TPI

TPI 623 Dual Input Differential Manometer0.001 inH2O / kPa resolution up to +/-9.999 inH2O / kPa inputAccuracy: ±0.02 inH2O (< 2 inH2O) ±1% (> 2 inH2O)Dual input differentialAutorangingSeven selectable units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O) Backlit Display Model 623 SpecificationsMeasurement Range±40 inH2OMax Over pressure±50 inH2OAccuracy±0.02 inH2O ( < 2 inH2O )±1% rdg ( > 2 inH2O )Minimum pressure displayed±0.01 inH2OResolution0.001 inH2OStorage temperature-10 ~ 50°CRelative Humidity0 ~ 90%Power Supply9VAuto Power Off20 minutesInput typeDifferentialTrim ModeYesMin/MaxNoUnit7 (kPa, psi, inHg, mmHg, inH2O, mmH2O, mbar)Data HoldNoBack LightYesMeasurementsSensitivityinH2O±40mbar±100kPa±10psi±1.4mmH2O±1016mmHg±75inHg±2.9Tech SpecsHVAC Equipment and Instruments/Manometer TemplateType (Manometer)DigitalMax Pressure1.45 psi (40.14 IN of H2O)Type of InputDual, SingleEngineering Units (HVAC)inch H2O, inch Hg, kPa, mmH2O, mmHg, psi MeasurementAbsolute, Differential, VaccumMin/Max/HoldNoTest Equipment General AttributesUnique FeaturesTPI 621 Kit, which also includes:A605 T Fitting (x2): Ideal for use on setting pressure switchesA776 Static Tip (x2): Measure static pressure with A776. It has a magnet to secure in place in duct work 1/4” hole required to useA774 Tubing: 6 foot length of silicone tubing for pressure measurements. Very flexible and will not go hard in cold temperatures.A791 Adapter Tube: Flexible tubing for connecting to larger fittingsA908 Carrying Case: Soft padded case with shoulder strap holds the thermometer and probes.Warranty3 YEARSSafety ApprovalCEBattery Type9vPower Supply VoltageBattery Powered In The Box9V Alkaline battery (A009A)Soft Pouch (A600)Protective boot with magnets (A6XX)Silicone tubing w/ 1/4” barbed 1/8” NPT fitting (A603)Alat Laboratorium Umum

TPI 621 Dual Differential Input ManometerDual input with +/-120" H2O range0.001" H2O maximum resolutionSeven units of measure (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)Display - 5 digit with backlightSmooth - Stabilizes display when measuring fluctuating pressures.Auto Off - Conserve battery power ModelTPI 621TPI 621C3Measurement Range+/-120 H2ODisplay5 Digit LCD with backlightInput TypeDual Differential (1/4” Barbed)Dual Differential (1/4 Barbed)Resolution (max)0.001 H2OAccuracy-40.2 to 40.2 inH2O: ±(0.2% of full scale)<-40.2 & >40.2 inH2O: ±(1% of reading)+/-0.2% of full scaleFunctionsOne Touch Zero, Back-light, SmoothingOne Touch Zero, Back-light, Unit Selection, Smoothing, Auto power OffUnits of Measure1 Unit (inH2O)7 Units (mbar, kPa, PSI, mmHg, inHg, mmH2O, inH2O)Battery Type9V alkalineBattery Life80hours (Typical)Auto Power Off40 minutesStandard Accessories (Included)9V alkaline battery (A009A), two pieces 30 silicone tube (A613), two 1/8 NPT to 1/8 barbed fittings (A603)Tech SpecsHVAC Equipment and Instruments/Manometer TemplateType (Manometer)DigitalMax Pressure4.34 psi (120.13 IN of H2O) Type of InputDual, SingleEngineering Units (HVAC)inch H2O, inch Hg, kPa, mmH2O, mmHg, psi MeasurementAbsolute, Differential, VaccumMin/Max/HoldNo In The Box9V alkaline battery (A009A)Two pieces30" silicone tube (A613)Two 1/8" NPT to 1/8" barbed fittings (A603)Soft Pouch (A600)Alat Laboratorium Umum

TPI 1010a Co2, Co, Temperature, Humidity Iaq Meter With Pc Data Logging Software And Usb CableMeasure ambient CO2, temperature, relative humidity, dew point, wet bulb, CO, and calculate percentage outside air. The TPI 1010A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices. The 1010A IAQ meter uses state of the art sensors to measure carbon dioxide (CO2), and temperature.The 1010A IAQ meter uses state of the art sensors to measure humidity, carbon dioxide (CO2), and temperature. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.ApplicationsCheck ambient CO and CO2 levels in work and living spacesMonitor results of air control systemsAmbient air temperature and humidityTest dew point and wet bulb humidity Model 1010A IAQ Meter SpecificationsFunction: CO2Range: 0 to 5000ppmAccuracy: 50°F~104°F: ±5% of rdg+75ppm<50°F, >104°F: ±10% of rdg+75ppmFunction: TemperatureRange: -5°F to 140°F-20°C to 60°CAccuracy: ±2°F±1°CFunction: Dew Point TemperatureRange: -47°F to 135°F-44°C to 57°CAccuracy: Calculation±1°CFunction: Wet Bulb TemperatureRange: 3°F to 135°F-16°C to 57°CAccuracy: CalculationFunction: Relative HumidityRange: 5% to 95%Accuracy: ±2°F±1°CFunction: CORange: 0 to 500ppmAccuracy: ±3ppm or ±5% of rdg whichever is greaterFunction: % Outside AirRange: 0 to 100%Accuracy: CalculationData LoggingUp to 4,000 samples 1 sec to 23hr 59min intervalDisplay Type3 line with annunciators and backlightCO2 AlarmAudible and visual, selectable level (factory default 30ppm)Operating Temperature & HumidityCO and CO2: 14°F to 122°F (-10°C to 50°C)All Other Function: -4°F to 140°F (-20°C to 60°C)Humidity 15 ~ 95% non-condensingStorage Temperature-4°F to 140°F (-20°C to 60°C)Power supply3 AA batteries ( 4.5V)AC/DC adapter 5Vout (Center positive)Battery Life: 40 hours typical without backlightOutputSerial output via USB connectionInfrared output to optional A740 printer In The BoxTPI 1010A InstrumentProtective Rubber Boot (A800)Soft Carrying Case (A921)USB Cable & Software (A803)Instruction ManualAlat Laboratorium Umum

