STUART

SMP50 Automatic Melting PointIn the Stuart SMP50 Automatic Melting point the latest digital camera technology is employed to produce a high resolution video of the sample melt, this allows the intelligent melt algorithm to identify the smallest of changes within the sample, accurately and reliably determining the melting point of up to three samples simultaneously.The SMP50 has a custom designed user interface based on an established Android platform for intuitive setup and navigation. The familiar elements of an Android operating system help the user to feel comfortable, with everything where you would logically expect it. All operation is via the 7" high definition colour touchscreen. Once programmed, users can leave the SMP50 to complete the melt analysis independently, alternatively the melt can also be observed on the screen live or post melt. During post melt review additional measurement tags can be added if required, such as meniscus point or the automatically obtained result can be overwritten.A generous 8GB on board storage is included, which should comfortably hold approximately 300 melts files including videos. Results can also be transferred via USB stick on to PC for a more permanent long term record. All video files include a temperature stamp, so whatever device you view them on you can confirm the automatically obtained result.The SMP50 features a useful storage drawer to house all standard capillary tubes. The drawer also contains a small glass cutter that can be used to accurately cut sample tubes in half, for those users who prefer not to use whole tubes. Not only will the glass cutter always get the cut in the centre of the tube, but it will also reliably give a clean cut making sample loading cleaner and safer. Technical SpecificationSMP50No of samples3 simultaneouslyTemperature rangeAmbient to 400 °CTemperature resolution0.1 °CDisplay7 inch HD ColourRamp rates0.1-20°C in 0.1°C incrementsTemperature sensorPT1000 Platinum resistanceMemory8GB (approx. 300 results with video)Cool down time 350-50°C~12 minsHeat up time 50-350°C~ 6 minsOven controlClosed loop PIDData transferUSB Flash driveSample level2-3mm in 50mm or 100mm length capillariesElectrical supply120V 230V, 50-60HzTemperature units°C or °FSize (h x d x w)164 x 360 x 300mmNet Weight4.6KgLanguagesEnglish, French Product codeDescriptionSMP50Automatic melting pointSMP50 / IQOQAutomatic melting point with IQ / OQ documentationSMP50 / PRINTERAccessory PrinterSMP2 / 1Glass melting point tubes, closed at both ends, pack of 100SMP10 / 1Glass melting point tubes, closed at one end, pack of 100SMP-KITMelting point calibration kit, Consists of three WHO approved melting point standards, caffeine, vanillin and sulphanilamide with purity certificates.  Alat Laboratorium Umum

Stuart Digital Water Baths SWB6D SWB15D SWB24DChoice of sizes: 6, 15 or 24 Litres• Digital display and selection of temperature• Low level water sensor• Integral drain• Supplied with robust polycarbonate lidThree robust and reliable water baths, each with easy to clean stainless steel tank and sturdy metal outer casing.Digital water baths with easy to use temperature control and clear to read LED water temperature. Incorporated over temperature protection system that tracks the set temperature and controls the heater in the event of a fault. The heater is mounted underneath the tank to allow easy cleaning. Includes low level water sensor which cuts power to prevent the bath boiling dry. Incorporated drain for easy emptying of the bath. Minimum set temperature is 25°C.Bath covers are included as standard with each bath to help reduce heat losses and evaporation. The covers are manufactured from robust polycarbonate allowing full visibility of the bath contents.  SWB6DSWB15DSWB24DCapacity6L15L24LTemperature range+25°C to 99.9°C+25°C to 99.9°C+25°C to 99.9°CTemperature stability± 0.5°C± 0.5°C± 0.5°CInternal dimensions (w x d x h),mm300 x 150 x 200300 x 325 x 200300 x 500 x 200Overall dimensions (w x d x h), mm335 x 230 x 280335 x 408 x 280335 x 584 x 280Net Weight, kg6.5kg9.0kg12.8kgHeater Power350W750W1400WElectrical supply230V, 50Hz230V, 50Hz230V, 50HzIP Rating313131 ModelDescriptionSWB6DDigital water bath 6LSWB15DDigital water bath 15LSWB24DDigital water bath 24LSWB6/ 1Stainless Steel lid for 6L bathSWB15/ 1Stainless Steel lid for 15L bathSWB24/ 1Stainless Steel lid for 24L bathSWB6D/ 1Polycarbonate lid for 6L bathSWB15D/ 1Polycarbonate lid for 15L bathSWB24D/ 1Polycarbonate lid for 24L bath    Alat Laboratorium Umum

