AEMC Simple Logger® II Model L101
Cat. No.2126.02
The Simple Logger®II Model L101 is a one channel recording device powered by an alkaline battery pack. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of ±2Hz around the nominal line frequency 50 or 60Hz. Harmonic measurements are calculated from these 64 samples. Harmonics are only available from the Simple Logger®II Control Panel within the free DataView®software included with the unit. The L101 records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the inputs are ignored between measurement intervals.
Specifications
Channels | One |
Input | BNC |
Ranges (2) | 10mV to 1VAAC |
Accuracy (50/60Hz) | 10 to 50mV ±(0.5% R +1mV) 50 to 1000mV (0.5% R +0.5mV) |
Resolution | 0.1mVAC |
Maximum Input Voltage | 5Vrms or ± 7.07VPEAK |
Input Impedance | 800kΩ |
Sample Rate | 64 samples / cycle |
Storage Rate | Programmable from 125ms to 1 per day |
Storage Modes | Start/Stop, FIFO, extended mode (XRM) and Alarm |
Recording Length | 15 minutes to 6 weeks, programmable using DataView |
Memory | 240,000 measurements (512KB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed. |
Communication | USB 2.0 optically isolated |
Power Source | 2x1.5V AA (LR6) alkaline batteries |
Battery Life | 100 hours to >45 days (depending of sample rate/recording length) |
Dimensions | 5.38 x 2.75 x 1.28” (136 x 70 x 32mm) |
Sensor | Optional current probe with BNC output (SR661, SL261, MN261) |
Weight (with battery) | 6.4 oz (180g) |
Case | Polycarbonate |
Operating Temperature | 14° to 122°F (-10° to 50°C) |
Storage Temperature | -4° to 140°F (-20° to 60°C) |
Relative Humidity | Up to 85% @ 95°F (35°C) |
Ingress Protection (IP) | IP40 |
EMC | EN 61326-1 |
Safety Compliance | IEC 61010-1, EN 61010-2-32 600V CAT III; Pollution Degree 2 |
Recommended Probes:
MN379T
SR661
JM861
Other probes are compatible when using BNC adapter cat.# 2118.46.
Multimeter