TPI 707 Carbon Monoxide Analyzer1 ppm sensitivityMeasures from 0 to 10,000 ppmPush on fittings are fast and easy to use.Large, easy-to-read, backlit display.Advanced electrochemical sensor is field replaceable and calibrateable.Clear and fast response with advanced pump driven technology.Peak Hold to capture peak CO reading.Instrument recycles and will not shut off if 15ppm CO is present, increasing safety.Store Button allows you to save up to eight readings and then print using the IR port and optional A740 printer.Protective rubber boot and soft carrying case with shoulder strap included. SpecificationsPower Supply3 "AA" Alkaline BatteriesSensorElectrochemical (2 year warranty)Range0 to 10,000ppmWarm UpApprox. 20 secondsResponse Time90% of reading < 60 secondsDuty Cycle30 minutesBattery LifeApprox. 30 hoursSize3.75” x 8” x 3” (95 x 203 x 76 mm)Weight1.1 lbs. (500g)Probe Length9” (230mm)Tube Length5’ (152.4 cm)  706 Advanced High CO Meter707 Advanced CO Meter770 Carbon Monoxide Monitor775 Ambient CO & Combustible Gas Leak DetectorA771 Carbon Monoxide Adapter for DMMsMeasurement & RangesCO: 0 to 9,999 ppm, over 9,999 ppm readout in % 1.0 to 9.9 (9.9% = 99,999 ppm)CO: 0 to 9,999 ppmCO: 0 to 9,999 ppmCO: 0 to 2,000 ppmMethane: >50 ppmCO: 2,000 ppmQuick & Easy OperationYesYesYesYesYesDisplayEasy-to-read, 3-line LCDEasy-to-read, 3-line LCDEasy-to-read, 3-line LCDEasy-to-read, 3-line LCDN/APrinting CapabilityUse Optional A740 IR Printer for real-time, date stampUse Optional A740 IR Printer for real-time, date stampN/AN/AN/AAlarmN/AN/AVisual & AudibleVisual & AudibleVisual & AudibleOtherPump-driven for fast response. Push-on fittings for fast and easy use.Pump-driven for fast response. Push-on fittings for fast and easy use.Tilt-stand on back.Visual & audible tic rate to pinpoint leak. 16” goose- neck probe.Use with any DMM with 2 1/2 digit LCD, 2 or 4 V DC range, and 10 M OHM or greater input impedance.ApplicationsTest forklift exhaust gasses for the presence and location of CO leaks.Measure CO levels in the flue, and test ambient CO levels in homes, offices, and other confined spaces.Measure and monitor ambient CO levels in homes, offices, and other confined spaces.Measure ambient CO levels. Check for CO in and around combustion sources; locate combustible gas leaks.Detektor Gas

TPI 775 Combination Ambient Carbon Monoxide & Combustion Gas Leak DetectorSpecificationsGeneralAlarmsVisual and AudibleResponse TimeCO 90% in 30 seconds/Leak InstantaneousGoose Neck Length16” (406mm)Dimensions9.5” x 2.9” x 2.2” (240mm x 74mm x 55mm)Power2C Alkaline BatteriesPower ConsumptionAbout 400mW in typical useOperating and Storage Temperature32° to 120°F (0° to 50°C)Warranty3 yearsStandard AccessoriesSoft Carrying Case, Manual, 2C Alkaline BatteriesOptional AccessoriesEarphones  706 Advanced High CO Meter707 Advanced CO Meter770 Carbon Monoxide Monitor775 Ambient CO & Combustible Gas Leak DetectorA771 Carbon Monoxide Adapter for DMMsMeasurement & RangesCO: 0 to 9,999 ppm, over 9,999 ppm readout in % 1.0 to 9.9 (9.9% = 99,999 ppm)CO: 0 to 9,999 ppmCO: 0 to 9,999 ppmCO: 0 to 2,000 ppmMethane: >50 ppmCO: 2,000 ppmQuick & Easy OperationYesYesYesYesYesDisplayEasy-to-read, 3-line LCDEasy-to-read, 3-line LCDEasy-to-read, 3-line LCDEasy-to-read, 3-line LCDN/APrinting CapabilityUse Optional A740 IR Printer for real-time, date stampUse Optional A740 IR Printer for real-time, date stampN/AN/AN/AAlarmN/AN/AVisual & AudibleVisual & AudibleVisual & AudibleOtherPump-driven for fast response. Push-on fittings for fast and easy use.Pump-driven for fast response. Push-on fittings for fast and easy use.Tilt-stand on back.Visual & audible tic rate to pinpoint leak. 16” goose- neck probe.Use with any DMM with 2 1/2 digit LCD, 2 or 4 V DC range, and 10 M OHM or greater input impedance.ApplicationsTest forklift exhaust gasses for the presence and location of CO leaks.Measure CO levels in the flue, and test ambient CO levels in homes, offices, and other confined spaces.Measure and monitor ambient CO levels in homes, offices, and other confined spaces.Measure ambient CO levels. Check for CO in and around combustion sources; locate combustible gas leaks.Detektor Gas