the paper stack and left there for a short conditioning time.   Via the integrated datalog the measuring values can be stored on the humimeter RH6 paper hygrometer and additional data can be added. You also have the possibility to use the Autolog function. This function automatically saves measuring values in adjustable time intervals.  In order to prevent a damage of the sword sensor when using the humimeter RH6 paper hygrometer in heavy paper stacks, a sword sensor holder and a tool for removing the sword sensor holder are available optionally. Before inserting the humimeter RH6 paper hygrometer, the sword sensor holder is driven in the paper stack and enables a measurement without any falsification of the measuring value. For an easy removal of the sword sensor holder after drawing out the humimeter RH6 paper hygrometer, the tool for removing the sword sensor holder is used. Simultaneously, the humimeter RH6 paper hygrometer also measures the material temperature and includes it in the calculation of the measuring result. The temperature range goes from -10 °C to +60 °C and can be set to °C or °F as required.The calibrated measuring range of our humimeter RH6 paper hygrometer goes from 10 % to 100 % relative air humidity. Using the sword sensor in a paper stack, the air humidity equates to the paper moisture. Naturally, the humimeter RH6 paper hygrometer is also suited for determining the air humidity in a room.If required, the humimeter RH6 paper hygrometer can also determine the absolute air humidity or dew point temperature at the top of the sword sensor.A further feature of the humimeter RH6 paper hygrometer is its integrated serial USB interface for connecting the device to a PC. Via the delivered LogMemorizer software the measuring values can be read off the device, addition information can be added, and the data can be archived, exported and processed.  humimeter RH6 paper hygrometer – YOUR BENEFITS Absolute air humidity 0 to 130 g/m³, resolution 0.1 g/m³Temperature compensated paper and wood equilibrium moisture contentCalibration curves for determination of water contentCalibration curves for customer calibrationInc. humimeter USB data interface module with LogMemorizer software for PC Alat Laboratorium Umum

FSA Fully Automatic Whole  Grain Moisture TesterDescriptionThe FSA grain moisture tester is a fully automatic calibrateable grain moisture testerwith integrated determination of hectoliter weight and infrared sample temperature measurement.The FSA grain moisture tester is already calibrated for various sorts of grain and other products. Additionally it can be calibrated for other products on request (even special products!)Calibrated for maize, rye, triticale, wheat, durum wheat, peeled buckwheat, peeled and unpeeled spelt, peeled and unpeeled millet, sorghum millet, barley, oats, rape, soybeans, horse beans, sunflower seeds, pumpkin seeds, rice, field peas, scarlet runner beans and linseed. FeaturesMeasuring range 0 to max. 50% water content depending on the productResolution 0.01%hectoliter measurement (kg/hl)infrared sample temperature measurementtemperature can be set to °C or °F as requiredautomatic infrared temperature compensationmeasurement within seconds without prior treatment of samples7 inch colour touch displayintegrated online function, integrated printer in a robust housingdatalog for 1,000,000 logs with measuring point reportsuppliers data managementCustomer-specific calibration for special crops, granulate etc. possibleEthernet and USB data interface modulecustoms tariff number  9027.8017Dimensions  44 x 25 x 41 cm, weight 15 kgscope of supply:  FSA grain moisture tester, Ethernet, USB data interface module and integrated printerarticle no Nr.: 13000 FSA fully automatic whole grain moisture tester Accessories and ExtensionsArt.No.PictureAccessory / Extension11758 ISO measuring device check for humimeter FSA, FS2, FS3, FS4 and BP1, test medium and standard weight10600 Factory calibration certificate protocol documenting the adjustment at delivery of material moisture meters11217 Laboratory analysis testing of new material for humimeter devices12297 Entry of an existing characteristic curve in a  humimeter device13561 Schaller FSA LogMemorizer measuring data recording and analysing software on USB flash drive incl. network cable for PC FSA automatic grain moisture testerThe precise monitoring of the water content of grain is an important process, contributing significantly to ensure the product quality of food.  The measurement process with the FSA automatic whole grain moisture tester is easy and fast and guarantees accurate measuring results.Handling / measuring procedureSimply pour your sample into the filling funnel of the device and start the measurement. The FSA grain moisture meter automatically takes a representative and statically distributed sample volume and determines the measuring values within a few seconds. After completion, the sample material can easily be removed from the material drawer and a new sample can be measured.Use in practiceThe completely automatic FSA whole grain moisture meter can be used for checks directly in the field as well as for quality control in the laboratory. Independently of the application, the FSA meets the highest accuracy standards and therefore is a highly sophisticated measuring instrument for your quality control and assurance.Alat Laboratorium Umum