Stuart Colony Counter - SC6PLUSPressure sensitive counting• Average count facility• Bright white energy saving LED lighting• With BioCote antimicrobial protection• Audible count confirmation• Choice of light or dark background• Connectivity to printer or computerTouch pressure with felt tip marker on petri dish registers cumulative count on the digitaldisplay with confirmation by audible tone (can be turned on or off). The pressure required to register a count can be adjusted to suit each user.Averaging facility calculates average count over multiple plates. Counting results as well as useful statistics including SD can be sent directly to the accessory printer or to a computer via a USB cable supplied.Sub-stage illumination by low energy bright LED's allows glare-free optimum viewing. A switchable black background is provided to enhance viewing of translucent and difficult to see colonies. Supplied with two Wolffhuegel graticules and dish centering adapters to facilitate use with 50mm to 90mm dishes. A choice of magnifiers and a printer are available as optional accessories.Technical SpecificationLightingWhite LED arrayDigital display3 digit LEDCount0 to 999Dimensions (w x d x h)310 x 300 x 140mmNet weight1.5kgElectrical supply90 to 240V, 50/ 60Hz, 70W      Ordering InformationModelDescriptionSC6PLUSColony counter, advancedSC6/ 11.7x magnifierSC6/ 1/ 33x magnifierSC6/ 2Wolfhuegel graticule and segmentation discs (pack of 10)SC6/ 3Spare dish centering adaptors (pack of 2)SC6/ 4Clear protective discs (pack of 5)SC6/ 5Spare receiving dishSMP30/ 1Accessory Printer    Alat Uji Micro Organisme

Stuart SMP11 Melting Point Apparatus, Analogue Easy to operate - ideal for educational useSupplied with safe spirit filled thermometerEconomical priceWith new safety features and easy to use, the SMP11 is ideal for use in education.Supplied with a safe, spirit filled mercury free thermometer, the low toxic blue spirit will not pose a health hazard in the event of a breakage. Easy to follow instructions are printed directly on to the apparatus and are available in most European languages.With a manually adjustable heating rate, the SMP11 will rapidly heat samples up to 20°C per minute to the melt temperature and up to the maximum temperature of 250°C. Accurate readings to within 1°C of the melt temperature can be achieved by using a slower heating rate of between 1 and 10°C per minute.Up to three samples can be viewed and tested at any one time. Samples are illuminated by a bright white LED and viewed via a magnifying lens. The magnifying lens can be detached for cleaning using the simple to follow instructions printed on to the instrument. No. of samplesUp to 3Temperature range50 to 250°CHeating rate1 to 10 °CminDimensions (w x d x h)370 x 140 x 110 mmNet weight1.7kgElectrical supply230V, 50Hz, 50W Melting point tubesMade from soda glass, these tubes are easy to seal in a Bunsen flame and break into two. Supplied in robust tube holder, pack of 100 tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner diameter = 1.3mm and wall thickness = 0.3mm. ModelDescriptionSMP11Melting point Apparatus, complete with thermometer and pack of 100 melting point tubes (open both ends)SMP11/ 1Spare thermometer, spirit filled, 50°C to 250°CSMP1/ 2Cooling plug (brass) for rapidly reducing heating block temperature after useSMP1/ 4Glass melting point tubes, open at both ends, pack of 100SMP2/ 1Glass melting point tubes, closed at both ends, pack of 100SMP10/ 1Glass melting point tubes, closed at one end, pack of 100  Alat Laboratorium Umum

STUART HM Series of Heating MantlesControlled up to 450ºC- Range of sizes available- Tough lightweight, easy to clean aluminium casing- Integrated clamp fittingThe HM series are a range of controlled heating mantles, available in a range of sizes to accommodate round bottom flasks from 50ml to 1000ml. The entire range is constructed with a robust aluminium casing, making them tough and easy to clean.All units feature an integrated clamp rod fitting to enable secure fitting of a standard clamp rod. Non slip feet are also fitted as standard.For added safety, all units feature an emergency cut out which will automatically trigger in the event of a spillage.Technical specification ModelFlask CapacityDimensions, mm (d x w x h)Electrical supplyHM50C50ml175 x 175 x 150230V, 50/ 60Hz 75WHM100C100ml175 x 175 x 150230V, 50/ 60Hz 100WHM250C250ml175 x 175 x 150230V, 50/ 60Hz 200WHM500C500ml220 x 220 x 170230V, 50/ 60Hz 280WHM1000C1000ml220 x 220 x 170230V, 50/ 60Hz 380W Ordering Information  ModelDescriptionHM50CControlled heating mantle for 50ml flasksHM100CControlled heating mantle for 100ml flasksHM250CControlled heating mantle for 250ml flasksHM500CControlled heating mantle for 500ml flasksHM1000CControlled heating mantle for 1000ml flasks Alat Laboratorium Umum