Humimeter FS2  Grain TesterApplicationThe humimeter FS2 grain tester is a whole grain tester with 300g sample weight and sample temperature measurement. The sample requires no treatment or preparation - simply measure 300g of grain and pour it into the grain tester.For use in farming, trade and animal feed industries. Grain moisture meter for maize, rye, Triticale, wheat, durum, peeled spelt, barley, oats, rape, pumpkin seeds, field peas, soybeans, scarlet runner beans, horse beans, Jatropha, sunflower seeds, buckwheat, peeled, unpeeled and brown rice, sorghum millet and millet. Further species on requestFeaturesMeasuring range 5 to 40% water contentResolution 0.1% water contentCalibration accuracy to reference material +/- 0.4%Hectoliter compensatedSample temperature measurmentTemperature can be set to°C or °F as requiredHold function, manual saving of results, data log for 10,000 logs with measuring point reportSupplier's data and batch number can be recordedAutomatic temperature compensationLarge, well-lit LC displayMeasurement within seconds without prior treatment of samplesRobust stainless housingMenu languages: English, German, Italian, French, Spanish, Portuguese, Czech, Polish, Russian and InternationalScope of supply: humimeter FS2 grain tester, rubber protection cover, digital scale, plastic case, measuring cup and batteriesYour benefitsVery fast and accurate duo to 300g whole grain measurmentFor all grain typesReduces your drying costsMeasuring protects against mould and resulting damagesA new and revolutionary powerful portable measuring instrument series for measuring using innovative sensor technologieBulk pack: 10 % special discount for an order of a bulk pack of 5 unitsarticle no. 11753 humimeter FS2 Grain tester Accessories and ExtensionsArt. no.PictureAccessory / Extension11758ISO measuring device check  10600 Factory calibration certificate Protocol documenting the adjustment at delivery for material moisture meters12297 Entry of an existing characteristic curve in a FS_3 or humimeter device12311 Power supply unit for continuous operation of the scale12449 rubber protection cover for humimeter case DeviceResolutionCalibrate accuracyMeasuring rangeCustomer calibrationsSample weightScaleTemperature measurementData storagePC Software + OnlinefunctionalityFS1.10,1%0,9%5 - 25% 60gXX  FS10,1%0,7%5 - 30% 60gXX  FS20,1%0,4%5 - 40% 300gXXX FS30,1%0,4%0 - 40% 300gXXXoptionalFS40,1%0,4%0 - 50%X300gXXXXFL10,5%1,0%8 - 40%   X  FL20,1%0,8%8 - 60%X  XXXBLO Sensor Grain0,1%1,0%5 - 30%   XXXHumimeter FS2 Grain TesterThe humimeter FS2 grain tester is a powerful grain moisture tester for the determination of water content of all maize and grain types.Via the integrated data logger the measuring results can be stored and additional data can be added. You also have the possibility to use the Hold function. This function freezes the last measuring value on the display of the grain tester until another button is pressed.To increase the measuring accuracy and reproducibility, the measurement is hectoliter compensated by a precise weighing of the sample quantity. For that the grain moisture meter is delivered with a scale and measuring cup, which ensures that the bulk density doesn't affect the measuring result.The whole grain tester series is calibrated and checked according to the calibratable kiln-drying method EN-ISO 712.Simultaneously, the grain tester also measures the sample temperature and includes it in the calculation of the measuring result. The temperature range goes from 0 °C to 40 °C and can be set to °C or °F as required.The calibrated measuring range of our grain testerr humimeter FS2 goes from 5% to 40% water content (depending on the product).Handling / Measuring procedureTo guarantee precise measuring values in the long run, after switching it on the FS2 grain tester will automatically calibrate itself.  After that, the corresponding calibration curve for the sample to measure can be selected at the grain tester.Subsequently, the measuring chamber of the grain tester is filled with the quantity of grain indicated in the manual. To determine the exact grain quantity our grain tester is delivered with a weighing scale and a measuring cup.  The water content can immediately be read off the large, well-lit display of the grain tester and saved or edited via the integrated datalog if required. - no time-consuming preparation of samples necessary- nondestructive measuring technique- whole grain moisture analyzerAlat Laboratorium Umum