STUART Microcentrifuge, SCF3Variable speed microcentrifugeMaximum speed 15,000rpm (15,596 x g)Timer and pulse start12 tube capacityCompact and quietLid safety mechanismBioCote® antimicrobial protectionThe SCF3 is a compact microcentrifuge for centrifugation of up to 12 x 1.5ml or 2.0ml microtubes or two strips of 8 x 0.2ml tubes* at speeds of up to 15,000rpm. Measurement parameters can be easily tracked via the large backlit LCD display. Simple control is achieved through the easy to use interface. The SCF3 is supplied with two sets of adaptors for use with the fixed angle rotor to securely hold smaller tube sizes of 0.2-0.3ml and 0.4-0.5ml tubes. The unit features a convenient last run memory feature, allowing quick and easy resumption of the last used parameters.Centrifugation speed can be displayed as either rpm or rcf, runs can be continuous or timed between 1 and 999 minutes. The unit includes a USB port for connection to a PC for remote operation, programmable run profiles can be created in the included software.In addition, a short spin or pulse button enables a rapid spin down by accelerating the rotor to the preset rpm then promptly decelerating.For safety, the door of the SCF3 remains locked while the rotor is in motion and automatically releases when the rotor comes to a halt.*An accessory strip tube rotor is also available separately, which can accommodate 2 x 0.2ml 8-tube strips. ModelSCF3 FixedSCF3 StripMaximum speed, rpm15,000rpm15,000rpmMaximum RCF15,596 x g15,596 x gMaximum capacity12 x 1.5 or 2.2ml tubes2 x 0.2ml 8-tube stripsTimer1 to 30 min (1 min intervals)1 to 30 min (1 min intervals)Acceleration time< 12s (to full speed)< 12s (to full speed)Deceleration time< 16s (fully stopped)< 16s (fully stopped)Noise level< 60dB< 60dBSafetyDoor lockDoor lockPower220V, 5060Hz220V, 5060HzDimensions, mm (w x d x h)262 x 230 x 131262 x 230 x 131Weight, kg4kg4kg ModelDescriptionSCF3Microcentrifuge, (0 to 15,000rpm)SCF3/ 2Strip tube rotor, 2 x 0.2ml 8-tube stripsSCF3/ 1/ 050.5ml tube adaptorsSCF3/ 1/ 020.2ml tube adaptors   Alat Laboratorium Umum

STUART Flocculators - SW5, SW6A mini version of the SW6 that accepts two samples (without timer function). The case incorporates a handle for easy transportation.Accepts six samplesDigital indication of speed and timeTwo pre-set programsBuilt in illumination for easy viewing of samplesFor flocculation (jar) tests on water and effluent samples. The SW6 accommodates up to six samples and is specially designed for repeatable conditions between samples and from run to run.A digital display clearly indicates the speed of the rotational stainless steel paddles, which can be varied from 25 to 250rpm. The digital timer can be set to count down from 1 to 99 minutes. After count down, the paddles stop and an alert sounds. The timer then counts up in minutes in order to measure settling time. Two pre-set programs allow routine speed and time parameters to be input and then selected by simply pressing one button. Parameters are stored in the memory and can be recalled or altered at any time. The intuitive touch sensitive keypad is totally flat for easy cleaning. Sample monitoring is assisted by diffused base illumination and black background.A simultaneous coagulant doser is available as an accessory.  SW5SW6No. of samples26Speed range25 to 250rpm25 to 250 rpmTimerNo0 to 99 minutesPre-set programs22Controls keypadDialTouch sensitiveDigital displaysLCDLEDDimensions (w x d x h)320 x 210 x 500mm750 x 210 x 460mmNet weight8.6kg17kgPower230V , 50Hz, 100W230V, 50Hz, 200W ModelDescriptionSW6Flocculator with 6 rotators (without beakers)SW5Flocculator with 2 rotators (without beakers)SW6/ 2Simultaneous coagulant doser (SW6 only)   Alat Laboratorium Umum

Handheld Homogeniser - SHM1 Ergonomic designVariable motor speed 5,000 to 35,000rpmProcessing range from 0.03ml-100mlCan be used with robust polycarbonate disposable probes or stainless steel onesThe Stuart® SHM1 is a powerful, variable speed, homogeniser. The high-speed, high-torque motor makes the unit ideal for most homogenising applications. During operation the rotor shaft, which is directly coupled to the motor, spins at up to 35,000rpm. The tube assembly that fits around the shaft remains static and as the rotor shaft spins, within the tube assembly, it creates a pumping action drawing the sample into the open end of the tube, or probe, and forcing it through the windows at the bottom of the tube assembly. This shearing action reduces the particle size of the sample. In addition the speed differential between the rapidly moving rotor, and the static tube assembly creates cavitational force, further dismantling the sample to additionally reduce particle size.The SHM1 is lightweight making it comfortable to use, and most samples can be processed within thirty seconds. For longer processing the unit can be stand mounted using the included post clamp assembly. A retort stand is available separately.The SHM1 can accommodate a selection of stainless steel probes for larger and tougher samples and also our polycarbonate disposable probes. The SHM/ADAPT adaptor is required to use the disposable probes with the SHM1, however each purchase of a SHM1 incudes a complimentary SHM/ADAPT adaptor. Disposable probes are suitable for hard tissues and ideal where cross contamination is of concern. If necessary disposable probes can be easily dismantled and autoclaved up to seven times. Through careful selection of probe type, samples of 0.03ml to 100ml can be processed.All Stuart® homogenisers are supplied with a tool kit for dismantling the rotor probes for easy cleaning. Motor125 wattSpeed Control5,000 to 35,000rpmProcessing Range0.03ml to 100mlSound level<72dBNet Weight, kg0.5Dimensions, mm (hxø)160 x 55Electrical supply220-240,50HzIP Rating30 ModelDescriptionSHM1/UKHandheld homogeniser, UK plugSHM1/EUROHandheld homogeniser, European plug   Alat Laboratorium Umum