Humimeter FS1  Grain Moisture TesterApplicationWhole grain meter with low sample volume and sample temperature measurment. For field test and for use in farming.Grain moisture meter for maize, rye, Triticale, wheat, barley, oats, rape, soybeans, horse beans, sunflower seeds, sorghum millet and millet, mustard seeds, buckwheat, peeled and unpeeled rice, raw coffee peeled and roasted coffee, further species on requestFeaturesMeasuring range 5 to 30% water content  depending on the materialResolution 0.1% water contentCalibrate accuracy +/- 0.7%Simple temperature measurmentTemperature can be set to°C or °F as requiredAutomatic temperature compensationMeasurement within seconds without prior treatment of samples Hold FunktionLarge, well-lit LC displayRobust housingScope of supply: humimeter FS1 with batteries, digital scale, measuring cup and plastic caseYour benefitVery fast to whole grain measurementFor all grain typesWithout preperation of samplesReduces your drying costsProtects against mould and resulting damagesMenu languages: English, German, Italian, French, Spanish, Russian and many others on requestBulk pack: 10 % special discount for an order of a bulk pack of 10 unitsarticle no. 11752 humimeter FS1 grain moisture testerDeviceResolutionCalibrate accuracyMeasuring rangeCustomer calibrationsSample weightScaleTemperature measurementData storagePC Software + OnlinefunctionalityFS1.10,1%0,9%5 - 25% 60gXX  FS10,1%0,7%5 - 30% 60gXX  FS20,1%0,4%5 - 40% 300gXXX FS30,1%0,4%0 - 40% 300gXXXoptionalFS40,1%0,4%0 - 50%X300gXXXXFL10,5%1,0%8 - 40%   X  FL20,1%0,8%8 - 60%X  XXXBLO Sensor Getreide0,1%1,0%5 - 30%   XXXhumimeter FS1 grain moisture testerThe humimeter FS1 grain moisture tester is a powerful and handy humidity measuring instrument for grain, for determining the water content of many grain types. Thanks to the Hold function the measuring value can be frozen on the display of the grain moisture tester until another button is pressed.To increase the measuring accuracy and reproducibility, different hectolitre weight classes are stored in the device. This ensures that the bulk density doesn´t affect the measuring result. The whole grain moisture tester series is calibrated and checked according to the calibratable kiln-drying method EN-ISO 712.Simultaneously, the moisture meter for grain also measures the sample temperature and includes it in the calculation of the measuring result. The temperature range goes from 0 °C to 40 °C and can be set to °C or °F as required.The calibrated measuring range of our humimeter FS1 moisture meter for grain goes from 5% to 30% water content (depending on the product).handling / measuring procedure  To guarantee precise measuring values in the long run, after switching on the humimeter grain moisture tester automatically effects a self-calibration.  After that, the corresponding calibration curve for the sample to measure can be selected at the moisture meter for grain. Subsequently, the measuring chamber of the humidity measuring instrument for grain is filled with the quantity of grain indicated in the manual. To determine the exact grain quantity the humimeter device is delivered with a balance and measuring cup.  The water content can immediately be read off the large, well-lit display of the grain moisture tester. - no time-consuming preparation of samples necessary- non-destructive measuring technique- whole grain moisture tester  Alat Laboratorium Umum

G110 Analytical Balance and Moisture AnalyzerThe moisture analyzer G110 is an analytical balance for determining the moisture content of various materials. The weighing range of 110 grams with a precision of 0.01 grams allows for accurate measurements of small, unknown, fluid or pasty materials humimeter devices cannot be calibrated for.The moisture analyzer uses a heating chamber to dry the material with temperatures of up to 199°C. Once the automatically terminating drying process is done the moisture analyzer calculates the moisture content based on the mass difference.This process is highly accurate but tedious. That's why we recommend our product finder which recommends one of our numerous specialized products based on the material you want to measure. Our specialized products offer practical handling, mobility and blazingly fast highly accurate results. If you don't find any suitable product, the G110 moisture analyzer still is the way to go.FeaturesWeighing range 110 gramsPrecision 0.01 gramsMoisture content 0-100% with a precision of 0.01%Heating chamber with temperatures from 40 to 199°CThe heating chamber is configurable via 15 custom drying-programs, each ranging from 1 to 99 minutes and custom temperaturHeating chamber with halogen lampsRS-232 interface for connecting to other devices (e.g. PCs)LCD display, 9 buttonsDimensions: 200 x 180 x 380mmPower supply 220V / 50 Hz or 110V / 60 HzScope of delivery: Moisture analyzer, wind protection, sample cups, power cord, sample cup holder, 100 grams calibration weight, user manualYour benefitsFully automatic: drying until constant weight15 custom drying-programs for free configuration of the moisture analyzerThe moisture analyzer works reliably and fully automatic with easy handlingarticle no.: 12153 Moisture analyzer and analytical balance G110Accessories and ExtensionsArt. no.PictureAccessory / Extension12154Probe bowls for moisture analyzer, packing unit of 100pcs.Analytical balance and moisture analyzerThe G110 moisture analyzer for various materials with a fully automatic measuring process works as follows.HandlingThe moisture analyzer is an analytical balance for determining the moisture content of materials. Start by taking an appropriate amount of your material and pouring it into the measuring bowl.After putting the bowl into the moisture analyzer the analytical balance weighs the material and starts the measuring process. The moisture analyzer dries the material automatically until the weight is constant and stops automatically when it's done.The results are displayed on the display of the moisture analyzer.Alat Laboratorium Umum