STUART Laboratory Homogeniser - SHM3Variable motor speed 5,000 to 25,000rpmCan be handheld or stand mountedProcessing range from 200ul to 5LPowerful 850 watt motorCompatible with Stuart range of disposable probesWith an 850 watt motor, the Stuart SHM3 is not only powerful but provides maximum versatility being able to process virtually any sample, from tissue homogenisation, cell disruption, emulsions, suspensions to protein extraction. The SHM3 features a digital control system, ensuring accuracy and repeatability, selected speeds are accurate to +/- 100rpm. The digital control system also incorporates a timer which can be set from seconds to minutes and includes a 30 second countdown timer, ideal for remote applications in fume hoods or biosafety cabinets. Soft start also ensures smooth processing without splashing.The SHM3 can either be handheld for quick processes or securely stand mounted with a direct connection to the SHM/STAND.The SHM3 can not only, accommodate a selection of stainless steel probes for larger samples, but also the Stuart reusable polycarbonate disposable probes. Disposable probes are suitable for hard tissues and ideal where cross contamination is of concern. If necessary disposable probes can be easily dismantled and autoclaved up to seven times. Through careful selection of probe type, samples of 200ul to 2L can be processed.All Stuart homogenisers are supplied with a tool kit for dismantling the rotor stator generator probes for easy cleaning.Click here for a selection of compatible probes for your Stuart SHM3 homogeniser ModelSHM3Motor850 wattControlDigitalTimer1s - 10 min with 30s start delaySpeed control5,000 to 25,000rpmProcessing range200ul to 2LSound level72 dbWeight1.6kgDimensions (h x Ø)216 x 70mmElectrical supply220 -240V, 50Hz   Alat Laboratorium Umum

 STUART Hotplate with Stirrer, UC152 and US152  • Choice of top plate:- Robust coated aluminium- Chemically resistant ceramic• Flashing "Hot" warning light, mains independent• Accurate temperature control with LED indicator scale• Compact space saving designStylish and economical general purpose hotplate stirrers designed with safety as well as performance in mind. The compact shape takes up less bench space and makes storage easier. The hotplate has an innovative LED temperature indicator scale and can also be used in conjunction with the SCT1 digital contact thermometer to accurately control sample temperature.The "Hot" warning light will flash whenever the plate temperature is above 50°C even when the hotplate is turned off and unplugged from the mains. Powerful magnets and motor give stirring speeds up to 2000rpm and is capable of mixing large volumes (up to 15 litres *).Model UC152 has a glass ceramic top which has excellent chemical resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes.Model US152 has a robust aluminium/silicon alloy top plate for excellent heat transmission. The top plate has a thin ceramic coating for added chemical resistance. A 700W element gives rapid heating and ensures even temperature distribution across the whole surface of the plate.Both models have an integral fitting for a retort rod and are supplied with 2 x 25mm PTFE coated stir bars. Technical SpecificationModelUS152UC152Plate MaterialCoated AluminiumSiliconGlass ceramicPlate Dimensions, mm150 x 150150 x 150Heated Area, mm150 x 150120 x 120Heater Power, Watt700500Max plate temp, °:C325450Stirrer Speed, rpm100 - 2000100 - 2000Maximum Stirring Capacity, L *1515Dimensions (w x d x h), mm172 x 248 x 120172 x 248 x 122Net weight, kg2.92.9Electrical supply230V, 50Hz, 750W230V, 50Hz, 550WIP Rating3232 Ordering Information ModelDescriptionUS152Stirrer/ hotplate, coated aluminium plateUC152Stirrer/ hotplate, ceramic plate  US152/ 220/ 60Stirrer/ hotplate, coated aluminium plate, 220V versionUC152/ 220/ 60Stirrer/ hotplate, ceramic plate, 220V versionSCT1Digital contact thermometerSR1Retort rod, 600mm x 12mm diameter  Alat Laboratorium Umum